Weielt 120mm 4 Digit Sliding Lockable Instructions
- June 14, 2024
- Weielt
Table of Contents
Weielt 120mm 4 Digit Sliding Lockable
Installation Instructions
-
You need a metal rod to pry open the hole plug, The initial password is: “0-0-0-0-0”.
-
Toggle the switch to pull back, pull to point A, pull up, and finally pull to point B
-
Rotate the password wheel to set the password, make sure to turn it in place.
-
After setting the password, do not move the number, and move the lever back to the origin.
Please note!
- When setting your PIN, please ensure that the numbers are perfectly aligned with the card slot, otherwise the setting may not be valid.
- When the setting password is invalid, please check whether the hole plug is removed, and then pull up the rod and move it to the hole plug position. Then you can successfully set the password, and finally push the pole to the original position and scramble the password. At this time, the password latch lock cannot be opened under the wrong password.
Read User Manual Online (PDF format)
Loading......