HDMI HDVW3X3 4K 3×3 Art Video Wall Controller User Manual
- June 14, 2024
- HDMI
Table of Contents
- HDMI HDVW3X3 4K 3×3 Art Video Wall Controller
- Introduction
- Features
- Specifications
- Remote control
- Physical interface diagram
- Common splicing mode reference
- Art splicing mode reference
- Connection diagram
- Application scene
- Package includes
- Open splicing setting software
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HDMI HDVW3X3 4K 3×3 Art Video Wall Controller
Introduction
This 4K 3X3 Art VIDEO WALL CONTROLLER, supports HDMI/USB3.0 input. via USB 3.0 port video can complete a variety of screen splicing effects. The resolution of USB 3.0 input is up to 4K and high-definition output to monitor. It is widely used in teaching, restaurants, stations, and other places. As a video wall controller, the main function is to divide a single complete HDMI HD image signal into 9 parts and distribute to 9 display units (Rear projection screens, LCD TV.), which is composed to be a dynamic image wall. The operation is plug-and-play and does not need the control software.
Features
- Support HDMI/USB3.0 video source input;
- Support 9-way HDMI output;
- Support multiple splicing modes, easy to handle, plug and play;
- Support discretionary splicing;
- Automatically calculates optimal resolution to monitor;
- Effectively solve the splicing deformation;
- Perfectly show images without stretching;
- Only support Win10 system 64 bit;
- Support screen any degree rotation;
Specifications
- HDMI input resolution …………………………………. the highest support 3840×2160/30Hz
- HDMI output resolution ……………………….……….. support 1920×1080/60Hz(one port)
- Support audio format ………………..………………………………………………………………. stereo
- Input cable length ………………………………………………… ≤8m AWG26 HDMI standard cable
- Output cable length ………………….…………………… ≤10M,AWG26 HDMI standard cable
- Max working currently…………………………………………………………………………….. 2.6A
- Power adapter specifications ……………………..………… input AC (50Hz, 60Hz) 100V-240V
- Output 12V DC/3A
- Operating temperature range ………………………………………………….. (-10℃~ +45℃)
- Dimension (L x W x H) …………………………………………………………. 305x185x35(mm)
- Weight ….…..…………………………………………………………………..…………………. 1739g
Remote control
Physical interface diagram
Ports | Function description |
---|---|
RS232 | RS232 port,For general splicing setup |
Switch | Switch choosing button,tap to switch the signal source between the |
external HDMI source or USB3.0 video source input
Mode| Switch splicing mode button
IR| Infrared receiving window, for receiving order of remote control
Input| USB3.0 signal source input
R/L| 3.5mm headphone Jack, analog audio stereo output
ON/OFF| Power switch
Output1-9| Video wall controller HDMI signal output port, steady blue light
indicates that the
video wall controller and the displays are successfully connected
HDMI IN| HDMI video signal source input
(Indicator red light USB 3.0 input ; Indicator blue light HDMI input )
DC/12V| DC 12V power port, for connect with 12V/3A power adaptor
Common splicing mode reference
Art splicing mode reference
Remark: The above art splicing shapes are only for reference, more art splicing can be set in the software. Art wall splicing can only be done through the signal source of the USB 3.0 input port.
Connection diagram
Application scene
Package includes
- 4K 3×3 Art Video Wall Controller 1PC
- Remote control 1PC
- 12V DC power adaptor 1PC
- USB 3.0 cable 1PC
- User manual 1PC
Attachment: The product can be cascaded by two sets to complete 3X4 and 4X4 modes ( Using remote control to set.)
Note: Using remote control to set the splicing mode:
- 3X4 mode: video wall controller A chooses 3×4(A); video wall controller B chooses 3×4(B);
- 4X4 mode: video wall controller A chooses 4×4(A); video wall controller B chooses 4×4(B);
Art splicing software installation
Using the art splicing function need to install two software
SMI Display Server Art Video Wall
SMI Display Server(This software is a control program, with no operation
interface)
- click the SMI button twice
- Click install
- Complete software installation(Restart the computer, then run )
Art Video Wall
- Click the Art Video wall.exe button twice
- Click install
- complete software installation
Software operation
( For example windmill shape splicing )
Open splicing setting software
- Art splicing template preset: Click the button
- lick template preset twice
- Switch to “ Deploy” and save the file
- Select the computer that needs to splice: (This computer needs to install the control program and be in the same local area network)
- Choose the splicing equipment
- Adjust position, click this button
- .Confirm position and output port
- Click confirm setting is finished
For more detailed software operations, please refer to the operation manual. (The software operation manual is in the installer compressed package)
NOTE: Minimum requirements for PC:
- Processor: Intel’s Core i5 -8500;
- Ram: 16GB (2x8GB dual-channel)
- System: Windows 10.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>