REVOLVE RVPO1001 Pizza Oven User Manual

REVOLVE RVPO1001 Pizza Oven

MORE INFORMATION

Manufacturer| Northwest Sourcing Asia Limited| CE| 2575-23

Pin 2575XXXXXXX

0359-23

Pin 0359XXXXXXX

---|---|---|---
Address| 11D, E Tat Factory Building,4 Heung Yip Road, Wong ChukHang, Aberdeen, Southern District, Hong Kong
Appliance Name| Outdoor Gas Pizza Oven
Model No.| RVPO1002
Appliance Category| I 3+(28-30/37)0| I 3B/P(30)0| 13B/P(37) 0| 13B/P(50) 0
Country Code| BE,CH,CY,CZ,ES,FR,GB,GR,IE,

IT,LT,LU,LV,PT,SK,SI.

| AL, CY, DK,EE,FR,Fl,HU,IT,LT,NL,NO,SE,SI, SK,RO,HR,TR,BG,IS,LU,MT,CZ|

PL

|

AT,CH,CZ,DE,SK

Type of Gas| Butane| Propane| Butane, Propane or their mixture| Butane, Propane or their mixture| Butane, Propane or their mixture
Gas Pressure| 28-30mbar| 37mbar| 30mbar| 37mbar| 50mbar
Total Heat Input| lQn=| kW(  g/h)|  | Serial No:

&CAUTION:

| ·use outdoors only. •Do not move the appliance during use.

“Read the instructions before using the appliance.                 •This appliance must be kept away from flammable materials during use.

·warning: Accessible parts may be very hot. Keep away from young children. MADE IN CHINA

WARNINGS

• Before you assemble or operate this unit, please carefully read this entire manual. Failure to do so may result in a fire, explosion, injury or death. The product should only be installed and used according to the ways described in this  manual. Children should not engage in the operation, assembly, removal or disassembly of the product.
• To reduce the risk of fire, burn hazard or other injury, read this safety manual carefully and completely before using this appliance.
• Before cleaning, make sure the gas supply and control knob is in the OFF position and that the burner and oven has cooled.
• Never operate this appliance unattended. If a fire should occur, keep away from the appliance and immediately call your fire department. Do not attempt to extinguish an oil or a grease fire with water.
• Failure to follow these instructions could result in fire, explosion or burn hazard which could cause property damage, personal injury or death.
• Use in a well-ventilated location.

WARNING

If you smell gas:

• Shut off gas to the appliance
• Extinguish any open flame
• If odour continues, keep away from the appliance and immediately call your gas supplier or your fire department.

WARNING

• Keep the fuel supply hose away from any heated surface(s).
• The use of alcohol, prescription or non-prescription drugs may impair the consumer’s ability to properly assemble or safely operate the appliance.
• Keep children and pets away from the appliance at all times.
• Do not move the appliance when in use.
• This appliance is not intended for and should never be used as a heater.

WARNING
Do not smoke while leak testing. Never leak test with an open flame.

WARNING
When lighting, keep your face and hands as far away from the appliance as possible.

WARNING
Minimum clearance from sides of unit to combustible construction is 610mm (24 inches).

WARNING

• When using a match to light the appliance, use a matchstick holder.
• Do not store this appliance indoors unless the gas cylinder is disconnected.
• Do not store gas cylinder in a building, garage or any other enclosed area and keep out of reach of children at all times.
• This appliance is not intended to be installed in or on recreational vehicles and/or boats.
• Check all gas supply fittings for leaks before each use. Do not use the appliance until all connections have been checked and do not leak.
• This appliance must be kept away from flammable materials during use.
• Turn off the gas supply at the gas cylinder after use.
• Do not modify the appliance.
• Spiders and insects can nest inside the burner of the appliance and disrupt gas flow. Inspect the burner at least once a year.

