schenley Wet Dry Vacuum Cleaner User Manual

Be Simple, Be Graceful.
Schenley Wet Dry
Vacuum Cleaner

User Manual

Introduction

Dear Customer,
Thank you for choosing the Schenley Wet Dry Vacuum Cleaner. At Schenley, we strive to bring the best home cleaning experience through our products and services. The Schenley wet dry vacuum cleaner is a remarkable solution for deep floor cleaning. With our powerful brush motor and high-power suction fan, the product can easily pick up wet and dry messes like water, milk, ketchup, jams, dirt, sand, debris, pet hair, etc. The cleaner is capable of cleaning all sealed hard floors like hardwood, tile, laminate, vinyl, marble, linoleum, etc. With the clean water tank constantly rinsing the roller brush and the dirty water tank collecting the messes, the Schenley wet dry vacuum cleaner wipes the floor 100 times better than regular mops and relief you from the hassle to clean the mop pads constantly.
This user manual aims to provide you with guidelines on how to operate your Schenley Wet Dry Vacuum Cleaner and important safety instructions. Any use that does not conform to the guidelines described in this manual may void the limited warranty. Please read the complete instructions carefully before using the appliance and retain it for future reference. Once again thank you for being a valued Schenley customer.
Sincerely,
Your Schenley Team
THANK YOU!
Congratulations on your purchase and welcome to the Schenley family.
If you follow the operating and care instructions in this manual, your Schenley wet dry vacuum cleaner will provideyou with a long-time reliable service.

Safety Warnings

Please read all instructions and safety warnings carefully before using your Schenley wet dry vacuum cleaner. If you give this product to others, please remember to give them these instructions as well. This appliance contains batteries that are only replaceable by skilled persons.
Polarized Plug: As a safety feature, this cleaner uses a polarized plug, meaning one blade is wider than the other. This plug will fit into a polarized outlet only one way. If the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
WARNING:
To reduce the risk of danger to children and people with restricted capabilities:

• Do not allow children to use this vacuum cleaner.
• Do not allow children to play with this device or any of its accessories.
• Keep all packaging material out of reach of children to avoid the danger of suffocation.
• This device may be used by persons with reduced physical, sensory or mental capacities, provided they are supervised or have been trained in the safe use of the appliance and understand the potential danger.

WARNING:
To reduce the risk of fire, electric shock, or injury:

• Only use the adapter/plug that came with the product or adapters specified by Schenley.
• Do not use other adapters to charge the product.
• Do not use the adapter to charge other products.
• Ensure the power supply voltage is within the required range specified in the technical specification. Use an AC power supply with rated voltage, do not use a DC power supply.
• If the adapter/plug is damaged or has exposed components, do not use it to avoid the danger of electric shock.
• Do not pour water on the adapter/plug or immerse it in water as this could result in electric shock.
• Do not pour water on the charging base or immerse it in water as this could damage the charging base or result in electric shock.
• Do not pull or carry by the cord or pull the cord around sharp edges or corners.
• Remove the adapter/plug from the power socket before cleaning and maintaining the adapter or the charging base to avoid electric shock and injury.
• When there is abnormal deformation of the product body, burning smell, or sound while the product is charging or in operation, please immediately cut off the power and unplug the adapter/plug.
• When disposing of the device, safely cut the main cable to ensure that it can no longer be used. The battery must be removed from the appliance before it is scrapped to avoid explosion or fire.
• Do not use it with a damaged cord or plug. If the device is not working as it should or has been dropped, damaged, left outdoors, or dropped into water, do not attempt to repair it by yourself. Please contact our customer service: schenleycare@schenleytech.com. Incorrect reassembly or repair may cause a risk of electrical shock or injury.

WARNING:
To reduce the risk of injury and product damage:

