Electrolux EFW71711 UltimateHome 700 Multi Function Vacuum Cleaner User Manual
- June 14, 2024
- Electrolux
Table of Contents
User Manual ULTIMATEHOME 700
EFW71711 / EFW71311
EFW71711 UltimateHome 700 Multi Function Vacuum Cleaner
USE ONLY:
Only for hard floor such as vinyl, tile, sealed wood, etc. NOT FOR CARPET/RUG
USE.
USE ONLY:
SINGAPORE / MALAYSIA/ MENCA| KSA-30C-260110HK
THAILAND/ INDONESIA| KSA-30C-260110HT
AUSTRALIA & NEW ZEALAND| KSA-30C-260110HA (EFW71711)
KSA-30C-260085HA (EFW71311)
KOREA| KSA-30C-260110HO
*Actual product may differ from illustration.
| 
---|---
|
www.electrolux.com *Availability of item varies
by region and country.
Troubleshooting
| Common issue | Possible reason | Solutions |
|---|
The floor washer is not working
| Water shortage in clean tank| Add clean water in the clean tank
The dirty tank is full| Empty the dirty tor
Brush roll is not installed| Install the brush rol or replace it
Low battery power| Fully charge the product
The brush roll is entangled with hair or other things| Clean the brush roll
Abnormal connection of electronic parts inside the handlebar| Return the
product to the service network for repair
The suction Is weakened| The drty tank has reached its designated capacity|
Take out the dirty tank, and empty the dirty water
The brush roll Brush rol cover, dirty tank are not instaled properly| Detached
and Install property.
Nozzle or nozzle air tube is blocked| Clean up the nozzle and nozzle air tube
The filter is dirty or blocked| Clean or into!l the filer before using
No water come out from the nozzle| No water in clean tank| Add water in clean
tank
The clean tor is not installed properly| Reinstol the clean tank
The clean tor* check valve is blocked| Replace the clean tank
Pump blockage| Return the product to the service network for repair
Waterway blocked| Return the product to the service network for check and
repair
The product coma be charged| The charging stand Is not plugged in properly|
Check that the plug is property connected
The machine is not fully plugged into the charging stand| Check that the
machine is positioned correctly
The adaptor is In poor. contact with the chorghg stand| Check that the adaptor
Is properly connected to charghg stand
The power level could not be automatically adjusted in AUTO mode| The bottom
tube is dirty and blocked| Use the cleaning brush to clean up the bottom tube
Dirty water tcrik false dam (The level of
dirty water Is much lower than max level)| Excessive cleaning solution is
added, resulting In a large mount of foam| Follow the Instructions for othing
the amount at clearing solution
The top cover of dirty wrier tank and solid-Raid separation holder are dirty|
Use dean water to clean the top cover of dirty water tank and soid-licruld
separation holder, and dry them wth paper towels or towels, or let them dry
for 24 hours before using
“Dirty Water Tank Full icon blink
| The dirty water took is full| Dump the dirty water before using
The dirty water tar not installed properly (EFW71711)| Reinstall the dirty
water tank
Self-cleaning is suspended or completed| The dirty water tank icon keeps
flashing for 1 min, press the on/off button to stop blinking and enter the
charging mode.
Icon brit for dean water tmk water shortage| Water shortage In dean water
tank| Add water in clean water tank before using
Nozzle ton Whirs| Brush rol Is entangled with an object such os hair or the
brush roll Is not instdled| Clean or install the brush roll
Power display (3 LED lights) flash three times before tuning off| The battery
is out of power under undervoltage protection| Put it back in the chorging
base and charge it
Power display (3 LED lights) flash four times before turning off| Discharge
overtemperature, the machine temperature is too high| Turn A off and let it
sit for a while
Press the self-cleaning button when the unit Is placed on the Barging stand,
but the set-clewing does not start, isle the self-cleaning Icon and power
display flash 5 times, then the unit returns to charging mode| Self-cleaning
is not allowed to start when the battery is less than 33%| Keep charging until
LED1 of power display is always on, then sei_clecring function MI be available
“TURBO” flashes on the display| Suction mode is activated by pressing ”+/-”11
button for one second. (Refer to the graphic on the center-right side of
Ul(dsplay) introduction page)| Press the “+/-” button agate to exit the
Suction mode.
www.fsc.org
RECYCLED
Paper made from
recycled material
FSC” C174895
A25502705