IMPORTANT

• The parts which have been sealed by the manufacturer should not be adjusted by the user
• When the appliance is using LPG A LPG cylinder should be used
• The LPG cylinder size: max diameter 350 mm/ 13.77 inch, max height 400 mm/ 15.74 inch.
• The minimum distances between the appliance and adjacent walls is 50 cm/ 20 inch
• The hose for the appliance should not exceed 1.5 m / 59 inch
• The appliance should be installed in a suitably ventilated room. Permanent supply of fresh air is ensured and there is no accumulation of unburned gases
• The gas supply tubing or hose shall comply with the national requirements in force and shall be periodically examined and replaced as necessary.
• The hose should comply with the standard EN16436. The regulator should comply with the standard EN16129.
• The hose and regulator assembly may not be provided with the appliance in some regions.
• Check and suitably clean the inside of the oven before it is lit in order to avoid the emission of fire from the oils that have  accumulated during previous cooking. The burner outlets should be checked for obstruction during previous cooking.
• The burner outlets should be checked for obstruction and cleaned regularly with a soft wire brush.
• It is necessary to avoid obstruction and to allow for a good combustion

GAS SAFETY

• Inspect the gas supply hose prior to turning on the gas.
• If there is evidence of cut, wear or abrasion, it must be replaced prior to use.
• Attach the regulator onto the gas cylinder.
• Leak check the hose and regulator connections with a soap and water solution before lighting the appliance.

LP GAS CYLINDER WARNING

• Do not store spare liquid propane gas cylinder under or near this appliance.
• Never fill the cylinder beyond 80 percent capacity.
• Liquid propane cylinder must be fitted with an OVERFILL PROTECTION DEVICE (OPD).
• If the information above is not followed exactly, a fire resulting in death or serious injury may occur.

SAFETY PRACTISES

When using this oven basic practices must be followed, including but not limited to the following:

• Do not repair or replace any part of the oven unless specifically recommended in this manual. All other service should be referred to a qualified technician.
• Children should not be left alone or unattended in an area where the oven is being used. Do not allow children to sit, stand or play around the oven at any time.
• Never let clothing or other flammables come in contact with or too close to any burner or hot surface until it has cooled. The fabric could ignite, causing serious personal injury.
• For personal safety, wear proper apparel. Loose fittings garments or sleeves should never be worn while using the oven. Some synthetic fabrics are highly flammable and should not be worn while cooking.
• Do not heat unopened food containers as a buildup of pressure may cause the containers to burst. When lighting the burner, always pay close attention to what you are doing.
• When using the oven, do not touch the outer shell, stone baking board or immediate surroundings as these areas become extremely hot and could cause burns.
• Do not use the oven to cook extremely fatty meats or other products which increase flare-up.
• Keep the area surrounding the oven free from combustible material including fluids, trash and vapours such as gasoline or charcoal lighter fluid.
• Do not obstruct the flow of combustion and ventilation air.
• Never use the oven in extremely windy conditions.
• The temperature under the oven is high. Do not place the oven on a table with flammable table cloths, plastic or any other flammable materials.

PARTS LIST

1. Oven
2. Pizza Stones (3pcs + 1 spare)
3. Motor
4. AA Batteries (3pcs)
5. Rain Cover Carry Bag
6. Stainless Steel Pizza Peel

OPENING THE LEGS

• Fold the legs fully open.

INSTALLING THE STONES

Carefully insert the cordierite stones into the oven. Start with the first smaller stone by pushing it all the way into the back of the oven until it reached the end and fits securely on the base. Next, instal the large round stone into the round metal plate. Finish by inserting the other smaller stone into the front. It should fit securely on the base. All the stones should sit level with each other.

INSTALLING THE MOTOR

The motor for the rotating pizza stone is installed at the bottom of the oven. The motor attaches with magnets. Follow these steps to instal it correctly:

• STEP 1: Make sure the switch on the motor is OFF and the axle does not rotate.
• STEP 2: Install the batteries (3 x AA) into the battery compartment.
• STEP 3: Identify the mounting plate for the motor located at the bottom of the oven (A).
• STEP 4: Bring the motor (C) against the mounting plate and align the corners with each other. You can feel the magnets pulling the motor firmly against the mounting plate. Make sure the motor sits evenly and the ON/ OFF switch faces the front of the oven.
• STEPS 5: Turn the motor ON and make sure that the round stone is rotating.

