HDMI HDES200KVM KVM 200 extender User Manual
- October 27, 2023
- HDMI
Table of Contents
HDES200KVM KVM 200 extender
HDMI®
HIGH-DEFINITION MULTIMEDIA INTERFACE
USER MANUAL
HDMI 200M KVM IP EXTENDER
Enjoy the vivid world
Introduction
HDMI 200M Extender over IP is based on TCP/IP standard. It transmits your HD display with the high resolution up to 200 meters away from your DVD or computer source by using one CAT5e/6 cable. At the same time, it’s convenient to transmit HDMI audio and video source by point-to point mode, one point-to- many mode and cascade connection mode.
Features
- Support point-to-point mode, one point-to-multi point mode and cascade connection mode.
- 802.3 Ethernet standard.
- Support IR remote control
- Support USB mouse and keyboard extension.
- The design of pure hardware, plug and play, no need for additional software.
Specifications
Resolutions.. 480p,720p, 1080p
Audio….. Sample rate:32kHz,44.1kHz and 48kHz code
IR remote control 38 KHz (NEC)
Power adapter.. DC:5VMA
The Max Power consumption…HDMI sender:2.5W HDMI receiver:2W
Size(L-W-H …. 1638724mm
Weight…474g x2
Operating Temperature/Humidity. 0C-45 C/10%-80%RH(no condensation)
Storage Temperature/Humidity. 10 C-70 C/5%-90%RH(no condensation)
Physical interface diagram
HDMI Transmitter
Port Description
DC/5V 5V power supply for the Transmitter
HDMI-IN —HDMl input ,connect HDMI signal source
HDMI – OUT HDMI output, connect HDMI display device
IR-TX Connect IR transmitter
USB USB output, connect computer
Ethernet Network interface by cat5e/6
Port Description
DC/5V 5V power supply for the receiver
HDMI -OUT HDMI output, connect HDMI signal device
IR-RX Connect IR receiver
USB1-2 USB input, mouse/keyboard input
Ethernet Network interface by cat5e/6
Application diagrams
Application 1:
Application 2:
Application diagrams HDMI 200M extender over IP is used in audio-visual conference, command and control center, ticketing platform, home theater, multi-media teaching, conference system and so on.
Connection and operation
- Connect the HDMI source (such as DVD, PS3, STB ) to the “HDMI IN of transmitter by HDMI cable.
- Connect the “HDMI out of Receiver to HDTV display by HDMI cable.
- Connect the Transmitter and Receiver with one cat5e/6 cable (recommend).the furthest distance is 200M.
- Connect the “IR receiver “into “IR-RX” port on receiver, and “IR transmitter” into the “IR-TX” on transmitter, and make sure the IR transmitter aim at IR port of the source.
- Plug the mouse and keyboard into the USB port of the receiver, and connect the USB port of the transmitter with the computer if you need the KVM control function.
- Connect two pieces of 5V power supply to the transmitter and receiver, and power on the HDTV display and HDMI source.
The Package contents :
- Transmitter 1PCS
- Receiver 1PCS
- 5V/1A Power adapter 2PCS
- IR cable 1Pair
- User’s Manual 1PCS