N OVEEN IKN870 Electronic Mosquito Bat User Manual
- June 14, 2024
- N OVEEN
Table of Contents
N OVEEN IKN870 Electronic Mosquito Bat User Manual
PLEASE READ CAREFULLY AND SAVE THESE INSTRUCTIONS
Thank you for choosing our product. Read carefully before submitting, installing, switching on or maintaining this device. Protect yourself and others by following the safety instructions. The Electronic Insect Killer utilizes the black light (ultra-violet rays) of the wave length, which is proven to be the most effective lure for light sensitive flying insects, such as flies, moths, mosquitoes and other flying insects.
These insects are electrocuted by the electrically-charge metal grids. No chemicals, no smell, no sprays, no mess, pollution free and harmless to humans and pets. It is ideal for using in houses, factories, food outlets, restaurant, canteen, office, hospitals, etc.
Warnings and general information
- Suitable for indoor use.
- High voltage! Do not touch the inner electric grids
- Never put metal objects inside the grids while in operation.
- Keep away from flammables.
- Make sure that the voltage and frequency of the current are suitable for this device. Check the local voltage before operating.
- Use in a place where children cannot reach.
- Keep the appliance and its cord out of reach of children.
- Children cannot play with the device.
- The Insect Killer cannot be used in barns, stables and similar locations.
- The appliance is not to be used in locations where flammable vapor or explosive dust is likely to exist.
- The device can be placed or moved using the installed handle.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Unplug the appliance before cleaning. Clean the plastic enclosure/ grille with dry clothes empty the collection tray every week or when need.
- This device may be used by children from 8 years and above and persons with limited physical, sensory or mental abilities or lack of experience and knowledge if they have been supervised or instructed regarding the use of the device in a safe and understandable manner related hazards.
Cleaning and maintenance should not be carried out by children without supervision.
NOTE: The light source in this device are non-replaceable LEDs. Attempts to replace or disassemble the device may result in eye damage.
DEVICE DESCRIPTION
- Function switch
- High voltage switch
- High voltage indicator
- Function switch
- Type-C charging socket
- Charging indicator
CHARGING
- Charge the device for 4-6 hours before first use.
- For charging, use a type C charger (not included). When charging, the indicator glows red. The green indicator means charging is complete.
OPERATION
- Mosquito bat function
- Off
- Insect killer function
- High voltage on
Mosquito bat function
Set the function switch to the | position, press and hold the high-voltage
button. The indicator will light
on and the electric grid will have high voltage. Insects will get electrocuted
when they come into contact with the mesh. The high voltage indicator will
turn off after releasing the button, there is still a residual current on the
grid. Do not touch the grid, the electricity will disappear after a few
seconds. Set the function switch to the O position to turn off the device
Insect killer lamp function
Set the function switch to the position. The LED purple light and the high voltage indicator will light up. The electric grid will be under high voltage. Put the electric bat into the base. Insects attracted by the purple light will be electrocuted when they come into contact with the mesh. Set the function switch to the O position to turn off the device.
SET CONTAINS
- Electric mosquito bat
- Base
- USB cable
- User manual
TECHNICAL DATA
-
Power / Grid voltage: 4W / 1600V
Battery: 3.7V/900 mAh -
Charging time: 1 h
-
Insect killer working time: 3 h
-
Working area: 30 m2
IMPORTER / GWARANT:
COMTEL GROUP spółka z ograniczoną odpowiedzialnością sp.k.
PLAC KUPIECKI 2, 32-800 BRZESKO,
TEL: +48 14 68 49 418, FAX: +48 14 68 49 419.
www.comtelgroup.pl
e-mail: biuro@comtelgroup.pl ,
serwis@comtelgroup.pl