NOTE! The axle of the oven (BJ has to align with the axle on the motor (CJ. Sometimes you will have to rotate the motor side to side to find the right alignment. Correctly installed motor will sit evenly and securely against the mounting plate.

IMPORTANT

• Remove batteries when the oven is not used for a longer period of time.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

CONNECTING THE GAS HOSE

Connecting gas hose directly to Revolve oven
The gas hose is typically factory installed depending on your country. If it is, proceed to Checking for leaks.

Connecting barb to Revolve oven

IMPORTANT
For other connection types, please consult your local distributor or dealer.

IMPORTANT

Checking for leaks
Leak check the hose and regulator connections with a soap and water solution before lighting the appliance.

CONNECTING TO GAS TANK

Connect the Regulator to the Cylinder

1. Check that the oven burner valve is OFF.
2. Identify your regulator type and connect the regulator to the LPG cylinder by following the appropriate connection instructions.
3. Screw-in regulators:

  *  **STEP 1:** Confirm that the LPG cylinder valve or regulator lever are closed before connecting.
  *  **STEP 2:** Screw the regulator as far as possible into the gas tank valve.
2. Push-in regulators:

• STEP 1: Confirm that the LPG cylinder valve or regulator lever are closed before connecting.
• STEP 2: Push the regulator down on the gas tank valve (slide-collar up on the models with collar) until regulator snaps into position.
• STEP 3: Make sure the regulator is securely connected to the gas tank before opening the gas valve.
• NOTE! The regulator illustrations shown in this manual may not be similar to the regulator you are using for your grill, due to different country or regional regulations.
• NOTE! Before lighting the oven, use a soap and water solution to check all connections for leaks. If a leak is found, turn the cylinder valve OFF, and do not use the oven until local liquid propane dealer can make repairs.

WARNING
Fire product and propane gas cylinder minimum distance must be over 51cm / 20in

WARNING
Do not store or use gasoline or other flammable vapors and liquids, including LP tanks not being used in the vicinity of this product.

WARNING
Do not use the heating unit without inspecting the gas hose. If there are signs of wear or abrasion you must replace the hose (if applicable).

LEAK TESTING

Checking for leaks
Before performing a leak test, be sure that no sparks can occur and you are in a spacious outdoor area.

• STEP 1: You can make your own soap and water solution by mixing 20% liquid soap with 80% water; or.you can purchase leak check solution in the plumbing section of most hardware stores.
• STEP 2: Make sure control knob (Fl is in the “OFF” position
• STEP 3 : Connect LP gas tank
• STEP 4: Turn LP gas tank valve to “open”
• STEP 5: Wet fittings (marked with “X) with a soap and water solution using a spray bottle, brush, or rag;
  • If any bubbles appear, turn LP gas tank valve to “CLOSED”, reconnect and re-rest;
  • If you continue to see bubbles after several attempts turn LP gas tank valve to “CLOSED” and disconnect LP gas tank, turn the gas valve off, disconnect propane tank and do not use the product until the leak is repaired
  • If no bubbles appear after one minute, turn LPgas tank valve to “CLOSED” and wipe off any remaining soap and water solution.
• DANGER: Do not use a flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks.
• DANGER: Leaking gas may cause a fire or explosion. Do not operate the oven if there is a gas leak present If you see, smell, or hear the hiss of gas escaping from the LPG cylinder:

1. Move away from LPG cylinder.
2. Do not attempt to correct the problem yourself.
3. Call the emergency fire services.

• DANGER: Always close the cylinder valve before disconnecting the regulator. Do not attempt to disconnect the gas regulator and hose assembly or any gas fitting while this oven is in operation.
• DANGER: Do not store a spare LPG cylinder under or near this oven.
• DANGER: Never fill the cylinder beyond 80% full. Failure to follow these statements exactly may result in a fire causing death or serious injury.

OPERATING INSTRUCTIONS

Using the oven
To light the oven:

1. Make sure the oven has been leak tested and properly assembled.
2. Remove any remaining packing material.
3. Light the burner using the STEPS below.

