GILCHRIST SOAMES MB 2023.03.03 Disappearing Mini Bracket Installation Guide
- June 14, 2024
- GILCHRIST SOAMES
Table of Contents
GILCHRIST SOAMES MB 2023.03.03 Disappearing Mini Bracket Installation Guide
FOR ENGINEERING
Fixture Installation Instructions:
To be ADA compliant, mount so the bottle pump is 48” from finished floor.
INSTALLATION KIT INCLUDES:
Reusable installation template, pre-applied 3M double-sided adhesive tape &
key.
SUPPLIES NEEDED:
Universal cleaner/detergent, isopropyl alcohol, silicone sealant, clean/dry
cloths, level, pencil, tape & gloves.
Mount using pre-installed 3M double-sided ADHESIVE TAPE.
If mounting to a surface that has a gel coat finish, treat the mounting area with 3M Tape Primer 94, as per instructions provided with primer.
Refer to the Reusable Installation Template (included) for proper bracket alignment and spacing.
⚠ These steps are CRITICAL for proper adhesion.
“IMPORTANT INFORMATION BEFORE INSTALLING DISPENSER BRACKET SYSTEM”
Please review all operation and installation instructions with your hotel
engineering department and tile and shower wall supplier/manufacturer before
installing dispenser bracket system.
In no event shall Guest Supply be liable for any damages of any sort arising
out of the installation of the dispenser bracket system, whether direct,
indirect, special, incidental, consequential or otherwise.
REMOVING a dispenser installed with 3M ADHESIVE TAPE.
Note: Do not use excessive force to remove the bracket as this may damage the wall.
First remove the silicone bead using a plastic caulk scraper.
A length of high-strength fishing line (or similar material) may be used to
cut through the adhesive bond-line. Use liquid soap as a lubricant. If
necessary, heat the dispenser with a hair dryer to soften the adhesive.
Alternatively, 2 soft plastic putty knives can be used to gently pry the edge
away from the wall, slowly working your way around the perimeter of the
dispenser. If necessary, heat the dispenser with a hair dryer to soften the
adhesive.
FOR HOUSEKEEPING
Bottle Installation & Replacement:
DO NOT USE abrasive cleaning chemicals, abrasive acidic cleaning chemicals or abrasive cleaning sponge or cloth.
IMPORTANT
WAIT AT LEAST 24 HOURS after bracket installation before installing
bottles.
Bracket Operation
These guest room accessories are handcrafted and require special care for long term enjoyment.
CAUTION: DO NOT USE
Abrasive cleaning chemicals
Acidic cleaning chemicals
Abrasive cleaning sponge / cloth
RECOMMENDED CLEANING INSTRUCTIONS
Warranty available upon request.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>