HDMI HD0303K 4K 3×3 Video Wall Controller User Manual
- June 6, 2024
- HDMI
Table of Contents
USER MANUAL
4K 3×3 Video Wall Controller
Enjoy the vivid world
Introduction
The 4K 3×3 video wall controller, support 1-way HDMI input and 9-way HDMI
outputs, the main function is to divide a complete HD image signal into 9
locks and assign to 9 video display units(such as Rear projection unit, LCD
TV, etc.), Complete with 9 HDMI high-definition video display units to form a
large dynamic image screen.
As a video wall controller, It supports the display of a single complete
picture with HD multiple splicing modes, composes a video wall perfectly
without any control software, plugging, and plays, easy to operate.
It was widely used in occasions of advertising screens, restaurants, teaching,
etc.
Features
- Support HDMI input;
- Support 9 HDMI outputs;
- Support multiple splicing modes, easy to operate, plug, and play;
- Support 8/10/12 bit deep color;
- Support IR control.
Specifications
HDMI input resolution …………. the highest support 3840×2160/30Hz
HDMI output resolution ………………… the highest support1920x1080/60Hz
Support audio format ……………………… stereo
Input cable length ……………….. ≤8m AWG26 HDMI standard cable
Output cable length ………………. ≤10M, AWG26 HDMI standard cable
Max working current ………………1.6 A
Power adapter specifications ………………. input AC (50HZ, 60HZ) 100V-240V
Output 12V DC/3A
Operating Temperature range ………… (-10℃~ +45℃)
Dimension (L x W x H) ………………305x185x35(mm)
Weight ….…..…………………………1747g
remote control:
Physical interface diagram
Ports | Function description. |
---|---|
RS232 | RS232 port, video wall controller serial port connection. |
Mode | Splicing mode button. |
IR | Infrared receiving window, for receiving the order of remote control. |
R/L | 3.5mm headphone Jack, analog audio stereo output. |
ON/OFF | Power switch. |
Output-9 | Video wall controller HDMI signal output port, Steady green light |
indicates that the video wall controller and the displays are successfully
connected.
HDMI IN| For external HDMI video signal source input.
DC/12V| DC 12V power port, for connecting with 12V/3A power adaptor.
Common splicing mode
CONNECTION DIAGRAM
Package includes
1:4K 3×3 video wall controller
2:Remote controller| 1PCS
1PCS| 3:12V DC power adaptor
4:User’s manual| 1PCS
1PCS
---|---|---|---
Attachment: The product can be cascaded with two sets to complete 3X4 and 4X4 modes ( Using the remote control to set.)
Note: Using the remote control to set the splicing mode:
3X4 mode: video wall controller A chooses 3×4(A);
video wall controller B chooses 3×4(B);
4X4 mode: video wall controller A chooses 4×4(A);
video wall controller B chooses 4×4(B);
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>