SIVGA-SO2 Open Ear True Wireless Earphone User Manual
- June 14, 2024
- SIVGA
Table of Contents
SIVGA-SO2 Open Ear True Wireless Earphone
User’s guidance
Thank yau for choosing the SIVGA-S02 Open Ear True Wireless Earphone! For your
better use of the product, please read the Quick Start Guide carefully before
using and store it properly.
- Wearing: Designed with ear hooks, wear light and comfortable, make wearing more comfortable.
- Sound : 14.2mm special dynamic driver of PU + titanium diaphragm with special sound-oriented design, make excellent sound performance.
- Bluetooth: VS.3 bluetooth version, fast connection, more stable transmission, and smooth call experience at all times.
- Battery life: The Earphone is equipped with a 85mAh battery, the standby time is up to 150 hours, and the continuous call is up to 10 hours.
Package Content
Wearing Guide
Step one
Toke out the earphones from charging case , Adjust earphones downwards to a
proper position and push earphones into your ears. Slight adjust earphones to
fit you best.
Control Pannel
Setup steps for first time use
- Peal off the insulating stickers on the left & right earphones.
- Put the earphones back into the charging case and fully charge them.
- Take out the earphones from the charging case and wait for 3 seconds for successful pairing
- Wear the earphones.
- Open the Bluetooth settings and select “SIVGA SO2” and connect.
Pairing & Reconnection
- When the charging case is fully charged, remove the earphones from the charging case and let the left and right earphones automatically switch into the state of mutual pairing. The white light of the main ear blinks quickly in the pairing state.
- At this time, please find the Bluetooth name “SIVGA SO2 ” in the cell phone Bluetooth list, click on the connection, the earphones will sound a “Connected” beep after a successful connection.
- SIVGA-SO2 earphones can remember the last paired device. To connect again, you need to turn on the phone’s Bluetooth, The earphones will automatically connect to the phone when taking them from the charging case. Please select “SIVGA SO2 ” again in the Bluetooth list to connect if not automatically connected.
- Single earphone use mode If you need to use the right or left earphone separately on different cell phones, the left and right earphone need to be 20 meters away from each other to search for SIVGA SO2 and connects the cell phones). When an individual uses one earphone alone, the other one – the left earphone or the right earphone, needs to be put in the charging case .
How to charge
Charging case charging
- Please use a charger below 5V-1A, Charge with a Type-C charging cable.
Charge the earphones:
Earphone battery level <20%: solid red
20% < Earphone battery level < 95%: solid yellow Earphone battery level >95%:
solid green
Product Parameters
- Bluetooth Version: V5.3
- Bluetooth distance: :?:10M
- Support System: Android /Apple
- Audio decoding: Suppport AAC/SBC
- Working time: Continuously play music? OH(50% Volume)
- Driver: 14.2mm/160
- Sensitivity : 106dB±3dB
- Frequency range : 20 – 20kHz
- Charging case battery capacity: 520mAh
- Earphone battery capacity:85mAh
Open Ear True Wireless Earphone
- Bluetooth version: V5.3
- Speaker size: 14.2 mm
- Impedance: 162
- Sensitivity: 106‡3dB
- Transmission range: Effective distance 10 meters
- Gross weight: 74 g
- Frequency range: 20-20000Hz
- Battery capacity of earphone: 85 mAh
- Battery capacity of charging box: 520 mAh
- Charging time: about 1.5 hours
- Standby time: about 150 hours
- Usage time: Keep playing music for about 10 hours (50% volume)
Dongguan SIVGA Electronic Technology Co.,Ltd.Add:JuHui E Valley High-tech
Industrial Zone, Jinfu 2nd Road, Tangchun Village,Liaobu Town,
Dongguan,Guangdong 523000,China.
www.sivgaaudio.com
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.