amazon basics B087QLPMLF Soft Roll Up Tonneau Cover Instruction Manual

**amazon basics B087QLPMLF Soft Roll Up Tonneau Cover Instruction Manual

**

TOOLS

A(x1) Cover roll

B(x1) Left side rail

Cix1) Right side rail

D (x 6) Side rail clamps

E(x1) Carry bag

F(x1) Sealing foam strip

For BO87QM1WWC only: Aluminum blocks for Toyota Tundra

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions carefully and keep them for future use. If this product is passed to a third party, then these instructions must be included.

When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:

WARNING
Risk of damage!
Failure to properly install this product may result in property damage and/or personal injury.

• This cover should be installed and maintained by a qualified professional only.
• Regularly verify that all the components and fasteners are secure.
• Do Regularly examine the cover for wear and tear, including corrosion. Replace at the first sign of damage or if parts become detached.
• Do not use this cover if any parts are missing, damaged, or worn.
• Do not modify the cover in any way. Unauthorized modification may impair the product’s function and/or safety and could affect its service life.
• Do not place objects on or against the cover.
• Never stand, sit, or ride on the cover or allow others to do so.
• Do not cover cargo higher than the cover.
• Do not tie cargo to the cover. Do not use the cover’s framework to tie down cargo.
• Never allow children or pets to occupy the tonneau while the cover is closed.
• Do The cover does not prevent moisture and dust from entering the tonneau. Special wrapping or packaging of the contents may be necessary to keep the cargo clean and dry.
• Do not leave valuables in an unattended vehicle, as the cover does not prevent theft of contents in the tonneau.
• The cover must be rolled fully open and secured with safety straps when towing a vehicle backwards.
• Avoid storing the cover in a rolled-up position for long periods of time.
• Secure the cargo so it does not shift nor rub against the cover while transporting, whether in the open or closed position.
• Use caution when operating the cover in windy conditions.
• Remove snow or debris from the top of the cover before rolling itup.
• When rolling up the product, ensure the straps secure the cover tightly before driving to reduce the risk of accidents.
• The product might not be 100 % waterproof due to gaps, modifications, or improper installation in the compartment itself.

Intended Use

• This product is intended for securing and protecting truck beds and the contents inside.
• No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

Before First Use

DANGER
Risk of suffocation!
Keep any packaging materials away from children — these materials are a potential source of danger, e.g. suffocation.

• Remove all the packing materials.
• Remove and review all components before starting installation.
• Do Check the product for transport damages.

Compatible Vehicle Models

Sierra 2500 3500 HD, Fleetside 6.5′ Bed
BO87QN5WMY| 2002-2018 Dodge Ram 1500, 2003-2018 Dodge Ram 2500 3500, Fleetside 6.5′ Bed without Ram Box
BO87QLXGDW| 2009-2018 Dodge Ram 1500, Fleetside 5.8′ Bed without Ram Box
BO87QNYTHQ| 2015-2019 Ford F-150, Styleside 5.5′ Bed
BO87QLPMLF| 2015-2019 Ford F-150, Styleside 6.5′ Bed
BO87QMTWWC| 2014-2019 Toyota Tundra, Fleetside 5.5 Bed

Installation

NOTICE The tonneau should be clean and clear of any obstructions before installation.

1. Check for any height differences between the front and side bulkheads. Install sealing foam strip (F) to the front bulkhead if it is lower. Once installed, the front and side bulkheads should be at the same height.
   

2. Place the cover roll (A) on the front bulkhead and set the two side rails (B, C) on the side bulkheads.
   

3. Slide the side rails (B, C) into the plastic corners on the cover roll (A), then tighten the screw to secure into place.
   

4. Place side rail clamps (D) loosely and evenly on each side bulkhead. The number of rail damps needed depends on vehicle model and size of the tonneau.
   

5. Align the cover position with the truck bed.
   

6. Install the front clamps as close to the front bulkhead as possible. Tighten the two front clamps with a socket and wrench to secure it into place.
   

7. Secure and tighten the remaining clamps into place.

Closing the cover

CAUTION

• To prevent accidental release of the tailgate header, ensure the header is securely latched to the side rails on both sides of the tonneau before driving the vehicle.

• To prevent wind lift, secure the hook-and-loop fastener along the entire length of both side rails before driving the vehicle.

  1. Open the tailgate then release the safety straps and unroll the cover over the truck bed ensuring that the central crossbars is resting on the side rails.

  2. With the tailgate open, hook the tailgate header into the header stops on both sides of the vehicle.
     

  3. With the tailgate open, hook the tailgate header into the header stops on both sides of the vehicle.
     

  4. Push down on the tailgait header until both latches engage. The latch should make a click sound when fully secured.

  5. Pull the cover tight across the width of the tonneau. Secure the hook-and-loop fastener on the opposite side rail.
     Use both hands to close!!!
     
     

NOTICE Always secure the cover first before closing the pickup bed tailgate.

For Toyota Tundra only (B087QM1WWC)

1. Insert aluminum blocks (G) into the utility side tracks (on both sides of the tonneau).
   

2. Attach the upper part of the side rail clamp (D), then tighten the screw and bolt to secure into place.
   

Opening and securing the cover

1. Open the tailgate.
2. Pull the cover back and carefully, using both hands, disengage the tailgate header from the header stop.
3. Roll up the cover. Do not undo the hook-and-loop fasteners prior to rolling up the cover.
4. Secure the cover at the front of the tonneau with both safety straps when the cover is open.

Cleaning and Maintenance

Cleaning

• To prolong the usage and function of the cover, check it regularly for wear, proper fit, and debris caught on the cover.
• Check mounting hardware regularly to ensure that all clamping mechanisms are tight and secure.
• Clean the cover and vehicle in a shaded place like under a tree or in an open garage.
• Flood the cover with water to remove surface grit that will scratch the finish when wiped. Wash the cover with cool, clean water and a mild soap.
• Use a hose, rinse the cover well, making sure to remove all traces of soap and wipe off excess water using a sponge.
• Hose down the entire truck to prevent soap from streaking your truck’s paint finish. Do not use chemicals like detergents, dish washing liquids, bleaches, harsh cleansers, strong cleaners, dry-cleaning solvents, or any other strong chemicals as a cleanser.
• Apply quality vinyl cleaner that you can find in your local auto shop. Using a white all-cotton towel, wash the entire cover with the cleaner. Never spot clean the cover to avoid rings or bright spots on the product. Make sure that you only use a soft cotton cloth or sponge as a cleaning tool.
• Do not use rough, abrasive cleaning pads because these can scratch the vinyl, creating pores that allow dirt and other unwanted particles to stick. Do not use vinyl protectants that contain petroleum, silicone, or citrus-based additives.

Maintenance

• Check the components regularly to make sure all screws and bolts are tightened.
• Keeping the cover taut: Periodically or as needed, pull the cover tight across width of the truck bed and secure the hook-andloop fastener on the side rails.

Specifications

x 184.3 cm)
BO87QMBGTB| approx. 68.81″ x 1.57″ x 82″ (174.8 x 4 x 208.3 cm)
BO87QN5WMY| approx. 70.74″ x 1.57″ x 78.38″ (179.7 x 4 x 199.1 cm)
B087QLXGDW| approx. 67.40″ x 1.57″ x 69.05″ (171.2 x 4 x 175.4 cm)
BO87QNYTHQ| approx. 67.63″ x 1.57″ x 69.05″ (171.8 x4 x 175.4 cm)
BO87QLPMLF| approx. 67.83″ x 1.57″ x 80.94″ (172.3 x 4 x 205.6 cm)
B0O87QMTWWC| approx. 67.91″ x 1.57″ x 69.05″ (172.5 x 4 x 175.4 cm)

Feedback and Help

Love it? Hate it? Let us know with a customer review.

AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

amazon.com/review/review-your-purchases#
 amazon.com/gp/help/customer/contact-us
—or—
contact Customer Service at +1 877-485-0385

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>