• Keep fingers, hair, loose clothing, or any part of the body away from the opening and moving parts of the appliance and its accessories.
• Always place the cleaner in an upright position. Do not flip it upside-down or lay it flat as the water may enter the motor causing motor damage.
• Do not operate the device without filters in place as it may damage the motor.
• Only use the supplied accessories for the product. Do not add other cleaning agents to the clean water tank as it may damage the water path causing a clog or material deterioration.
• Do not use the device when the HEPA filter is wet, as it may reduce the suction performance of the device. Ensure the filter is dry before installing it.
• Do not use the product to pick up flammable or combustible liquids, such as petroleum, or ethanol, or use the device in areas where they may be present.
• Do not pick up toxic material such as chlorine bleach, ammonia, drain cleaner, etc. Do not pick up hard or sharp objects such as glass, nails, screws, etc.
• Do not pick up any burning or smoking objects, for example, unextinguished heat sources, ashes, burning cigarette butts or matches, etc.
• Please check the waste inlet and the dirty water hose regularly. If there is a blockage, please remove it in time to avoid a reduction in vacuum power.
• After using the appliance, please clean the dirty water tank in time and keep the air passage clear of wastes to avoid odor or contamination.
• D o not use an appliance that is dama ged or mo dified. Damaged or modified electrical components and batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not expose the appliance to extreme sunlight, frost, rain, or snow.
• Store the appliance in a cool, dry location. Do not store the appliance in the vicinity of gas or electric cookers, heaters, or ovens.
• Do not expose the appliance to fire or excessive temperature. Exposure to fire or temperature above 130 °F may cause an explosion.
• If the appliance is not intended to use for an extended period, please turn off the power and unplug the power adapter.
• This product is suitable for hard floor in indoor environment, including waxed floor, stone floor, rubber floor, marble floor, granite floor, terrazzo floor, solid wood floor, composite floor, bamboo floor and various mirror tiles, porcelain tiles, and other flat surfaces. For optimal performance, please use the product on even ground surfaces.

Features and Attachments

1. KEY PARTS AND COMPONENTS
   Note:
   The roller brush and the HEPA fi lter are preinstalled onto the product . The images in this user manual are for illustrative purposes only. The actual product may differ. We recommend replacing your roller brush and HEPA filer every 2-3 months to avoid odor or contamination. You may purchase replacement parts and other accessories through Schenley.

2. SCHENLEY WET DRY VACUUM CLEANER

3. CHARGING BASE

4. DISPLAY SCREEN

Assemble Your Wet Dry Vacuum Cleaner

1. Installation of the Handle Assembly: ASSEMBLE
   The handle assembly consists of a handle and an aluminum rod. Align the end of the rod to the top surface of the cleaner main body where there is a circular hole. Grab the rod firmly and insert the rod into the circular hole. After hearing a click sound, the handle assembly is installed in place. Ensure that the handle is tightly clicked in.
   DISASSEMBLE
   To disassemble the handle assembly, use a flat-head screw driver to reach into the hole on the back of the cleaner main body. Press down into the hole firmly and at the same time pull the rod upward to release the handle assembly from the cleaner main body.

2. Mounting of the Accessories:
   Install the accessory holders into the charging base as indicated. Connect the charging cord to the charging port and plug in the adapter to the power supply.

Operate Your Wet Dry Vacuum Cleaner

1. Charge Your Wet Dry Vacuum Cleaner:
   Place the charging base on a flat surface. After connecting the power cord to the power supply, align the back of the cleaner with the charging contact plate. Slowly place the cleaner on top of the charging contact plate. As the cleaner sits in place, the LED display and voice prompt will indicate the charging status. Ensure the cleaner is in full contact with the charging contact plate.
   WARNING:
   • If the appliance is not intended to be used for an extended period of time, please turn off the power and unplug the power adapter.
   • When the appliance is fully charged, it will automatically stop charging. If it is still charging after the normal charging time, please unplug the power adapter immediately and contact Schonely customer service.
   • When disposing the device, safely cut the main cable to ensure that it can no longer be used. The battery must be removed from the appliance before it is scrapped to avoid explosion or fire.
   • Please dispose the battery safely and properly. Do not put it into fire, water or soil.

2. Fill the Clean Water Tank: 1. Press down the release button of the clean water tank and remove the tank from the cleaner main body.
   2. Open the water inlet lid by pulling it down. 3. Fill water through the water inlet. Close the water inlet lid after filling.
   4. Align the clean water tank with the cleaner main body, press down the release button and push inward. After hearing a “click” sound, the tank is installed successfully.
   NOTE: Only add water or Schonely specified cleaning agent to the clean water tank.

3. Clean the Dirty Water Tank: 1. Press down the release button of the dirty water tank and remove the tank from the cleaner main body.
   2. Pull to open the top cover of the dirty water tank. Do not allow dirty water to contact the HEPA filter.3. Pour out the dirty water and rinse the tank with clean water.
   4. Align the dirty water tank with the cleaner main body, press down the release button, and push inward. After hearing a “click” sound, the tank is installed successfully.
   NOTE: If dirty water contacts with the HEPA filter, use clean water to rinse the filter and leave it dry before using it again. The use of a wet filter may reduce the vacuum performance of the appliance. It is recommended to replace the HEPA filter every 2-3 months.

