Etetale CRETSH001AU Handheld High Pressure Shower Head User Manual

Etetale CRETSH001AU Handheld High Pressure Shower Head

Package Includes

• Shower head
  (With built-in filter)

• Bracket

• Hose

• Flow restrictor: 2.5GPM 1.75GPM

• Teflon tape

• Extra strainer mesh

• Filter cartridge replacement

• Extra washer

• User manual

1. Wide Fan to quickly rinse off soap residue

2. Shower Mode make sure that the knob points right in the center

3. Point Jet to blast away stubborn grime buildup

*Note: After using 1 3 function, please reset the knob to mode 2 , to prevent the water from rushing to the ceiling the next time you shower.

• Reduces water to a trickle, saving water while applying in bathe lotion .
  Note: After using PAU~E function, please reset the button to prevent the next use without water.

Breaking Drawing

Filter Handle Removal and Replacement Steps

1. Unscrew to the left

2. Removing the shower rod

3. Renewing filter cartridge

4. Tighten to right

About the filter replacement

The filter life depends on the frequency of use. Generally, the filter lasts for about 6 months, if it is used frequently, it is recommended to replace it in 4 months.

Easy Installation

Step 1:
Wrap 3-4 layers of Teflon tape around the shower arm threads.

Step 2:
Before installation, make sure that the bracket inlet has a strainer mesh, install the bracket to the shower arm, rotate and tighten it (Do not disassemble the bracket).

Step 3:
Connect hose A to the bracket and tighten them (Make sure hose A has a built- in black washer)

Step 4:
Connect hose B to the shower head and tighten them.
(There is an identification of the hose B “Connect shower head”, and make sure hose B has a built-in black washer)

Step 5:
Your shower head is ready, enjoy it. (If the hose Band the shower head are tightened, there is still a gap between the thread, do not worry, this is the normal state, and will not cause water leakage.)

Note: if you find a leak in the connection during use, please follow these steps:

1. Make sure there is a black washer at each connection otherwise it may cause leakage.
2. Wrap 3-4 layers of Teflon tape around the leaking connection threads and reinstall.

Customers Support

If you need to buy more filters in the future, please contact us by email: support@etetale-us.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>