GAMESIR X2 Pro Mobile Gaming Controller User Manual

June 14, 2024
GameSir

X2 Pro Mobile Gaming Controller
User Manual

X2 Pro Mobile Gaming Controller

GAMESIR X2 Pro Mobile Gaming Controller

PACKAGE CONTENTS

Game Sir- X2 Pro-Xbox 1
Carry Case
1
Concave Thumbstick Cap 2
Convex Thumbstick Cap
2
User Manual 1
Thank You & After- sale Service Card
1
Game Sir Sticker 1
Certification
1

REQUIREMENTS

  • Android phone ( Android 8. 0 or above) with a Type- C port

  • With a length of 110- 179 mm

  • OTG On*

  • Android phones such as Huawei, Xiaomi, Samsung and Google have been enabled OTG by default. For other phones, please refer to the requirements of respective phones.GAMESIR X2 Pro Mobile Gaming Controller - DEVICE LAYOUTGAMESIR X2 Pro Mobile Gaming Controller - DEVICE LAYOUT1

INSTALL THE PHONE

GAMESIR X2 Pro Mobile Gaming Controller - PHONE

DETACH THE PHONE

GAMESIR X2 Pro Mobile Gaming Controller - PHONE1

CHARGE THE PHONE THROUGH THE CONTROLLER

GAMESIR X2 Pro Mobile Gaming Controller - PHONE2

  • Only some Android phones are supported pass- through charging. Not all Android phones are supported.

SWAP ABXY BUTTON POSITIONS

GAMESIR X2 Pro Mobile Gaming Controller - BUTTON

BACK BUTTONS SETTINGS

GAMESIR X2 Pro Mobile Gaming Controller - SETTINGS

  1. Set M1 / M2 button value: Press the View + Menu + M1 / M2 buttons simultaneously for 3 s. When LED 1 & LED 2 flash simultaneously, tap the button you want to map to M1 / M2 button. LED 1 & LED 2 simultaneously flash twice  rapidly and go out to indicate M1 / M2 button value is set.
  2. Cancel M1 / M2 button value: Press the View + Menu + M1 / M2 buttons simultaneously for 3s. When LED 1 & LED 2 flash simultaneously, tap M1 / M2 button. LED 1 & LED 2 simultaneously flash twice rapidly and go out to  indicate M1 / M2 button value is canceled.

JOYSTICKS & TRIGGERS CALIBRATION
Press the View + LT buttons simultaneously for 3 s until LED 1 & LED 2 quickly flash alternately, then release the key. Slowly rotate the joysticks at their maximum angles for 3 times. Then slowly press LT & RT to their maximum travel for 3 times. Finally, press LB+ RB simultaneously. LED 1 & LED 2 stop flashing to indicate the calibration is over.

DOWNLOAD GAMESIR APP

Scan below QR code to download Game Sir App.
After the mobile phone is successfully connected to the controller, you can directly enter Game Sir App and use functions such as controller test, button layout settings  and firmware upgrade.

https://www.gamesir.hk/pages/gamesir-app

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals