Babelio A7 Baby Gate for Doorways and Stairs User Guide

June 15, 2024
Babelio

PROTECTOR
SAFETY GATE
USER MANUAL (GUIDE)

Customer Service
For any questions, please feel free to contact us on:
Email: support@babeliobaby.com
Social Channels 2017-2022 babelio All rights reserved

Before Installation

Babelio A7 Baby Gate for Doorways and Stairs - Fig 1

Warning: Please do not cut the zip tie until you finish installation, preventing the gate from swinging back and forth.

Installation Location

Bottom of stairs
If the gate is used at the bottom of the stairs, it must be placed on the lowest stair to prevent children from climbing upstairs.

Top of stairs
If the gate is used at the top of the stairs, it must be placed 15cm(6in) back from the top step to prevent children from falling down the stairs.

Warning: NEVER use the gate on stairs without wall cups or other mounting hardware.

Doorway & Opening
Warning : Install the gate as close to the ground as possible.

Babelio A7 Baby Gate for Doorways and Stairs - Fig 5

Pressure-Mounted Installation

Babelio A7 Baby Gate for Doorways and Stairs - Fig 6

Hardware-Mounted Installation

Use the Gate Extensions

Warning: NEVER install three extension frames on the same side of the gate.

Use the Reinforcement Groove

Secure gate extensions with reinforcement groove.

Use the Y-Spindle Rod

Secure the gate to round baluster with Y-spindle rods.

Babelio A7 Baby Gate for Doorways and Stairs - Fig 13

For stairs with round baluster or baluster with diameter less than 1.2in, install safety gate with the Y-spindle rod.

NOTE

  1. The gap between the gate latch and the frame is NOT a defect.
    This gap will be eliminated after installation.

  2. If you cut off the zip tie before installation, you can still install the safety gate normally.

WARNING
You MUST install wall cups to keep gate in place.
Without wall cups, child can push out and escape.

WARNING
Children have died or been seriously injured when gates are not securely installed.

  • ALWAYS install and use gate as directed using all required parts.
  • Install according to manufacturer’s instructions.
  • STOP using when a child can climb over or dislodge the gate.
  • Use only with locking/latching mechanism securely engaged.
  • NEVER use a gate to keep child away from pool.
  • NEVER leave child unattended.
  • TO prevent falls, never use at top of stairs without wall mounting cups and door stopper.
  • Always close and lock gate behind you.
  • This product will not necessarily prevent all accident.
  • Do not use if any components are missing or damaged.
  • Intended for use with children from 6 months-24 months.
  • Adult assembly required.
  • Exercise care when unpacking and assembling product.
  • Install with this side AWAY from child.

Prolinx Global LTD
27 Old Gloucester Street London, WC1N 3AX, UK
Manufacturer:Hong Kong Lute Technology Co., Limited
Address: Room 02, 21/F, Hip Kwan Commercial Building, 38
Pitt Street, Yau Ma Tei, Kowloon,Hongkong
E-mail: support@babeliobaby.com
Product Name: Baby Safety Gate
Model Number: CB-M-101
Date code: 2022-06
US Importer:
Company: PACIFIC FORTUNE MANAGEMENT INC
Address: 145 E Duarte RD Suite AA 198 Arcadia CA 91006
Telephone: 213-820-0156
Prolinx GmbH
Brehmstr. 56, 40239 Duesseldorf Germany
Address: Room 02, 21/F, Hip Kwan Commercial Building, 38
Hersteller: Hong Kong Lute Technology Co., Limited
Address: Room 02, 21/F, Hip Kwan Commercial
Building, 38 Pitt Street, Yau Ma Tei, Kowloon,
Hongkong
E-Mail: support@babeliobaby.com
Produckname: Baby-Sicherheitsgitter
Modellnumber: CB-M-101
Datumscode: 2022-06

MADE IN CHINA.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals