deep White Noise Machine and Wireless Bluetooth Speaker User Manual
- June 14, 2024
- deep
Table of Contents
deep White Noise Machine and Wireless Bluetooth Speaker
Introduction
- Congratulations on getting your DEEP Bluetooth® speaker. Better sleep at night and focus at work await you! But first, please read our simple instructions on how to use it.
WHAT’S IN THE BOX
-
DEEP speaker unit
-
5V USB wall charger
-
Micro USB charging cable
-
User manual
Power/Charge: Connect your speaker to a power source using the included Micro USB cable and wall charger.
Press the power button for 2 seconds to turn the speaker ON. Press once to
turn it OFF.
AMBIENT SOUND MODE
(built-in sounds for better sleep & focus)
Press the left/right arrow buttons to play different built-in sounds.
10 ambient sounds included in the speaker.
-
Rain & Thunder
-
Campfire Night
-
Steady Rainfall
-
Singing Birds
-
Ocean Waves
-
Zen New Age
-
Water Stream
-
Deep White Noise
-
Deep Pink Noise
-
True Sound Masking
Increase or decrease the volume by pressing the plus/minus buttons.
BLUETOOTH PAIRING MODE
Press the Bluetooth button to activate Bluetooth pairing mode.
The Bluetooth button light will blink. The speaker is ready to pair.
On your audio source device, connect to Soft dB // DEEP
Once connected, start playing music from your audio source device.
Press the Bluetooth button for 5 seconds to disconnect Deep from your device. It is now ready to pair with a new device.
Press the Bluetooth button once to disconnect Bluetooth mode and listen to in- built ambient sounds.
Meaning of different button lights and blinking patterns.
| | |
---|---|---|---
| Fixed light| Slow blinking| Fast blinking
| Full battery| Charging| Low battery
| Connected| Ready to pair|
Automatic Features
- Auto Blackout Mode: Button lights and sound masking back-lit indicator shut off automatically after 3 minutes.
- Settings Recall: Playback mode, sound selection, and volume level are remembered when the speaker is turned off and on again.
Resetting to factory settings
- Connect your speaker to a power source using the included Micro USB cable and wall charger.
- Press and hold the power button for over 5 seconds. The speaker will be restored to original factory settings.
Electrical Specifications
Input voltage: 5V DC
Input current: 1A
Standby power: <1mW
Latest version of the User manual & Certifications
- For the latest version of the user guide and more information on our certifications, please visit deep.softdb.com
- FCC and ISED Canada Compliance: This device complies with Part 15 of the FCC Rules and ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>