Dotlux 3026-160120 WORKER Battery Powered Construction Spotlight User Manual

June 14, 2024
DOTLUX

WORKER
3026-160120

User manual
shop.dotlux.de –> item-no –> Downloads Dotlux
3026-160120 WORKER Battery Powered Construction Spotlight -
icon

Product data

Dotlux 3026-160120 WORKER Battery Powered Construction Spotlight - icon
1

Scope of delivery

– WORKER
– User manual
– 1m car charger cable, 2m power cable Dotlux 3026-160120 WORKER Battery
Powered Construction Spotlight - icon 2This product contains a light source of energy efficiency class E.
Intended use
Portable luminaire for indoor and roofed outdoor use.
Conformity
DOTLUX GmbH hereby declares that this product complies with the EU Directives EMC 2014/30/EU, LVD 2014/35/EU, RoHS 2011/65/EU and the Ecodesign Directive 2009/125/EC.

Accessories

Dotlux 3026-160120 WORKER Battery Powered Construction Spotlight -
AccessoriesDotlux 3026-160120 WORKER Battery
Powered Construction Spotlight - Accessories 1 Operating instructions
This product contains a lithium-ion battery.
Charging time 3.8 h
30 % brightness – 6,75 h (both surfaces)……………. 1 x
100 % brightness – 2 h (both surfaces)………………….. 2 x
50 % brightness – 4 h (one surface)……………. 3 x ****

Before Using / Notice of Liability

Dear customer, please unpack the products carefully and check that the delivery is complete and that the units are undamaged. Do not operate lamps with a damaged electrical part, cable or glass. In cases of damaged components, you should contact the mentioned service address (point 9) immediately. Please read these instructions carefully. Thereby mistakes are avoided that could lead to hazards or malfunction. Keep the instructions and the installation manual in a safe place for future reference. The manual
must be passed on to all subsequent owners or users of the product. Ensure that any supplements you may receive have also been appended to the manual. The manufacturer cannot accept any responsibility and/or liability for bodily injury or property damage due to:
– improper installaon
– unauthorized modification of the product
– improper use
– non-compliance with these instructions
Declaration of Conformity
The full text of the EU declaration of conformity is available at the following Internet address: https://www.dotlux.de/konformitaetserklaerungen/
Other Symbols
Always follow the symbols on the packaging and in the instructions. The characters and symbols are explained below:
This manual assumes knowledge which corresponds to a complete training as an electrician.
Attention! Basic safety precautions should always be followed.

The light source is not replaceable. The entire luminaire must be repla ced.
The LED light source is replaceable by the end user.
The LED light source is replaceable by a qualified person.
The ballast is not replaceable.
The ballast is replaceable by the end user.
The ballast unit can be replaced by a qualified person.

Intended Use / Foreseeable Misuse

This product is for lighting. Please see the assembly drawing for further information concerning intended use. Do not expose to strong mechanical stress or heavy contamination.
For safety reasons, do not modify and/or convert the product as any other use may damage the product. This could lead to hazards such as short circuit, electrical shock or fire.

Maintenance/ Care

Turn off the power and allow lamp  to cool down before cleaning, maintaining or replacing the lamp!
Check that there is no voltage. Use a dry or moist cloth for regular cleaning (2 or 3 times per year). Chemicals or abrasives must never be used. A special stainless steel cleaning agent is recommended for cleaning stainless steel luminaires. The following environmental influences can have undesirable effects on the surface of the product: acid rain and soil, high salt content in the air, cleaning agents, fertiliser (especially in flower beds), de-icing salt, other chemical substances (e.g. pesticides). Only the lamps stated on the packaging may be used.

Safety Precautions

Please observe the national installation and safety regulations during installation, operation and maintenance.
** Do not install the lamp when voltage is applied the the lamp. Caution: Danger to life!
Electrical connections may only be  carried out by a qualified electrician. Damaged electronic parts my only be replaced by a qualified electrician.
**
This product and its packaging contain small parts that can be swallowed by children. For this reason, the product and its packaging must always be kept out of reach of children.
Replace any broken protective  glass immediately. Always ensure  that only original parts are being used.
Minimum distance to illuminated X m objects

Disposal Instructions

After the implementation of European Directive 2012/19/EU and 2006/66/EG in the national legal system, the following applies: Electric and electronic devices as well as batteries must not be disposed of with household waste.
Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public ccollectingpoints set up for this purpose of point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that are product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/ batteries, you are making an important contribution to protecting our environment.

Service Address
DOTLUX GmbH
Richard-Stuecklen Str. 7, 91781 Weissenburg
Tel: +49 9141 / 4051 0
Fax: +49 9141 / 4051 999
info@dotlux.de
www.dotlux.de

Symbols IP protection / Protection class

****| Protection class I| The product has a connection for a protective earth conductor. Connect the protective earth conductor (green-yellow wire) to the corresponding marked earth screw.
---|---|---
| Protection class Il| The product has special insulation and must not be connected to a protective earth conductor.
| Protection class Ill| The product may only be connected to safety extra-low voltage.
| IP20| Protection against: Solid objects with ø ≥12.5 mm, contact with fingers or similar objects. No protection against liquid ingress!
| IP40| Protection against: Solid objects with ø ≥ 1.0 mm, contact with wires, tools or similar objects with ø ≥ 1.0 mm. No protection against liquid ingress!
| IP44| Protection against: Solid objects with ø ≥ 1.0 mm, contact with wires, tools or similar objects with ø ≥ 1.0 mm. Splashed water from all directions (360°)
| IP54| Protection against: Dust deposition (of a harmful amount), all contact from solid objects. Splashed water from all directions (360°),
| IP65| Protection against: Dust ingress (dust-tight), all contact from solid objects. Water ingress caused by a nozzle (low pressure water jets) from all directions (360°).
| IP66| Protection against: Dust ingress (dust-tight), all contact from solid objects, powerful water jets
| IP67| Protection against: Dust ingress (dust-tight), all contact from solid objects, temporary immersion in water under defined conditions of pressure and time.
| IP69| Protection against: Dust ingress (dust-tight), protection against water in case of high pressure/ steam jet cleaning, especially agriculture, complete protection against contact.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals