AOTULE F7S8P9X10 Car Navigation Multimedia Receiver User Manual
- June 14, 2024
- AOTULE
Table of Contents
F7S8P9X10 Car Navigation Multimedia Receiver
User Manual
F7S8P9X10 Car Navigation Multimedia Receiver
Settings
After the release of ATOTOF7 we will release system firmware from time to time
to optimize and improve it to ensure its best performance.
When the new system firmware update is available, a notification wit be put up
in the notice section of the https://www.myat0to.com/website, providing
detailed update instructions; [tis recommended that users register a user
account to receive email notifications of possible upgrades
8.2Display Settings
8.2.1 Display
Slide to adjust the screen brightness, contrast, saturation.
8.2.2 Wallpaper
Two waystoseta wallpaper for FT
(1).Preset. There are preset wallpapers, and it will apply immediately when
selected.
(2). Add manually The system allows users to put qualified images in a US8
flash drive or Micro SD card. Select a picture and tap the circled icon to set
it as wallpaper
8.2.3Screensaver
You have the option to turn the screensaver function ON or OFF You can also set the time duration for the screensaver to activate when the screen is idle. Choose the style of the screensaver clock and you’ll be able to preview the selected style immediately
8.2.4Video prohibition
(1).for your safety, users cannot watch videos while driving the vehicle There
is a specific cable labeled as «Parking Brake» from the back op7 tar detecting
the status of your vehicle’s hand brake (if applicable), When it is correctly
connected and this option is enabled, you will see a notice on the video
playback screen (Figure 49) while your vehicle is in motion, and it want
disappear once your vehicle is parked and your hand brake is applied; (2)This
option only applies when you run 
8.2.5 Backlight
You have the option to turn the backlight for the panel keys ON or OFF. Choose
a color for the panel key from Yellow, Blue, Green, White, Purple, Red, Cyan,
or Loop. If “Loop” is selected in the Backlight Color settings, the panel key
will continuously cycle through the above-mentioned colors. The duration of
each color in the loop can be adjusted from 110 30 seconds (see Figure 48)
8.2.6 Touch Calibration
The purpose of the touch calibration feature is to ensure that the. position
of the text on the car stereo interface matches the actual response location
when tapped (see Figure 48).
8.2.7 Logo Settings
Navigate to ‘Factory Set’ and use password 2860 to access the logo settings interface. You have two options for setting the logo:
- Internal Storage: Choose the logo directly from the internal storage.
- External Storage: f your car logo isn’t available in the internal storage, you can create a JPG image of your car logo and save it in agile named “Logo”. Transfer this “Logo” file to a USB drive or Micro SD card, and F7 willdentify it as the externally stored logo.
8.3 Audio & EQ settings
83.1EQ
Capabilities Expansion
7 preset EQ sound effects are
Touch or move the icon to adjust the listening position
The value of Fade (FAD) Front7-ioar 7
The value of Balance(BAL) Lot 7 ight 7
8.3.3 Subwoofer Output:
Touch to adjust the external subwoofer volume.
8.3.4 Dual Audio Control: To adjust the media volume from 0dB to 15dB
when running navigation in CP/AA and listening to the radio or playing music
from a USB flash drive simultaneously
Capabilities Expansion
With lots of inputs, outputs, slots, F7 can connect to a variety of external devices. These accessories for connecting to the F7 to extend its functionality are not included in the package. They are provided separately. For accessories customized by ATOTO, you can find them either on Amazon ATOTO brand store or the ATOTO official website at https://www.myatoto.com. For accessories not provided by ATOTO, you may need to get them by yourself.
9.1.Connect to are gular aftermarket rearview camera
Connect to a regular after market rear-view camera, or specific ATOTO HD ear-
view camera for Live Rear-View, or a specific front camera See Chapter 7 for
details;
Connection Method Specie chin video input
9.2. Upcoming ATOTO USB DVR Connectivity
F7’s app list includes the DVR-CAM app, this indicates future compatibility
with the ATOTO USB DVR AC-44P4.
Once this product is released, we will update the information in the F7
product description accordingly. Additionally, you can also find the AC-44P4
on the Amazon ATOTO brand store and the ATOTO official website at
https://www.myatoto.com.
(Note: On F7, the app for DVR is named “DVR-CAM”, while on ATOTO android
head units, it’s named “DVR CAM”.)
9.3.Work with ATOTO AC-44F5 Wireless Steering Wheel Remote
For cars without steering wheel audio control, ATOTO AC-44F5 wireless Remote
is highly recommended for safe operation Connection Method: Wireless
(Transmitter)
+ Specified 3.5 mm jack (Receiver)
9.4.Work with ATOTO AC-HAV50 HDMI to AHD Video Converter:
This handy device offers a conversion of digital HDMI to AHD, supporting
high-definition resolutions up to 720p for an immersive theater-like
experience. Its compatibility ranges from PlayStation game consoles to Google
Chromecast and Apple TV boxes. With a simple plug-and-play design, you can
effortlessly enjoy your favorite movies, shows and games just on F7.
9.5.Connect to headrest monitors
The built-in Video Output feature allows users to connect up to 2 monitors to
F7 via RCA Video Out interface, and what’s displayed on the F7 will be
synchronized on the headrest monitors. The headrest monitor connected to F7
should accept RCA CVBS signal video input.
Connection Method: Specific video Output This option is only available on
selected F7 models
9.6.Upgrade your F7 to Versatile Android System with the ATOTO AD6 Android-
based CarPlay Adapter:
Upgrade your CarPlay head unit with our AD6 adapter, which adds a fully-
functioning Android system to your dashboard.
