EFCUT C30 LITE Wood Chipper Shredder Mulcher Installation Guide

EFCUT C30 LITE Wood Chipper Shredder Mulcher

Product Information

Specifications

• Model: EFCUT
• Recommended Oil: SAE 15W-40
• Website: www.efcut.com

Product Usage Instructions

Assembly:

1. Fit the support and main body assembly together.
2. Fit the tires and bracket together.
3. Fit the bracket together with the cover of the housing.
4. Install the chute.
5. Install the bottom hopper.
6. Install the upper hopper.
7. Install the handle.

Filling Oil:

For general use, it is recommended to fill the product with SAE 15W-40 oil. Follow the steps below:

1. Locate the oil fill port on the product.
2. Remove the cap or plug from the oil fill port.
3. Pour the SAE 15W-40 oil into the oil fill port until it reaches the recommended level indicated on the product.
4. Replace the cap or plug on the oil fill port securely.

Product Usage

EFCUT is designed to make your garden a beautiful landscape. Follow the steps below to use the product effectively:

1. Ensure that all assembly steps are completed correctly.
2. Start the product by following the instructions in the user manual.
3. Position the product on the desired area of your garden.
4. Engage the appropriate settings for your desired result (refer to the user manual for specific settings).
5. Slowly push or guide the product over the desired area, allowing it to perform its function effectively.
6. Monitor the product’s performance and make adjustments as necessary.
7. When finished, turn off the product and clean any debris or residue.

FAQ

Q: What type of oil should I use?

A: It is recommended to use SAE 15W-40 oil for general use in this product.

Q: Where can I find more information about the product?

A: For more information about the product, visit our website at www.efcut.com.

ASSEMBLY GUIDE

1. Fit the support and main body assembly together.

2. Fit the tires and bracket together.

3. Fit the bracket together with the cover of the housing.

4. Install the chute.

5. Install the bottom hopper.

6. Install the upper hopper.

7. Install the handle.

8. Fill oil.
   SAE 15W-40 is recommended for general use.

EFCUT
makes your garden a beautiful landscape

WWW.EFCUT.COM
efcut

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>