TCL S510W Sound Bar User Guide

TCL S510W Sound Bar

Register Your Product

Register your TCL Sound Bar to receive the latest news on product releases, promotional offers, and more!

What’s in the box

Make sure you read all the safety information before you use this product.
Warning: To avoid the danger of suffocation, keep plastic packaging away from pets, babies, and children. Do not use packaging bags in cribs, beds, carriages, or playpens. User Manual can be found at www.tcl.com/us on the specific product page in the “Download” section

Overview

1. AC input power connector
2. AUX VA input connector
3. AUX input connector
4. IR input connector
5. USB Type A connector
6. Optical input connector
7. HDMI ARC connector

Wireless subwoofer

The subwoofer will pair automatically with sound bar upon first use. In case of a problem, take the following steps to manually pair:

1.  Press and hold the pAIR button on the subwoofer for 3 seconds until an amber light begins flashing above the pair button.
2. Press and hold the 2 button on the sound bar until a yellow LED indicator flashes on the sound bar. After a short while, the sound bar LED will turn green and the subwoofer LED will turn solid.
3. The subwoofer is now connected to the sound bar.

Surround Sound Speakers

1. Connect each surround sound speaker into one of the surround ports on the back of the subwoofer

Install or replace the remote batteries

• Battery type: 1.5V AAA battery x 2

Use the Remote
4a Install or replace the remote batteries Warning: Do not expose batteries to excessive heat such as sunshine, fire, or the like. Keep new and used batteries away from children. For disposal or recycling information, please contact your local authorities.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type

Sound Bar LED Display

Place your Sound Bar and Subwoofer

The ideal place to position the Sound Bar is centered underneath your TV. exposed to pesos, na, are, a losine Note: Is remended to Sup the distance within 9.8 feet between the Surround Sound Speakers and the sound bar.

Wall mount your Sound Bar Required tools:

Required tools

1. Place the included wall mount template on the wall. Make sure the wall mount template is at least 2 inches below the center of the TV.
2. Use a level to make sure the wall mount template is positioned accurately
3. Use the tape to stick the wall mount template firmly on the wall.
4. Mark on the wall using each marking on the template through the mounting holes.
5. Take away the wall mount template.
6. Drill screw holes at each marking on the wall. Wall mount your Sound Bar Required tools:
7. Insert the wall anchors in the holes on the wa
8. Insert the included screws with the brackets into the hole of the wall anchors.
9. Fix and tighten the wall brackets and screws on the sound bar.
10. Replace the screws with the included long wall mount screws.
11.  Pick up the sound bar and attach it to the brackets, similar to how you would hang a picture. Make sure everything is tight
    Note: Do not place your sound bar in a location exposed to direct sunlight, heat, fire, or moisture Only suitable for mounting at heights: < 6 ft. 6.7′

Wall mount Your Surround Sound Speakers

Notes: Only suitable for mounting at heights: < 6 ft. 6.7″ Wall-mount bracket is not included

Connect to your TV

There are 2 ways to connect your sound bar to the TV (listed in order that we recommend): HDMI ARC (refer to 7a), and Optical (refer to 7b). If you have a Roku TVTM, simply plug in the HDMI cable to the ARC ports and follow the Roku TV ReadyTM on-screen instructions.

HDMI-ARC

Connect the Sound Bar to your TV with the included HDMI cable. Connect the Sound Bar to the power outlet with the included power cord

Enable CEC function on TCL TV.

• Connect HDMI cable from the HDMI (ARC) interface on the sound bar to the HDMI (ARC/eARC) interface on the TV.
• Enable the CEC function in the settings of the TCL TV. (See TV User Manual for instructions)

Enable CEC function on other brand TV.

1. Connect HDMI cable from the HDMI (ARC) interface on the sound bar to the HDMI (ARC/eARC) interface on the TV.
2. Enable the CEC function in the settings of the TV.
   Note: CEC (Consumer Electronic Control) function naming may differ by TV manufacturer. This feature may be Easy co. i Pease Be your tre user manual for more information.

Optical

Connect the Sound Bar to the TV with an Optical cable. Connect the Sound Bar to the power outlet with the included power cord. Warning: Do not bend or kink the optical cable (SPDIF) as it is fragile and can easily get damaged and broken

Pair with your Bluetooth device

You can stream music from your mobile device via Bluetooth.

1. Press .
2. Press .
3. Press and hold on the remote control
4. or press and hold on your sound bar.

5. You will see blue LEDs flashing rapidly.

6. The Sound Bar is ready to pair.

7. Power on your Bluetooth device and activate its Bluetooth function.
8.  Select TCL S510W.

9. You will see the blue light on for 3 seconds.

10. Pairing is successful.

11. If you want to pair another device, please repeat step 3.

Other connections  USB

Sup ported audio files: MP3, WMA, FLAC, WAV.

Other connections  AUX

Other connections – AUX VA

Your sound bar can connect to a Voice Assistant (VA) device through an AUX VA connection. Once connected, your sound bar will now act as the VA speaker.
Features and Benefits

• Voice Assistant Dedicated Input: VA is active on the sound bar even if the sound bar isset to a different input with audio playing.
• Auto Muting: If playing audio from the sound bar, the VA will play over the original source audio for 10 seconds. If continued after the 10 seconds, the VA audio will mute the original source audio. Once the VA audio is stopped the original source audio will resume.
• If you wish to disable Aux VA features, you canlong press button. Now you can use the Aux VA port as a standard Aux port for additional connections.

IR Pass-through

If the sound bar blocks the IR receiver of the TV when placed directly in front of it. You can use the included IR pass-through cable to send IR
commands to your TV using the sound bar. First connect one end of the IR pass- through cable to the IR connector on your sound bar. Next, place the other end with the IR blaster close to the TV’s IR receiver.

Trademarks

• Roku TV Ready
  Roku, the Roku logo, Roku TV, Roku TV Ready, and the Roku TV Ready logo are trademarks and/or counties to sumact hang or he most time it ony up one nes out ok. TV Ready-supported, please email rokutvready@roku.com.

• Dolby Audio
  Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

• Bluetooth
  The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. andany use of such marks by TTE Corporation is under license. Other trademarks and tradenames are those of their respective owners.
  dts
  For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, Digital Surround, Virtual:X, and the DTS logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2022 DTS, Inc. ALL RIGHTS RESERVED.
  HOMI
  10IFOCRIMITION MALIVECIA INTERPACE “The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logosare trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

DO NOT RETURN TO STORE
WE ARE READY TO HELP wont any quisions

• TAKE CARE WHEN REMOVING THE SOUND BAR
• TCL SUPPORT:
• support.tcl.com
• 1-877-300-9223

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>