HDMI EXTENDER 14.99 KVM Point Point Extender User Manual
- May 15, 2024
- HDMI EXTENDER
Table of Contents
User Manual
KVM Point to Point Extender
14.99.3042
Important Safety Notice
- Please distinguish the transmitter and receiver before installation.
- Do not disassemble the machine to repair the product during the working process to avoid electric shock.
- Please cut off the power before installation. Live installation may damage the equipment.
- Do not expose the devices to rain, moisture and liquid.
- Use a 5V/1A DC adapter only. Make sure the specification matched if using 3rd party DC adapters.
Features
- Zero latency.
- Support up to 1080p@60Hz resolution.
- Supports Cat6/6A/7 network cables, the transmission distance is up to 70 meters.
- Support KVM remote control and management.
- Support 1080p HDR10, YUV4:4:4.
- Support EDID pass-through.
- Transmitter supports HDMI loop-out.
- Receiver supports 3.5mm stereo audio output.
- Audio formats supported: PCM, LPCM, DTSHD, DTSAudio
- Automatically adjusts parameters to match different network cables and achieve the best display performance.
- Lightning Protection, Surge Protection, ESD Protection.
Package Contents
Installation Requirements
- HDMI source device (compute graphics card, DVD, PS4, HD monitoring equipment etc.)
- HDMI display device like SDTV, HDTV, projector with HDMI port.
- UTP/STP Cat6/6A/7 cable, follow standard IEEE-568B, It is recommended to select a network cable with less loss and crosstalk.
Interfaces
- Transmitter (TX)
1| DCSV input| Connect
to the 5V1A DC power adapter.
---|---|---
2| HDMI output| Connect to a local HDMI display device.
3| HDMI input| Connect to a HDMI source device.
4| Reset button| Press the button to restart the device.
5| R.145 signal output| Output modulated HDMI signal.
6| USB-A port| Connect to the computer.
7| KVM indicator| a)The indicator lights off when computer is not connected.
b)The indicator stays on when computer is connected.
c)The indicator flashes when the mouse and keyboard work normally with a signal transmission.
8| Power/Signal indicator| a) The indicator flashes when the device is powered but has no HDMI signal transmission.
a) The indicator stays on when there is an HDMI signal transmission. - Receiver (RX)
| 1 | DCSV input | Connect to the 5V1A DC power adapter. |
|---|---|---|
| 2 | 3.5mm L/R out | Connect headphones or power amplifiers to output stereo |
audio.
3| HDMI output| Connect to a HDMI display device.
4| Reset button| Press the button to restart the device.
5| Rj45 signal input| Input modulated HDMI signal.
6| USB-A port| Connect mouse and keyboard.
7| KVM indicator| a)The indicator lights off when computer is not connected
b)The indicator stays on when the mouse and keyboard is connected
c)The indicator flashes when the mouse and keyboard work normally with a
signal transmission
8| Power/Signal indicator| b) The indicator flashes when the device is powered
but has no HDMI signal transmission
b) The indicator stays on when there is an HDMI signal transmission
Installation Procedures
-
Connection
Note: When using
the 3.5mm stereo audio jack, please switch the audio output format of the
signal source to PCM format.
The network cable should follow the standard of IEEE-568B. It is recommended to select a network cable with less loss and crosstalk. -
1-Orange/white 2-Orange 3-Green/white 4-Blue 5-Blue/white 6-Green 7-Brown/white 8-Brown -
Connection instruction
- Connect the source device to the HDMI in port of the transmitter with an HDMI cable, and connect the HDMI out port of the receiver to the display device with another HDMI cable.
- Connect the CAT out port of the transmitter and the CAT in port of the receiver via a network cable (Cat6/6A/7).
- If using HDMI loop out, connect the display device to the HDMI OUT port of the transmitter.
- Plug the power supply into the device to get started.
NOTE: It is recommended to use a length range within 2~70m network cable. If the cable is too short, there may be no display output because the signal is too strong. If the cable is too long, the output may be with poor quality.
Q: There is no output on screen when all connections are correct?
A: 1) Please make sure the HDMI cables support the resolution of the output signal from the source device. 2) Please check and make sure the network cable inserts to the RJ45 port well. 3) Restart the transmitter or receiver by pressing the reset button.
Q: Black screen happened on the display/monitor?
A: 1) Check if the length of the cable is within the specified range. 2) Reset the transmitter to re-built the connection.
Q: The display shows unusual color or no sound?
A: 1) Reset the transmitter or receiver to re-built the connection. 2) Check if the HDMI cables are connected well. 3) Reconnect the network cable.
Specification
| Items | Specification |
|---|---|
| Power supply | Voltage/Current |
| Power consumption | TX<2.5W RX<2.5W |
HDMI
Performance And Interface| HDMI compliance| HDMI 1.3
HDCP compliance| HDCP 1.4
HDMI resolution| 800×600, 1024×768, 1280×720, 1280×960,
1366×768, 1440×900, 1680×1050, 1920×1080,
480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@ 24/25/30/50/60Hz
Supports audio formats| PCM, LPCM, DTSHD, DTSAudio
Input and output TMDS signal| 0.7-1.2Vp-p(TMDS)
Input and output DDC signal| 5Vp-p(TTL)
Input cable length| 58m(AWG24)
| Output cable length| 58m(AWG24)
---|---|---
Transmission Distance| Cat6/6A/7| 570m
Protection Level| Electrostatic protection of the whole machine|
Implementation of the standard: IEC61000-4-2 la Contact discharge level 4
(8KV)
lb Air discharge level 4 (15KV)
Operating Environment| Working temperature| -2060°C
Storage temperature| -3070°C
Humidity (no condensation)| 0 —90%RH
Body properties| Dimension| 75.0(L) x 85.0(W) x 20.0(H)mm
Material| Aluminum alloy material + crystal panel
Treatment process| Grit blast
Color| Black
Weight| TX: 180g RX:180g
Disclaimer：
The product name and brand name may be registered trademark of related
manufactures. ™ and ® may be omitted on the user manual. The pictures in this
user manual are just for reference. The terms HDMI, HDMI High-Definition
Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. We reserve the rights to make
changes without further notice to a product or system described herein to
improve reliability, function, or design.