Amaze Heater 250SS Ceramic Electric Wall Mounted Room Heater Instruction Manual

Amaze Heater 250SS Ceramic Electric Wall Mounted Room Heater

• Thank you for purchasing the “Amaze-heater” Wall Mounted Convective Panel Heater. you are on your way to enjoying the amazing heat in the room of your choice without having to heat the whole house and thereby saving money (up to 50%) on your home heating costs.
• Heater is a product engineered for efficiency, safety and longevity. The panels are manufactured to resist humidity throughout their lifetime. Insulation and thermal movement are taken care of by using special flexible encapsulating resins.
• Heaters have an optional feature of a separate heat barrier which is installed on the wall behind the panel, thereby greatly reducing the heat loss through the wall. Consequently, the efficiency of the panel is improved, heating the room quicker while attaining a higher room temperature for the same electrical rating.
• The product may exhibit a mild smell due to surface moisture during the initial period of consistent operation.
• Please Keep in mind that this is normal and your heating panel has no detectable VOCs and is compliant with all required safety standards.
• If you have chosen our exclusive “Amaze Heat Guard” Please use CAUTION when using this product near toddlers. For all others, the product will be hot to the touch when in operation but will not cause bums.
• You can purchase the “Amaze -Heat Guard” which covers the hot surfaces, provides secondary air convection currents and renders the unit easy to decorate, please contact Amaze Customer Service.

Operating and General Instructions

• And things you should know about AMAZE – HEATER
• Please read in conjunction with installation Instructions Heaters incorporate the latest design, technology and materials, to give safe, comfortable, healthy and economical constant ambient warmth. They are not designed to compete with high-wattage fan-forced heaters.
• Heaters are designed to be used for long periods at extremely low running costs. As a rule of thumb, a 400-watt Amaze -Heater is considered adequate for a 124 sq. ft. (11.15m2) room.
• Heater surfaces operate at a safe, even temperature, providing some radiant heat from the panel but providing most heat by convection currents that rise from behind the panel and circulate heated air around the room, simultaneously drawing and heating the cold air form the floor area.
• Heaters are ideal for all rooms, including children’s rooms and areas frequented by pets. Asthma and dust allergy sufferers can enjoy warmth without irritation because the air is not dried out, nor is dust circulated in the room.
• Heaters are not limited to residential applications. Their benefits and advantages are applicable in commercial and industrial applications as well.
• Heaters can be painted with no-odor water-based paint of any colour to match or enhance the decor of a room. Please read the disclaimer statement below.
• Heaters like all heating appliances; are not intended to be operated by young children or infirm persons unless- they are adequately supervised or instructed by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the heater.
• The heater should not be positioned within 50mm (2″) of furniture or other objects that may be heat-sensitive.
• Ideally, this heater should be installed not more than 12″ (300mm) above floor level. However, higher locations can also be utilised but heaters efficiency will be reduced. For maximum efficiency do not install under windows or near open doors.
• Heaters are for wall mounting only and to avoid electric wiring embedded in walls, should not be mounted directly above, below, or covering electric socket- outlets.
• This warning symbol on an electrical appliance indicates that the Appliance MUST NOT BE COVERED.
• The heater must not be drilled and only the provided fixing holes should be used for mounting.
• Do not omit or modify Amaze -Heater mounting legs.
• If supply cords or plugs become damaged, they must be replaced by the manufacturer, its service agents or a similarly qualified person, in orderto avoid a hazard.
• Heaters have passed international standards and are covered by a 3 3-year warranty subject to compliance with Installation and Operating Instructions.
• Disclaimer: Application of paint or decoration of the heating panel is at the purchaser’s discretion and risk.
• The manufacturer’s or seller’s dissociation from such application precludes them from any liability, responsibility or acceptance of any claims.