4. Start Cleaning
   Press the On/Off button to power on the cleaner and start cleaning. Press the On/Off button again to shut it off.
   Press the mode switch button to change between the three cleaning modes.

| Smart Mode
---|---
| Suction-Only Mode
| Sanitization Mode

1. Smart Mode: The cleaner will detect the cleanliness of the floor and adjust its suction power accordingly. The cleanliness indication ring will display floor cleanliness accordingly.
2. Suction-Only Mode: The cleaner will only provide suction power and not disperse water. Use this mode when there is an excessive amount of liquid on the floor. The cleanliness indication ring will display floor cleanliness accordingly.
3. Sanitization Mode: The cleaner will generate electrolytic water in the clean water tank to be used for cleaning. Other functions of the cleaner remain the same as the smart mode.
Press the water spray button to spray water to the front of the cleaner. This will allow water to be dispensed precisely to the desired cleaning area. Standby Mode: The cleaner has a safety protection mechanism. When the cleaner main body is tilted to the upright position, the cleaner will automatically enter standby mode. To start the appliance again, simply tilt the cleaner main body backward to more than 90°, and the appliance will resume working.
WARNING:
• Do not use the cleaner to clean foam as it may clog the tube and damage the motor.
• Do not tilt the machine more than 140° to avoid water leakage.
• To prevent dirty water from flowing out, do not lay the machine flat or shake the body violently, so as not to damage the internal components by liquid backflow.

Clean & Maintenance

1. Self-Cleaning Function:
   After using Schenley wet dry vacuum cleaner, place the appliance back on the charging base. Ensure that the clean water tank has sufficient water. Press the selfcleaning button on the right side of the cleaner body to initiate self-cleaning. The self-cleaning indicator on the LED display screen will illuminate once self-cleaning starts. After cleaning the roller brush, the air-dry system on the charging base will automatically turn on. Cool air will come out from the air outlet to dry the roller brush. The air dry function will automatically shut off after 3 hours. Press the selfcleaning button again to end the air dry function.
   WARNING:
   • Do not pour water on the charging base or immerse it in water as this could damage the charging base or result in electric shock.
   • After using the appliance, please clean the dirty water tank in time and keep the air passage clear of wastes to avoid odor or contaminations.
   • Regular cleaning and maintenance of the cleaner, the roller brush, the vacuum hose is required.

2. Clean your Wet Dry Vacuum Cleaner
   Please shut down the cleaner before cleaning your device. 1. Press down the release button of the dirty water tankan remove the tank from the cleaner main body.
   2. Gently wipe the detection sensor on both sides of the cleaner with a rag or wet paper towel. 3. After removing the dirty water tank, pull to open the top cover and pour out the dirty water. Take out the HEPA filter and separate it from the tank top cover.
   4. Rinse the top cover and the HEPA filter with clean water. Wait until the HEPA filter is completely dry before placing it back on the top cover. 5. Use the complimentary cleaning brush to reach down into the vacuum hose to clear any residual wastes.
   6. Use a rag or wet paper towel to clean the detection sensor window on both sides of the top cover and install it back to the cleaner main body.
   WARNING:
   • Ensure the HEPA filter is installed before using the cleaner. Failures to do so may result in motor damage.
   • Ensure the HEPA filter completely dry before installing it to the cleaner.
   • Failures to do so may result in reduced suction performance.
   • Clean the detection sensor regularly to avoid reduced performance of the cleaner.

3. Clean Roller Brush & Cover Plate 1. Press and hold the cover plate release button with two fingers at the same time and then pull it up to remove the cover plate.’
   2. Rinse the cover plate with water and wipe it with a cloth or paper towel and then install it back to its original position. 3. To remove the roller brush, first pull the roller brush pull ring outward at 90° and then pull the roller brush out completely.
   4. Clean the roller brush with clean water and install it back in its original position.

WARNING:

• Do not rinse the cleaner main body directly with water as it may damage the electrical components.
• After cleaning the roller brush cover plate with water, please wipe the residual water off completely.
• Ensure the roller brush is installed firmly in place before starting the cleaner. Failure to do so may result in product damage and human injury.
• We recommend replacing your roller brush and HEPA filer every 2-3 months to avoid odor or contamination. You may purchase replacement parts and other accessories through Schonely.