Lighting instructions

• STEP 1: Make sure the control knob is in OFF position.
• STEP 2: Turn ON the valve on your gas tank
• STEP 3: Push in the control knob and slowly turn the knob anticlockwise to HIGH until you hear a click and the burner ignites. Keep holding the knob down for 5 more seconds before releasing the knob. If burner doesn’t light, turn the knob OFF, wait for 5 minutes and repeat the steps above.

Adjusting the flame
Adjust the flame height by turning the knob anticlockwise (low flame) and clockwise (high flame)

Lighting with a match
If the control knob does not ignite the burner after several attemps, you can use a match to light the burner. Please allow 5 minutes for the gas to dissipate before trying the match method below:

• STEP 1: Insert a match into a matchstick* holder, ignite the match and insert through the oven opening to the burner.
• STEP 2: Push and turn the control knob to HIGH slowly, the burner should ignite immediately.
• STEP 3: If the burner does not light within seconds, turn the control knob OFF and wait 5 minutes and try again.
  • Matchstick holder included with the oven only for the USA/ Canada version.

CARE AND MAINTENANCE

Good to know

• Keep your oven out of direct sunlight and store indoors if possible, when not in use.
• Always let your oven cool down completely before moving it to storage or covering it with the soft cover.
• It is not recommended to use the oven in harsh weather conditions such as snow, heavy rain or strong winds.
• You can wipe the outside surfaces of the oven clean with a damp cloth and a mild washing solution.

Pizza stone

• It is natural for the stone to get dirty in use. Best way to clean it is to turn the oven at full flame and let the stone burn off any dirt and food residue. The stone should look clean after approx. 30mins of burning the oven.

1. DO NOT use the stone over an open flame
2. Avoid extreme temperature change to the stone. DO NOT place frozen foods on a hot stone
3. The stone is fragile and can break if bumped or dropped
4. The stone is very hot during use and stays hot for a long time after use.
5. DO NOT cool the stone with water when the stone is hot.
6. After cleaning the stone with water, please dry the stone before use. This can be done in a conventional oven at 60’C (140’F) for 2 hours.

TROUBLESHOOTING

2.   Coupling nut and regulator not fully connected

3.   Obstruction of gas flow

4.   Disengagement of burner to valve

5.   Incorrect assembly

| 1.   Check to see if propane tank is empty

2.   Turn the coupling nut about one-half to three quarters additional turn until solid stop. Tighten by hand only- do not use tools

3.   Clear burner tube

4.   Reengage burner and valve

5.   Check steps in assembly instructions

Sudden drop in gas flow or low flame| 1. Out of gas| 1.   Check for gas in propane tank

2.   Turn off gas control knob, wait 30 seconds and light oven. If flamesare still low, turn off gas control knob and propane tank valve. Disconnect

regulator. Refill Propane tank.Reconnect regulator and performa leak test.

Turn on propane tank valve, wait 30 seconds and then light oven.

Flames blow out| 1.   High or gusting winds

2.   Low on propane gas

| 1.   Turn front of oven away from wind

2.   Refill propane tank

3.   Refer to Sudden drop in gas flow above

Flare-up| 1.   Grease build up

2.   Excessive fat i n meat

3.   Excessive cooking temperature

4. Excess flour on the cooking surface

| 1.   Clean oven

2.   Trim fats from meat before cooking

3.   Adjust (lower) temperature accordingly

4.   Brush remnant flour from cooking surface

5. Flip stone

Flashback (fire in burner tube, roaring sound from burner)| 1.   Burner and/or burner tubes are blocked

2.   Pressure drop during ingition

| 1.   Turn gas control knob off. Clean burner and/or burner tubes.

2.   Turn off oven, ensure thetank valve is fully open (if applicable) and relight.

The revolving center stone doesnot turn.| 1. Motor switch on the bottom of the oven is OFF.

2. Motor has run out of batteries.

3.  The wingnut connecting the metal plateto the axle is loose.

| 1. Turn theswitch on the motor to ON.

2. Install new batteries on the battery compartment of the motor.

3. Carefully remove the stone and tighten the wingnut on the metal plate.

Customer service
For customer service, technical information and replacement parts contact us by email: revolvesupport@nwsourcing.com

• Visit our website for more information: www.revolvepizzaovens.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>