COLOER COS802A Dimmable LED Step Light User Manual

: June 14, 2024
: COLOER

Table of Contents

COLOER COS802A Dimmable LED Step Light
HIGH FEATURE
PRODUCT DIMENSIONS
SPECIFICATIONS
UNPACKING CHECK
PRODUCT DIAGRAM
FIXTURE INSTALLATION
TROUBLESHOOTING
CLEANING AND MAINTENANCE
WARRANTY
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COLOER COS802A Dimmable LED Step Light

HIGH FEATURE

Die-cast aluminium lighting body
Input 120V AC 50/60Hz
Frosted PC lens
ETL listed
Design for standard United States junction box
ORB colours body finishing
CCT:3000K
Suitable for Wet location
Easy Installation
Save energy

PRODUCT DIMENSIONS

SPECIFICATIONS

Model No: COS802A
Wattage: 3.5W
Voltage: 120VAC/60Hz
LED Type: SMD2835
Lumens: 651m(ORB)
Colour Temp: 3000K
CRI: >90
Product weight: 0.41lbs
Beam Angle: 40°
Lifespan: 50,000hrs
Working temp: -4°F-104°F
Body Material: Aluminum
Lens Material: PC
Cable Material: Copper
Wet Location: IP65

PHOTOMATRIC

UNPACKING CHECK

Please check and make sure that there are no signs of physical damage to the product when unpacking. DO NOT use damaged products.

WARNING

All electrical connections must be made under local and National Electrical Code(N.E.C.)standards.
ONLY use UL or IEC-approved wires for the input/output connections.
Due to the risk of fire or electrical shock. the installation of this product requires knowledge of the electrical systems. If NO qualified. DO NOT attempt the installation and contact qualified electrician.
TURN OFF THE POWER before beginning the installation. inspection or removal.
Use ALL necessary precautions while performing this procedure.
THE OUTLET BOX MUST BE PROPERLY

GROUNDED

DO NOT REVERSE THE LIVE AND NEUTRAL CONNECTIONS, OTHERWISE
SAFETY WILL BE COMPROMISED
The outlet box must be recessed in the wall and cannot be protruding from the wall.

NOTE: This is an integrated LED fixture, there are no bulbs to replace.

PRODUCT DIAGRAM

Outlet box(NOT INCLUDED)
Mounting screws
Mounting bracket
Wire nuts
Face plate
Fixture wires
White fixture wire
Black fixture wire
Green fixture wire
Supply wires
Neutral wire
Live wire
Ground wire

FIXTURE INSTALLATION

Step 1. Pull the power supply wires (7) out from the outlet box(1). Mount the mounting bracket (3)to the outlet box using the mounting screws (2).
Step 2. Use the wire nuts(4)to connect the fixture wires (6)to the power supply wires(7). (white-neutral, Black-live, Green-ground). Carefully tuck the wires inside the outlet box(1)
Step 3. Select the colour temperature from 3000K, 4000K, and 5000K with the toggle switch.
Step 4. Snap the face plate(5)onto the fixture
Step 5. Use sealant (not included), to fill the gap between the face plate (5)and the outlet box (1) to improve the water resistance.

DIMMING

This product is compatible with most common residential-type dimmers. The dimming performance will depend upon dimmer, dimmer settings (dimmers with adjustments to brightness range), wiring method, and the number of LED modules.
For best results, set the dimmer position at maximum before adjusting to a lower light level.
The following dimmers are recommended:
Lutron DV-600P,Lutron PD-6WCL, Lutron MACL-153M,Lutron-603p;
Leviton DSL06,Leviton RNL06.

TROUBLESHOOTING

If the fixture does not light:

Check the power to see if it is on.
Check STEP2 of the fixture installation, and make sure that all wire connections are connected property.
Check to see if the fixture is properly grounded.
Check the switch to ensure that there aren’t any defects.
Check the fuse/circuit breaker for trips.

CLEANING AND MAINTENANCE

CAUTION

Ensure that the fixture’s temperature is cool enough to touch. DO NOT clean or perform maintenance while the fixture is energized.
Clean the lens and fixture with a non-abrasive cleaning solution.
DO NOT open the fixture to clean the LED bulb. DO NOT TOUCH THE LED BULB WHEN IT HOT.
DO NOT SPRAY LIQUID DIRECTLY ON TO THE LEDS, LED driver or the wiring.

WARRANTY

5 years warranty
We warrant this light fixture against defects in material and workmanship for a lifetime from the date of purchase. If within this period the product is found to be defective in material or workmanship, this product must be returned with a copy of the receipt as proof of purchase to the original place of purchase. The retailer will, at its option, repair, replace, or refund the purchase price to the original purchaser. Warranty does not include damages due to misuse, accidents, improper handling and /or installation, incidental, or consequential damages. As some states do not allow exclusions or limitations on the implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights and you may also have other rights that vary from state to state.