Technical Specifications

Troubleshooting

The cleaner is in the upright position.
The roller brush has not been installed in place or the roller brush is stuck.
The dirty water tank is not installed properly.
The dirty water tank is full.| Charge the cleaner by placing it on the charging base.
Tilt the cleaner main body to activate it.
Install the roller brush properly.
Install the dirty water tank properly.
Empty the dirty water tank.
No suction or weak suction power| ****

The suction inlet or the vacuum hose is clogged.
The roller brush is entangled with objects such as hair
The roller brush or the dirty water tank is not installed properly.
The filter is wet or clogged.

| ****

Remove any clogging in the vacuum hose.
Clean the roller brush.
Reinstalled the roller brush and the dirty water tank.
Clean the filter and let it dry before installing it to the cleaner.

The vacuum fan is making a strange noise| The service time is too long, and the temperature is too high.
Too much dirty water in the dirty water tank.
The main suction opening is blocked.
The filter is wet or clogged.| Let the cleaner cool down for 15 minutes before using it again.
Empty the dirty water tank.
Clear any blockage in the main suction opening.
Clean the filter and let it dry before installing it to the cleaner.
Issue Scenarios| Possible Reasons| Solutions
---|---|---
The Selfcleaning function does not work| The roller brush may be stuck.
The cleaner is not charging.
The battery is less than 20%, and cannot start Selfcleaning.
The dirty water tank is not installed properly or is full.
The clean water tank is not installed properly.| Open the roller brush cover and clear the stuck.
Ensure the cleaner is placed properly on the charging base.
Charge the cleaner and restart self-cleaning.
Install the dirty water tank properly. Ensure it is not full.
Install the clean water tank properly.
The brush does not turn| The roller brush is entangled with objects such as hair.
The roller brush is not installed properly.| Clean the roller brush.
Reinstalled the roller brush.
The cleaner does not charge| The power adapter is not plugged in properly.
The cleaner is not connected to the charging
base correctly.| Ensure the power adapter is inserted fully on both ends.
Make sure the cleaner is in place.
Water leaking from the top of the dirty water tank| Abrupt handling or tilting the cleaner for more than
140 degrees is causing water leakage.| Do not flip it upside-down or lay it flat as the water may enter thermistor causing motor damage.
No water comes out of the cleaner| The clean water tank is empty or it is not installed
properly.| Fill the clean water tank and installed it properly.

Warranty and Customer Service

Schenley warrants to the original retail purchaser that Schenley’s wet dry vacuum cleaner will be free from defects in material and workmanship for one year from the date of the original purchase. This warranty applies to products used for personal purposes, and not for commercial or rental purposes.
To receive warranty service, the original customer purchaser should contact Schenley customer service for immediate assistance. Proof of purchase in the form of a bill of sale or receipt invoice, indicating that the wet dry vacuum cleaner is within the warranty period, must be presented to obtain the requested services. Under applicable law, Schenley may request you to provide additional documents before receiving warranty service. Please contact Schenley customer service for more details: schenleycare@schenleytech.com.
Please be aware the shipping expenses to return the product to the Schenley servicing address are not covered by this warranty and must be paid by the customer.
EXCEPTIONS AND EXCLUSIONS
If a hardware defect arises and a valid claim is received within the warranty period, Schenley, at its sole option and to the extent permitted by law, will either a) repair the defect at no charge, using new or refurbished replacement parts, b) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original device, or c) refund the purchase price of the product.
A replacement product or part thereof shall enjoy the warranty of the original product for the remainder of the warranty period, or 90 days from the date of replacement or repair, whichever provides you longer protection. Refunds can only be given if the original product is returned.
This warranty does not apply to:

1. Any non-Schenley wet dry vacuum cleaner product or accessories even if packaged or sold with the product;
2. Damage caused by use with non-Schenley wet dry vacuum cleaner products or accessories;
3. Damage caused by accident, abuse, misuse, flood, fire, earthquake, or other external causes;
4. Damage caused by operating the product outside permitted or intended uses;
5. Damage caused by modifying the product or parts;
6. Consumable parts, such as batteries, fuses, and lights;
7. Cosmetic damage.

This warranty is only valid in the country where it is purchased and only applies to products purchased in that country.
If your product should require service:
You may contact us at schenleycare@schenleytech.com or visit our website www.schenleytech.com to have a customer care specialist assist you.
If you like our products, please subscribe to our channels:
Twitter: @SchenleyTech
Instagram: @SchenleyTech
Facebook: www.facebook.com/SchenleyTech
Youtube: www.youtube.com/c/Schenley

References

• Schenley Official Website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>