Sciener G3P Smart Lock Gateway User Manual
- June 4, 2024
- Sciener
Table of Contents
Sciener G3P Smart Lock Gateway User Manual
SMART LOCK GATEWAY G3P
Model: G3P
Dimensions: 70mm x 70mm x 26mm
Network port interface: RJ45
Network port rate: 10M/100M
IEEE standard: 802.3
Power interface: Type-C USB/PoE
Power input: 500mA
Light Status
Pair the Gateway with App
-
Open the APP
-
Tap the icon on the top left of the screen
-
Select [Gateway]
-
select [G3]
-
Connect the network cable to the gateway (with PoE power supply)
-
Tap “Next step” when the red and blue light flash alternatively
-
Tap ” + ” to add the gateway
Notice: If the above process times out, please power off and try again.
Limited Warranty
- For any defect in material and workmanship, the original purchaser of the product can:
- Return or ask for a replacement within 7 invoice days.
- Ask for a replacement within 15 invoice days.
- Ask for free repair in 365 invoice days.
- This warranty does not cover defects caused by modification, alteration, misuse or physical abuse of the product.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Disclaimer
We continuously optimize products as new technologies and features are
developed. For this reason, we reserve the right to make alterations to the
products without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>