BLACK DECKER FP4100B 3 In 1 8 Cup Food Processor User Manual
- June 14, 2024
- Black Decker
Table of Contents
BLACK DECKER FP4100B 3 In 1 8 Cup Food Processor
PARTS AND FEATURES
-
Workbowl cover
(Part # 2050201951) -
Slicing/shredding disc
(Part # 2050201481) -
Chopping blade
(Part # 2050201301) -
Center shaft
(Part # 2050201311) -
Workbowl
(Part # 2050201491) -
Control panel
-
Food pusher
(Part # 20102000003802) -
Feed chute
-
Handle
-
Base
The product may vary slightly from what is illustrated.
GETTING STARTED
- Remove all packing material, any stickers, and plastic bands around the power plug.
- Remove and save literature.
- Please go to www.prodprotect.com/blackanddecker to register your warranty.
- Wash all removable parts.
CAUTION: Handle the blade and disc carefully. They are very sharp.
- Select a level, dry countertop where the appliance is to be used allowing air space on all sides to provide proper ventilation for the motor.
Important: Always make sure your food processor is unplugged and placed
on a flat, level surface before starting to assemble.
Important: For your protection this appliance has an interlock system.
The processor will not operate unless the cover is properly locked in place.
Caution: Never use your fingers to direct food through the feed chute.
Important: Make sure the chopping blade or slicing/shredding disc has
completely stopped before removing the cover or work bowl from the processor.
Note: Remove the work bowl from the appliance before removing the
chopping blade to prevent food from leaking through the center opening of the
work bowl.
- Do not use the processor to:
- Grind coffee beans, bones, grains, or hard spices
- Slice or chop warm meat
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
- Read all instructions.
- To protect against the risk of electrical shock, do not put a food processor base, cord or plug in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Turn the appliance OFF then unplug it from the outlet when not in use, before putting on or taking off parts, and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
- Avoid contacting blades and moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. Contact the consumer service number listed in this manual. This appliance has important markings on the plug blade. The attachment plug or entire corset is not suitable for replacement. If damaged, the appliance must be replaced.
- The use of attachments not recommended by the appliance manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
- Keep hands and utensils out of the container while processing to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the processor is not running.
- Never feed food by hand. Always use a food pusher.
- Blades are sharp. Handle carefully.
- To reduce the risk of injury, never place blades or discs on the base without first putting the work bowl properly in place.
- Be certain the work bowl cover is securely locked in place before operating the appliance.
- This appliance has a protection system. The unit will not operate unless the work bowl is on the base and the work bowl cover is securely locked onto the work bowl.
- Do not place on or near a hot gas or electric burner or in a heated oven.
- Do not attempt to defeat the lid interlock mechanism.
- Do not fill the bowl above the marked maximum fill line to avoid the risk of injury due to damage to the cover or bowl.
- Do not use the appliances for other than intended use.
- This product is designed for household use only.
- Do not open the lid until the blade or disc stops completely.
- The maximum rated wattage for this product was obtained with the chopping blade.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Note: Processing items with low moisture content may dull the finish of the bowl.
SAVE THESE INSTRUCTIONS
This product is for household use only.
POLARIZED PLUG (120V models only)
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to
prevent removal of the outer cover. Do not attempt to remove the outer cover
to reduce the risk of fire or electric shock. There are no user-serviceable
parts inside. Repair should be done only by authorized service personnel.
ELECTRICAL CORD
- A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.
- Extension cords are available and may be used if care is exercised in their use.
- If an extension cord is used:
- The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance;
- If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord; and
- The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.
Note: If the power cord is damaged, please contact the warranty department listed in these instructions.
HOW TO USE
- With the unit unplugged from the outlet, place the work bowl on the base and put the centre shaft in the workbowl.
Select tool
-
Shredding the side of the disc
-
Slicing side of the disc
-
Chopping blade
-
Place either the chopping blade or the slicing/shredding disc onto the centre shaft.
-
Make sure the unit is OFF and plug the processor into an outlet.
If using a chopping blade : put food into the work bowl below the max food level. Place cover on work bowl as shown and rotate clockwise. Put the food pusher in place.
- To puree: Press the LOW or HIGH button and press OFF when done.
- To chop: press the PULSE button ((P)) for short bursts.
- If using a disc: place the cover on the work bowl as shown and rotate clockwise. Place food in the feed chute.
- Press the LOW button. Gently guide food through a tube with a pusher. Press OFF when done.
WHAT SPEED T O USE
GENERAL TIPS F OR USING THE PROCESS SOR
- Organize processing tasks to avoid multiple cleanups of the bowl; process dry before wet.
- Do not process foods that are so frozen or hard that the tip of a knife cannot be inserted into the food.
- If a piece of hard food, such as a carrot, becomes wedged or stuck on the blade, stop the processor and unplug, then remove the blade. Gently remove food from the blade.
- Meat and cheese should be well chilled before slicing or shredding
TIPS F OR USING THE CHOPPING BLADE
- The processor works very quickly. Watch carefully to avoid overprocessing foods.
- For best results, process foods that are about the same size.
- The processor will be more efficient if filled no more than 1/2 to 2/3 full.
- Processing nuts or other hard foods may scratch the surface finish on the inside of the bowl.
- Never walk away from the processor while it is on.
- Use hot, but never boiling liquids.
- The PULSE feature offers the best control.
TIPS F OR SLICING OR SHREDDING
- Before slicing round fruits and vegetables through the processor cut a thin slice from the bottom so the food will be more stable. Place food cut side down in the feed chute.
- Always remove seeds, core and pits before processing
- Select foods that are firm and not over-ripe.