You can enjoy Wireless CarPlay and Android Auto, along with a world of apps,
such as YouTube and Netflix. Plus, you can keep track of your vehicle with
ATOTO’s exclusive GPS tracking app “Track” and easily check your car’s
diagnostics through the preinstalled “Torque” app.
9.7.Enhance your audio experience with ATOTO CA-AEC02 Power Pack:
Delivering a powerful GOW RMS x 4 at 4Q, this compact full-range amplifier
significantly amplifies your sound system’s output. Its high-frequency
performance captures every note, providing you with a high-quality sonic
experience. It’s compact, easy to install, and compatible with arrange of
ATOTO, aftermarket, and factory head units. 9.8.Work with ATOTO CS-651DST
Component Speakers and ATOTO CS-651DC Coaxial Speakers:
Give your car audio a major upgrade with the CS-651DST component speakers
and CS-651DC coaxial speakers. The CS-651DST comes with 6.5″ woofers, 1″
tweeters, and external crossovers, delivering up to 250 watts of peak power
and 70W RMS power. The CS-651DC offers clarity and balance with a frequency
response of 40 Hz – 20 kHz, 230W peak power, and GOW RMS power. Both are
designed to make all genres of music come alive in your car, promising a
concert-like experience every time you drive.
9.9.Work with ATOTO CS-101SW
Slim Amplified Subwoofer:
Discover the deep, resonating bass tones with our CS-101SW 10 inch slim
amplified subwoofer. It provides 150 watts of RMS power and 400 watts of peak
power, letting you immerse yourself in arch audio experience.
It comes with adjustable low-pass filters, bass boost, and a wired remote
control for precise sound adjustments.
9.10.Attentions
The above are the common optional accessories for F7. They are provided
separately. Some are customized by ATOTO, others are not available from ATOTO,
and users need to get them by themselves.
Appendix (Product Specifications)
Specifications
Part| Specifications
Operating System| RTOS V
SOC Chipset| AL-F133
Monitor| Screen Size(inch): Depending on the specific F7 model, it can be from
6.2 in to 10.1 inches (diagonal)
Display Resolution: HD 1024,600 or 1280’720 depending on the specific model
Display system: Depending on the specific model, it can be TN-LCD, IPS-LCD, or
QLED (quantum film LED-backlit LCD technology).
Lighting Brightness: 450 – 600 cd/m2
Radio|
Reception Band
| FM:65-108MHz, detailed band range varies by regions; Preset station: 3*6=18
stations
AM:522-1710KHz; detailed band range varies by regions; Preset station: 2″6=12
stations
RDS Decoder| YES
Stereo Audio DAC| YES
Bluetooth
| Bluetooth Version: 4.2 or 5.0 depending on the specific model
---|---
Protocol: HFP,HSP,A2DP,AVRCP,PBAP
A2DP Audio playback support: SBC, ACC
Channel output: Stereo, Mono
Dsp
Acoustics
| Chipset: BD37033
EQ Band: Standard R&B Rock Popshops Hop, Jazz Dance Custom
Frequency: 30/60/125/250/500/1.0k/2.0k/4.0k /8.0k/10.0K/12.0K/16.0k (Hz)
Gain: -7/-6/-5/-4/-3/-2/-1/0/1/2/3/4/5/6/7(dB)
Subwoofer Filter: 0-34dB
Pre-Amplifier| Power Output| For F7 basic models: 4 x 45w/ 4.0 max.
4x 25w RMS/ 40 @ 14.4 V, 1kHz,
THD 10 %; Impedance:4-80
Output Frequency Band| 20 – 22000 Hz
Media
Playback
| Audio DAC| D/A Converter: 24Bit
Audio/Video/Image| Audio: AAC/APE/FLAC/ATRC/AMR /ALAC/M4A/MP3/O0GG Vorbis/COOK
Media /WMA
Video: 1080P/ASF/AVI/DAT/FLV/WMV /Sorenson/VOB/M4V/3GP/H263
/H264/H265/MKV/PMP/MPG/MPEG1
/MPEG2/MOV/MP4/MPEG4/TS/TP /RMVB/ RV8/RV9/RV10/VC1
{720×576)/M2TS Image: JPEG/BMP/JPG/PNG
USB Interface| Phone Link| USB1 (Labeled as <Phone Links) supports CarPlay,
Android Auto and AutoVIN (Mirror Link) Connection
---|---|---
Portable Media Playback| Both USB! & USB 2support Media Playback, and can read
up 10 2T portable SSD device (FAT32/NTFS/exFAT)
Output
&input| Audio Out| 4XRCA Out (2V,4V/10K0): Labeled as
AUX Audio Input| 1XRCA Subwoofer Out(800MV/10KA): Labeled as
2xRCA Audio Input (Left/ Right) (Max2V/25K0) :Labeled as
AUXVideo Input| 1xRCA Video Input (1Vp-p/750): Labeled as
FCAMvideo input| 1xRCA Video Input (1Vp-p/750): Labeled as <Front Camera Inx I
supports both CVBS signal and Analog HD signal video source This option is
only available: on selected F7 models;
Rear View
Cameranput| 1XRCA Video Input (1Vp-p/750):
Labeled as
Video Out| 2xRCA Video Out (1Vp-p/750). Labeled a5 <Video Out 1> / <Video
Out2>
SWC Jack| Works with ATOTO AC-44FS Steering Wheel Remote Control
General| Operation Voltage: 12v DC car battery.
Rated Current Consumption: 154 Standby Current10mA
Operation Temperature Range: -20°C – +60°C
FCC Statement
This equipment has been tested and found to comply with the limits for a
ClassB digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices). This equipment complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the
equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>