PETECHTOOL 8P8C Color Code Instruction Manual

PETECHTOOL 8P8C Color Code

RJ45 color code

1. White Green

2. Green

3. White Orange

4. Blue

5. White Blue

6. Orange

7. White Brown

8. Brown

9. White Orange

10. Orange

11. White Green

12.  Blue

13. White Blue

14. Green

15. White Brown

16. Brown

How to make an Ethernet cable

1. Arrange the ethernet cable, plug ,crimp tool and the strain relief boot.
2. Put the boot into the cable if you have the boot.
3. Strip off the skin of the network cable.
4. Remove the skin off.
5. Separate the twisted pair and straighten it.
6. Arrange the wires according to the rj45 color ”T568B”
7. Trim the network cable neatly to make it easier to perforate.
8. Pass the wires thru the connector and Perform sequence verification again
9. Put the plug into the tooland confirm push to the buttom.
10. Crimp the plug.
11. Finish.
12. lf you have the boot,you need to push it off like this photo,then finish.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>