COMPASS CONTROL KD-WP8-2 IP Module User Guide
- June 11, 2024
- COMPASS CONTROL
Table of Contents
KD-WP8-2
IP Module Manual
Compass Control® Tech Guide
KD-WP8-2 IP Module
About:
8 Button Programmable IP, IR, RS-232 Wall Plate Control Keypad with PoE. KD-
WP8-2 with Compass Control will provide an easy control via IP.
Control:
Compass Control module provides:
- Device name
- 8 button names
- 8-Button control (two-way)
Setup Communication:
Control a KD-WP8-2 (keypad) via TCP/IP
TCP/IP module:
-
Ensure all IP devices are in the same network.
(e.g. iPad, Controller, etc.) -
Set the desired IP address of the KD-WP8-2 via the Web or KDMSPro
-
In Compass Navigator, enter the right IP address and the port “23” into the device properties tab.
Setup Complete:
Before uploading, ensure you program all buttons on Web UI.
Upload and update Compass project for use.
Control UI
When the module runs at first, the device name, button names, and button
colors will be synchronized with the KD-WP8-2 unit. Control the keypad by
pressing each button on module. During control, if you change any information
(e.g. names, button type, color, etc), you can press “refresh” button manually
at the bottom right corner. The module will be updated right away.