Lynxcel JTGA005 Port Gigabit Industrial Ethernet Switch Instruction Manual

Lynxcel JTGA005 Port Gigabit Industrial Ethernet Switch

Product Technical Specifications

Specifications:

• Product name: Gigabit 5 Port Industrial Ethernet Switch
• Product model: JTGA005
• RJ45 port: 5
• Port description: 1-Way Gigabit uplink port + 4-Way Gigabit downlink Port Industrial Ethernet Switch
• Network protocol: 10 / 100 / 1000Baset (x) automatic detection Full / half duplex MDI / mdi-x adaptive
• Work environment: IP40
• Power Supply: Passed certification: CE, FCC, ROHS, ISO9001:2015 Ministry of Public Security Test Report
• Switch properties: Meantimebetweenfailures 300,000 Hour Warranty
• LED indicators: Power indicator, Light port indicator, Port indicator (yellow), Port indicator (green)
• Degree of protection: IP40
• Authentication: Passed certification: CE, FCC, ROHS,ISO9001:2015 Ministry of Public Security Test Report

Product Overview:

The Gigabit 5 Port Industrial Ethernet Switch is a high-performance switch designed for industrial applications. It features a compact and durable metal enclosure with IP40 protection grade. The switch supports Gigabit Ethernet connections and offers 1-Way Gigabit uplink port and 4-Way Gigabit downlink ports. It is designed to provide reliable and efficient network connectivity in harsh industrial environments.

Product Characteristics:

• Enclosure: IP40 protection grade, metal enclosure
• Installation: DIN rail type, wall mounted
• Heat dissipation mode: natural cooling without fan
• Weight: 0.36kg
• Dimensions: 118 x 86 x 39mm (L x W x H)

Technical Parameters:

• EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A
• EMS: IEC(EN)61000-4-2(ESD), IEC(EN)61000-4-3(RS),IEC61000-4-6(CS), IEC(EN)61000-4-16(CM EMI), IEC60068-2-27(Shock),EC60068-2-32(Freefall), IEC 60068-2-6 (Vibration)

Product Size:

Dimensions: 118 x 86 x 39mm (L x W x H)

Indicator Description:

• Power indicator (PWR): Always on
• Light port indicator (Lk/act): Constant extinction
• Port indicator (yellow): Always on
• Port indicator (green): Constant extinction

Installation Description:

The industrial ethernet switch adopts DIN card rail installation. Follow these steps for installation:

1. Incline the equipment upward, and use the snap ring at the upper end of the equipment buckle outside the DIN rail.
2. Press the device down and use the lower port of the clip to fit into the DIN rail.
3. Check whether it is stable after fastening.

Power Input:

The industrial ethernet switches are dual power backup. When both power supplies are connected, only one power supply is working. When this power supply fails, it will automatically switch to another power supply. The wiring meaning of redundant protection power supply is shown in the figure.

• Terminal 1: P1+ (Hook up the red wire)
• Terminal 2: P1- (Hook up the black wire)
• Terminal 3: FG (For future extensions)
• Terminal 4: FG (For future extensions)
• Terminal 5: P2+ (Hook up the red wire)
• Terminal 6: P2- (Hook up the black wire)
• Positive pole of the first power supply
• Negative pole of the first power supply
• Positive pole of the second power supply
• Negative pole of the second power supply

Application Topology:

[Insert application topology image]

Precautions:

1. Ensure proper grounding during installation.
2. Avoid exposing the switch to extreme temperatures or moisture.
3. Do not attempt to disassemble or modify the switch.
4. Read the user manual carefully before operating the switch.

FAQ:

Q: What certifications does the Gigabit 5 Port Industrial Ethernet Switch have?
A: The switch has passed certification for CE, FCC, ROHS, and ISO9001:2015. It also has the Ministry of Public Security Test Report.

Q: What is the warranty period for the switch?
A: The switch comes with a 3-year warranty.

5 Port Gigabit Industrial Ethernet Switch

Product Overview

5 Port Gigabit Unmanaged Industrial Ethernet Switch, 1 Gigabit uplink port + 4 Gigabit downlink ports, supporting 1×10 / 100 / 1000Base TX uplink port and 4 × 10 / 100 / 1000Base TX downlink ports. The products comply with FCC, CE and ROHS standards. JTGA005 has a working temperature of – 40℃ ~ 85℃, has super firmness, can adapt to various harsh environments, and can also be conveniently placed in a compact control box. The installation characteristics of guide rail, wide temperature operation, IP40 protection grade shell and LED indicator light make JTGA005 a plug and play industrial equipment, provide reliable and convenient solutions for users’ Ethernet equipment networking, and can be widely used in industrial scenarios of Ethernet access such as smart city, smart transportation, smart pipe gallery and smart industry.

Product Characteristics

• Ensure reliable data transmission and long service life.
• It supports full duplex or half duplex mode with automatic negotiation capability.
• The network interface supports full-automatic intersection recognition.
• The built-in store and forward mechanism supports a variety of protocols.
• Green energy saving, using low-power CPU.
• Working power supply: DC 12V-52V provides reverse connection protection and 4A overcurrent protection.
• Lightning surge protection (power supply): 5000A (surge waveform is 8 / 20 μ).
• It meets the industrial operation standard, and the mean time between failures is more than 300000 Hours.

Technical Parameters

Industrial

Ethernet Switch

Product model| JTGA005
RJ45 port| 10 / 100 / 1000Baset (x) automatic detection，
Full / half duplex MDI / mdi-x adaptive
Port description| 5 RJ45 Ports

Network protocol

| IEEE802.3 – CSMA/CD；
IEEE802.3i – 10Base-T；
IEEE802.3u – 100Base-TX/FX；
IEEE802.3x – flow control；
IEEE802.3z – 1000Base-X；
IEEE802.3ab – 1000Base-T；
work environment| Operating temperature: – 40℃ ~ 85℃ (- 40 ~ 185 ° f)
Storage temperature: – 40℃~ 85℃ (- 40 ~ 185 ° f)
Relative humidity: 5% ~ 95% (no condensation

Power Supply

| Input voltage: DC12V-52V (dual power supply redundant backup)
Access terminal: Phoenix terminal
Support dual power redundancy
Support built-in overcurrent 4.0A protection
Support reverse grounding protection

Switch properties

| Switching capacity: 10Gbps     Application level: layer 2
Overall packet forwarding rate:1.488Mbps
Mac table: 2K
Package buffer: 2MB
Delay time: < 3 μ s
Switching mode: store forward power consumption: < 3W
LED indicators| Power indicator: PWR interface indicator: electric port and optical

port (Link /Act)

Degree of protection| IP40
Authentication| Passed certification: CE, FCC, ROHS, ISO9001:2015     Ministry of Public Security Test Report
Meantimebetweenfailures| 300,000 Hour
---|---
Warranty| 3 Year

Mechanical properties

| Enclosure: IP40 protection grade, metal enclosure
Installation: DIN rail type, wall mounted
Heat dissipation mode: natural cooling without fan
Weight: 0.36kg
Dimensions: 118 x 86 x 39mm (L x W x H)

Industry standard

| EMI

FCC Part 15 Subpart B Class A ， EN 55022 Class A EMS

IEC(EN)61000-4-2(ESD):             ±8kV(contact),             ±15kV(air) IEC(EN)61000-4-3(RS):10V/m(80~1000MHz)

IEC(EN)61000-4-4(EFT):Power  Port:±4kV;

Data Port: ±2kV

IEC(EN)61000-4-5(Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV

IEC61000-4-6(CS):10V(150kHz～ 80MHz)/IEC(EN)61000-4-16(CM EMI) :    30V cont. 300V,1s

IEC60068-2-27(Shock)/EC60068-2-32(Freefall)

IEC 60068-2-6 (Vibration)

Product Size

• Dimensions: 118 x 86 x 39mm (L x W x H)

Indicator Description

Description of Indicator Status| Description of Indicator Status| Description of Indicator Status

Power indicator：PWR

| Always on| Normal
Constant extinction| Not powered on

Light port indicator Lk/ act

| Always on| The optical port connection is normal
Constant extinction| Optical port not connected

Port indicator (yellow)

| Always on| The electric port is normal
Twinkle| The electric port has data transmission
Constant extinction| The electric port is not connected

Port indicator (green)

| Always on| PoE power on
Constant extinction| PoE power down

Product List

Installation Description

The industrial ethernet switch adopts DIN card rail installation.

1. Incline the equipment upward, and use the snap ring at the upper end of the equipment buckle outside the DIN rail.
2. Press the device down and use the lower port of the clip to fit into the DIN rail.
3. Check whether it is stable after fastening.

Power Input

Industrial ethernet switches are dual power backup. When both power supplies are connected, only one power supply is working. When this power supply fails, it will automatically switch to another power supply. The wiring meaning of redundant protection power supply is shown in the figure.

supply
Terminal 3| FG|  | For future extensions
Terminal 4| FG|  | For future extensions
Terminal 5| P2+| Hook up the red wire| Positive pole of the second power supply
Terminal 6| P2-| Hook up the black wire| Negative pole of the second power supply

Note: please connect the positive and negative poles of the power supply according to the identification at the Phoenix terminal, and input the voltage according to the voltage range (generally DC12V ~ 52V),Subject to the description of the side cover), only one power supply can work normally.
The power supply shall be in accordance with the schematic diagram (only schematic diagram, excluding all power panels, and the positive and negative poles of the power panel shall prevail during wiring).

Application Topology

Precautions

To avoid equipment damage and personal injury caused by improper use, please follow the following precautions.

1. Keep the power off during installation to ensure that the anti-static wrist is in good contact with the skin and avoid potential hidden dangers.
2. The switch can work normally only under the correct power supply. Please confirm that the power supply voltage is consistent with the voltage marked by the switch.
3. Before the switch is powered on, please make sure that the power circuit will not be overloaded, so as not to affect the normal operation of the switch or even cause unnecessary damage.
4. In order to avoid the risk of electric shock, do not open the shell when the switch is working, and do not open it by yourself even when it is not charged.
5. Before cleaning the switch, pull out the power plug of the switch. Do not wipe it with wet fabric or clean it with liquid.
6. The equipment installed in the rack is generally from bottom to top to avoid overload installation.
7. Avoid placing other heavy objects on the surface of the switch to avoid accidents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>