Important Safety Instructions

1. Read all instructions before using this heater.
2. This heater is hot when in use (about 185° F). Touch with bare skin will cause discomfort. However, due to the non-conducing materials used, it will NOT cause burns.
3. Extreme caution is necessary when any heater is used near children or the elderly, and whenever the heater is left operating and unattended
4. Always unplug the heater when not in use.
5. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, or has been dropped or damaged in any manner.
6. Do not use the heater outdoors.
7. Except for IP44-rated panel heaters, this heater is not intended for use in bathrooms, laundry areas and similar indoor locations where a person might be in contact with water and can operate the unit at the same time. Never locate the heater where it may fall into a bathtub or other water container.
8. To avoid electrical shock do not turn the heater off while you are standing in water or when your hands are in water.
9. Do not run the cord under carpeting, Do not cover the cord with throw rugs, runners, or similar coverings, Arrange the cord in such a manner that it will not be tripped over.
10. To disconnect the heater, turn the switch off, then remove the plug from the outlet. Pull only by the p I u g . Do not pull on the cord when disconnecting it.
11. These heaters are for wall mounting only, and should under no circumstances be used as free-standing heaters.
12. Before drilling into the wall, check that the area is free of electric wiring and pipes embedded in the wall.
13. The heater must not cover, or be mounted immediately below a power outlet, or overheating of the outlet may occur.
14. Some wallpaper glues may not be resilient to elevated temperatures so it is advisable to test the wallpaper first to avoid damage.
15. The heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or other flammable liquids are used or stored.
16. HEATERS HAVE NO USER-SERVICEABLE PARTS INSIDE and should only be opened by an authorized agent.
17. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire, However, you have to use an extension cord, if the cord shall be No. 18 AWG minimum size and rated not less than 530 watts. If an extension cord must be used it should be rated at not less than 10Amps.
18. Use this heater only as described in this manual, Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
19. WARNING: To avoid overheating, DO NOT COVER HEATER WITH ANYTHING, including clothing or any other materials.
20. SAVE THESE INSTRUCTIONS.

Limited Warranty

• AMAZE -Heaters Electric panel Heaters are warranted against defects in Workmanship and material for three (3) Years from the date of purchase. This warranty does not apply if damage or malfunction occurs da thorid ears make attempts improvisations: slaton of wing an or per ation win connected voltage more than 5% greater than the nameplate voltage.
• In the rare instance that a heater develops very minor hairline cracks, this will NOT normally be considered a warrantable item. If this does occur, the Safety and performance of the heater will not be affected by cosmetic defects.
• The customer shall be responsible for all costs incurred in the removal or reinstallation of the products, including but not limited to labour costs and shipping costs to return the heater to the Amaze-Heaters service centre. Within the limitations of this warranty and at the discretion of the dealer/distributor. We will repair or replace the heater.
• Should repair or your replacement be necessary during the warranty period, contact the dealer or distributor with your proof of purchase for further action.
• DEALER / DISTRIBUTOR SHALL NOT BE LIABLE NOR DOES THIS WARRANTY COVER LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY CAUSE WHATSOEVER, INCLUDING BUT NOT LIMITED TO; NEGLIGENCE, TORT, STRICT LIABILITY OR CONTRACT.

INSTALLATION INSTRUCTIONS

INSTALLATION KIT INCHES

TO INSTALL YOUR HEATER, YOU’LL NEED

• Use the template provided to mark the position of the four holes on your wall Optimally, the bottom of the template is between 4″ and 18″ from the floor.

• Use a 7/32″ drill bit to drill pilot holes for the drywall anchors; however, if you drill into a stud, use a 1/8″ bit and do not use an anchor On a masonry wall, drill 1-1/2″ deep holes. If you use an alternate wall anchor system, follow the manufacturer’s instructions.

• Your heater unit includes mounting hardware for either masonry or drywall installations. If your walls require different hardware, make sure the screw is long enough to accommodate the length of the mounting leg, and that the length of the screw fits in the countersink hole of the mounting leg.

• Use a Phillips head screwdriver to screw the drywall anchor into the pilot hole, For a masonry wall, push the masonry plug into the pilot hole until it is flush with the wall.

• Use the 3″ long screws to secure the four mounting legs to the wall. Make sure the head of the screw is seated in countersink hole of the mounting post.
  DO NOT FINISH TIGHTENING THE FOUR SCREWS UNTIL THE PANEL IS PLACED ON THE LEGS.

• Stick the foil to the wall by locating it approximately in the center of the four mounting holes. Hold the foil by top corners and keep foil taut while applying to the wall.

• When fully applied to the wall, burnish with a soft cloth working outwards from the center and ensuring the edges of the foil are well adhered to the wall.

• Align the holes on the heater unit with the mounting legs. If the holes do not align, the legs must be repositioned. After legs are firmly screwed in, the heater should still be able to slide on the legs. Do not force the heater onto legs. This could cause stress to the heater resulting in cracking when the heater is in use. IGNORING THESE INSTRUCTIONS WILL VOID THE WARRANTY.

• With the heater unit in place, finish tightening the screws. Then tighten the Cap/Nuts over the ends of the four mounting posts to lock the unit in place.

CROSS SECTION OF HEATER INSTALLATION

CONTACT

• Manufactured in India for
• E-mail ID: sales@amazeheaters.com.
• UL Approval No. : 3160553
• CB Approval No.: 023829
• NSW No.: 23449
• Ref. No. AMAZE/SHE/NSW/0100
• Rev.:00

P.S.: Alternate mounting system of panel

• heater: By using Ezy-Mount Stands without drilling
• holes into the wall.
• Please visit our website :
• www.amazeheaters.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>