PROAIM UC-01 Snap Rig Universal DSLR Camera Cage Rig with Top and Side Handles Instruction Manual
- June 14, 2024
- PROAIM
Table of Contents
PROAIM UC-01 Snap Rig Universal DSLR Camera Cage Rig with Top and Side
Handles
Specifications
- Product Name: SnapRig Universal DSLR Camera Cage Rig with Top & Side Handles (UC-01)
- Package Contents:
- 1 x Wooden Handle
- 1 x Proaim SnapRig DSLR Camera Cage
- 1 x Side Rod
- 1 x Top Handle
- 3 x Allen Keys Sizes: (3mm, 3/16mm & 4mm)
- Material: High-Grade CNC Aluminum
- Compatibility: DSLR Cameras
- Mounting Threads: 1/4-20 and 3/8-16
Product Usage Instructions
Height Adjustable Cage Setup
To set up the height adjustable cage, follow these steps:
-
Match the wooden side handle to the thread of the slide rod of the camera cage, and then attach it by aligning the thread through both the knobs of the side handle and properly tighten the knobs equally.
-
Wooden side handle has been properly attached to the slide rod of the camera cage.
-
Mount the top handle by aligning it with the thread of the plate.
NOTE: You Can mount the top handle on the top plate, according via the Mounting Threads. -
After placing the top handle on the top plate, insert the button head by matching the bolt to the side threads of the handle and then properly tighten it using the 4mm Allen key.
Interchange Side Rods
NOTE: It comes with two interchangeable side support rods of different
heights that mount to a 15mm rod clamp and let you adjust the cage’s height to
best fit your camera. These side rod connects to cheese-style top plate and
baseplate and let them slide up and down to adjust the interior height
- Remove the side bolt of the Camera Cage with slide rod, using the Allen key, as shown in the image.
- Remove the wooden side handle by loosening its knob.
- Remove the slide rod (145mm) by loosening the bottom bolt of the rod, using the 4mm Allen key.
- Mount the side rod (125mm) on the quick release with the rod mount and then properly tighten it using the Allen key.
- Insert the top quick release with the rod mount on the side rod and then properly secure it using the Allen key.
- Match the wooden side handle to the thread of the slide rod of the camera cage, and then attach it by aligning the thread through both the knobs of the side handle and properly tighten the knobs equally.
NOTE: Camera cage offers better mobility, comfy handheld use, tripod and accessories mounting Flexibility. - Insert the rod by loosening the knob of the top handle and matching the hole of the handle.
- After inserting the rod, secure the top handle by re-tightening its knob.
- Here is the proper assembled image of the Camera cage.
DSLM Camera Cage Setup
The DSLM camera cage setup is as follows:
- Remove the top handle by loosening the button head of the handle using the Allen key.
- Loosen the bolt of the top cheese plate using the 3mm Allen key, so that the shoe mount can loosen up.
- After sliding the shoe mount of the plate, attach the bolt to the camera (Not Included) and properly fix it by tightening it using the 3mm Allen key.
- Match the threads of the camera (Not Included) to the bottom threads of the camera plate and then insert the screw. Properly tighten it using the screw driver.
- Place the top handle on the top plate, and then insert the button head. Properly secure it using the Allen key.
NOTE: It has a sophisticated & High-Grade CNC aluminum body to ensure long-lasting durability & stability. This top-notch cage is easy to use & comfortable to carry. - Loosen the knob of the top handle and then insert the rod by matching it with the hole.
- After inserting the rod, secure the top handle by re-tightening its knob.
NOTE: It mounts directly to tripods with a 1/4ʺ-20 or 3/8″ -16 threaded mount and has multiple universal connections for mounting additional accessories. Built-in cold shoe mount on the top and multiple 1/4”-20 & 3/8”-16 thread holes let you attach mics, lights, articulating arms, and other devices and accessories.
FAQ
-
Q: What cameras are compatible with the SnapRig Universal DSLR Camera Cage Rig?
A: The SnapRig Universal DSLR Camera Cage Rig is compatible with DSLR cameras. -
Q: Can I mount additional accessories to the cage?
A: Yes, the cage has multiple universal connections, including a built-in cold shoe mount on the top and multiple 1/4-20 & 3/8-16 thread holes, allowing you to attach mics, lights, articulating arms, and other devices and accessories. -
Q: How do I adjust the height of the cage?
A: The cage comes with interchangeable side support rods of different heights. These rods connect to the cheese-style top plate and baseplate, allowing them to slide up and down for interior height adjustment.
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below:
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photo-
copying, recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
YOUR PROAIM SNAPRIG UNIVERSAL DSLR CAMERA CAGE RIG WITH TOP & SIDE HANDLES ALL
DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty
We offer one year warranty for our products from date of purchase. Within this
period of time, we will repair it without charge for labor or parts. Warranty
doesn’t cover transportation costs nor does it cover a product subjected to
misuse or accidental damage. Warranty repairs are subjected to inspection and
evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us : In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>