- When slicing thinner vegetables cut them just short of the length of the feed chute; stand them vertically in the feed chute so they are solidly packed and cannot turn or tilt.
- Soft and semi-hard cheeses should be well chilled before shredding.
- Do not let the food accumulate too high (over 2/3 full); stop and empty the workbowl.
CARE AND CLEANING
Important: Always unplug your processor from the outlet before cleaning.
CLEANING
- Completely disassemble processor parts before washing.
- Rinse parts immediately after processing for easier cleaning.
- Wipe base and feet with a damp cloth and dry thoroughly. Do not immerse the base in liquid.
- All removable parts can be washed by hand in hot water with dish soap or in the dishwasher, top rack only. Hand-washing of plastic parts will help to maintain the food processor’s appearance.
- Do not use rough scouring pads or cleansers on any plastic or metal parts to clean.
- Do not allow the blade or disc to soak in water for long periods.
- Remember to clean the internal shaft of the chopping blade. Use a brush to remove any residual food particles.
TROUBLESHOOTING
PROBLEM SOLUTION
Food Processor doesn’t run| • Make sure the workbowl and workbowl cover is properly aligned and in place.
• Check to make sure the food processor is plugged in.
• If you have a circuit breaker box, be sure the circuit is closed.
• Unplug the food processor, and then plug it back into the outlet.
The food processor no shredding or slicing properly| • Make sure the disc or blade is installed properly.
• Make sure ingredients are suitable for slicing or shredding.
If workbowl cover won’t close| • Make sure the disc or blade is
installed correctly.
If the problem is not due to one of the above items, see the “Warranty and
Service” section of this Use and Care Manual. Do not return the food processor
to the retailer. Retailers do not provide service.
STORAGE
Caution: Blades and discs are sharp. Handle carefully.
- Wrap cord under base.
- There are two ways to store your food processor.
- (Fig. 7) Assemble the parts onto the base in this order: workbowl, center shaft, chopping blade, slicing/ shredding disc, workbowl cover, food pusher.
- (Figs. 8-11) To save space: put the workbowl onto the base. Put in the chopping blade first and then at a diagonal angle, the center shaft (Fig. 8).
- Turn workbowl cover upside down and nestle on top of workbowl (Fig. 9). Insert the food pusher into the feed chute (Fig. 10). Place the slicing/ shredding disc on top (Fig. 11).
Need Help?
For service, repair or any questions regarding your appliance, please call our
Customer Service Line at
1-800-465-6070. Please DO NOT return
the product to the place of purchase. Also, please DO NOT mail product back to
manufacturer, nor bring it to a service center. You may also want to consult
the website listed on the cover of this pamphlet.
Warranty Information
(Applies only in the United States and Canada)
What does it cover?
- Any defect in material or workmanship provided; however, Spectrum Brands’ liability will not exceed the purchase price of product.
For how long?
- Two years from the date of original purchase with proof of such purchase.
What will we do to help you?
- Provide you with a reasonably similar replacement product that is either new or factory refurbished.
How do you get service?
- Save your receipt as proof of date of sale.
- Visit the online service website at www.prodprotect.com/blackanddecker, or call toll-free 1-800-465-6070, for general warranty service.
- If you need parts or accessories, please call 1-800-738-0245.
How does state law relate to this warranty?
- This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.
What does your warranty not cover?
- Damage from commercial use
- Damage from misuse, abuse or neglect
- Products that have been modified in any way
- Products used or serviced outside the country of purchase
- Glass parts and other accessory items that are packed with the unit
- Shipping and handling costs associated with the replacement of the unit
- Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)
Are there additional warranty exclusions?
This warranty shall not be valid where it is contrary to U.S. and other
applicable laws, or where the warranty would be prohibited under any economic
sanctions, export control laws, embargos, or other restrictive trade measures
enforced by the United States or other applicable jurisdictions. This
includes, without limitation, any warranty claims implicating parties from, or
otherwise located in, Cuba, Iran, North Korea, Syria and the disputed Crimea
region.
-
At the end of this product’s life, you can mail it to Spectrum Brands at 507 Stokely Drive, Deforest, WI 53532 marked “Product Takeback: Please Recycle!” À la fin de la durée utile de ce produit, vous pouvez le poster à Spectrum Brands au 507 Stokely Drive, Deforest, WI 53532 en indiquant sur la boîte
« Product Takeback: Please Recycle! -
450W 120V 60Hz
BLACK BEAN HUMMUS
- Total Time: 5 minutes
- Servings: 7
- Serving Size: ¼ cup
Ingredients
- 1 (15 oz) can black beans, drained and rinsed
- 2 Tbsp. fresh lime juice
- ¼ cup tahini
- ¼ cup olive oil
- 1 Tbsp. minced garlic
- 2 tsp. cumin
- ½ tsp. chili powder
- 2 Tbsp. cilantro
- ½ tsp. salt
- 1/8 tsp. pepper
- ½ small yellow onion
Directions
- Add all ingredients into the food processor workbowl. Process on High for about 1 minute until the hummus is a smooth consistency.
- Serve with your favorite chips or crackers.
BLACK+DECKER and the BLACK+DECKER logos are trademarks of The Black & Decker
Corporation, used under license by Spectrum Brands, Inc. for its manufacturing
and sale of this product. All rights reserved. .
© 2020 The Black & Decker Corporation and Spectrum Brands, Inc., Middleton, WI
53562 All rights reserved.
CONTACT
- Customer Care Line: 1-800-465-6070
- For online customer service:
- www.prodprotect.com/blackanddecker.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>