Housemark 1652347 Liam 3 Light LED Bath Vanity Instruction Manual

Housemark 1652347 Liam 3 Light LED Bath Vanity

Product Information
Specifications

• Model: 1652347
• Brand: Liam MR
• Product Type: 3-light vanity Barra para tocador de 3 luces
• Origin: Made in China

Product Usage Instructions
Caution and Important Notes
Before installing the product, please ensure to follow these important safety precautions:

• If using a dimmer, it must be LED compatible.

• Turn off the breaker at the panel to avoid any risk of electrical shock.

• Switch off the main electrical supply from the fuse box/circuit
  breaker before installation or maintenance.

• Do not use the product outdoors.

Installation Steps

1. Turn off the breaker at the panel.
2. Remove the mounting bracket and fasten it onto the junction box using the provided junction box screws.
3. Connect the wires: white wire from the light fixture to the white supply wire, black wire from the light fixture to the black supply wire, and ground wires to the ground screw on the mounting bracket using wire connectors.
4. Mount the light fixture onto the bracket and secure it with support screws.
5. Remove the lamp holder ring for later use.

FAQ (Frequently Asked Questions):
Q: Can I use this product outdoors?
A: No, this product is not suitable for outdoor use. It should only be used indoors.

3-light vanity
Barra para tocador de 3 luces

INSTRUCTION MANUAL

IMPORTANT, KEEP FOR FUTURE REFERENCE:
PLEASE READ CAREFULLY.

INCLUDED HARDWARE

CAUTION
If using a dimmer, it must be LED-compatible.

IMPORTANT
The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty.
We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used.

WARNING:
Risk of electrical shock. Turn off breaker at the panel.
Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance.
Do not use outdoor.

WHAT YOU WILL NEED…

CAUTION
If using a dimmer, it must be LED compatible.

IMPORTANT
The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty.
We recommend that this product be installed by a certified electrician. In some states or provinces, it is a legal requirement for this type of product to be installed by a certified electrician, according to the electrical and building codes effective in the region where the unit is used.
Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance.

STEP-BY-STEP INSTALLATION

1. Turn off breaker at the panel.

2. Remove the mounting bracket (fig. 1).
   Fasten the mounting bracket onto the junction box using two juntion box screws (fig. 2).

3. Connect the white wire from the light fixture to the white supply wire from the junction box using a wire connector.

4. Connect the black wire from the light fixture to the black supply wire from the junction box using a wire connector. Connect the ground wire from the junction box and the ground wire from the light fixture to the ground screw on the mounting bracket.

5. Push the wires into the junction box. Mount the light fixture onto the mounting bracket and secure it with the 2 support screws (fig. 3). Remove the lampholder ring for later use.

6. Install the glass shades and use the lampholder ring to secure with the glass shades. Do not over tighten to avoid damaging glass shade. Repeat this step for the remaining glass shades.

7. Restore electrical power.

NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2.  This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

LIMITED WARRANTY

RUEE APPLIANCES CO., LTD warrants all of its lighting fixtures excluding surface coating and acrylic diffusers against defects in materials and workmanship for five (5) year from the date of original purchase. Electronic parts including passive infrared devices and photoelectric switching mechanisms are warranted for five (5) year from the date of original purchase.
This warranty does not cover parts becoming defective due to misuse, accidental damage, improper handling and/or installation and specifically excludes liability for indirect, incidental or consequential damages. Some states and provinces do not allow limitations on how long an implied warranty lasts, and/or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights and you may also have other rights which vary from state to state and province to province. Answers to questions regarding how to obtain warranty service may be obtained by email the address below: customerservice@ruee.net

RUEE APPLIANCES CO., LTD
NO.100 JINTONG ROAD, TANGXIA TOWN, PENGJIANG DISTRICT, JIANGMEN CITY G.D CHINA
Customer Service E-mail: customerservice@ruee.net
Correo electrónico del Servicio de atención al cliente: customerservice@ruee.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>