Vonyx 170.368 VSA BT Series Active PA Speaker Instruction Manual

: June 14, 2024
: VONYX

Table of Contents

Vonyx 170.368 VSA BT Series Active PA Speaker
Safety Instructions
UNPACKING INSTRUCTION
POWER SUPPLY
REAR PANEL
MEDIAPLAYER
CONNECTING WITH BT
REPLACING THE FUSE
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Vonyx 170.368 VSA BT Series Active PA Speaker

Safety Instructions

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features. Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the product, please ask for advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The product contains voltage-carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
The product is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the product from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the product with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet, and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
To avoid fire and shock hazards, do not expose the product to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the product to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is to unplug it from the mains when not in use.
If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.
Do not repeatedly switch the product on and off. This shortens the lifetime.
Keep the product out of the reach of children. Do not leave the product unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
If this product is with a speaker inside it can cause a magnetic field. Keep the product at least 60cm away from the computer or TV.
If this product has a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the product for a long period of time. Otherwise, the battery may be permanently damaged.
If the battery is damaged please replace it with the same specifications battery. And dispose the damaged battery environment friendly.
If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise, serious damage and/or dangerous radiation may occur.
Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
Make sure that the main lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if the power outlet matches. If you travel, make sure that the main voltage of the country is suitable for this product.
Keep the original packing material so that you can transport the product in safe conditions.
- This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
- This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The rising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

POWER SUPPLY

The label on the back/underside of the product indicates the mains voltage to which it must be connected. Check that the mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate electrical ground to avoid the risk of electrocution or fire.

REAR PANEL

MICROPHONE/LINE VOLUME LEVEL
Controls the microphone/line input volume
MP3 VOLUME LEVEL
Controls the MP3 input volume
TREBLE
Adjust the high frequencies of the corresponding channel
BASS
Adjust the low frequencies of the corresponding channel
LINE/MICROPHONE SWITCH
Press to switch between line- and microphone input
XLR LINE/MICROPHONE INPUT
XLR connector for line/microphone signal input
XLR MIX OUTPUT
XLR connector for mix signal output
AC IN AND FUSE HOLDER
Socket for plugging in the supplied power cord. For instructions on how to change the fuse, see “REPLACING THE FUSE”
POWER SWITCH
Turn the device ON or OFF

MEDIAPLAYER

USB SLOT
You can play media files from a USB device by connecting the device to this slot
DISPLAY
The display shows multiple forms of information, for example, current MODE, elapsed time, etc
MODE BUTTON
Press to change modes between playing USB, MP3 and BT
PLAY/PAUSE BUTTON
Press this button to start or pause the play
FOLDER BUTTON
Press this button to enter the FOLDER selection
PREVIOUS BUTTON
Press this button to go to the previous track. Press and hold to scan backward within tracks
NEXT BUTTON
- Press this button to go to the next track
- Press and hold to scan forwards within tracks

CONNECTING WITH BT

Activate the BT function on your device (Mobile phone, tablet, etc.) from which you want to play the music. See the operating instructions for that device.
Press the “BT” button and activate the function.
Select “VONYX” on your BT device and make the BT connection

If a password is required, you can enter “0000”.

Attention: The BT distance is approx. 10 meters without any barrier.

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug the main lead.

Procedure:

Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3 : Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.

TECHNICAL SPECIFICATION

| VSA08BT| VSA10BT
---|---|---
Ref. nr.| 170.368| 170.370
Input connections| 6.3mm jack, USB, XLR (3-pin)
Output connections| XLR (3-pin)
Speaker type| Amplified
Amplifier type| Class AB
Output power max| 250W| 500W
Output power| 120W| 250W
Frequency response| 80Hz – 18KHz| 60Hz – 18KHz
Diameter tweeter| 1”
Tweeter type| High Compression Driver
Diameter woofer| 8”| 10”
Magnet type| Ferrite
Impedance| 4Ohm
SPL @ 1W/1m| 92dB| 96dB
SPL max| 115dB| 118dB
Power supply| 220-240VAC 50Hz
Dimensions (L x W x H)| 250 x 235 x 385mm| 310 x 265 x 480mm
Weight (kg)| 6,65| 8,85

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice. The products referred to in this manual conform to the European Community Directives to which they are subject:

European Union
Tronios B.V., Bedrijvenpark Twente Noord 18, 7602KR Almelo, The Netherlands