Shenzhen Aotule Electronics Tech A6F7S8P8 ATOTO Car Navigation Multimedia Receiver User Manual
- June 6, 2024
- Shenzhen Aotule Electronics Tech
Table of Contents
Shenzhen Aotule Electronics Tech A6F7S8P8 ATOTO Car Navigation Multimedia
Receiver
PRECAUTIONS
- This manual is applicable to all ATOTO S8 models (Gen2). Some functions mentioned in certain chapter of this manual is only available on selected ATOTO S8 (Gen2) models. New released S8 models may have extra functions that are not mentioned in this user manual.
- More information about panel operation, wiring connection and installation, as it relates to specific S8 models, please refer to specific documentation included in the package;
- The screenshot image provided in this manual may be different from what’s displayed on current system. ATOTO may release new system update, which may include changes made, or new added functions that are not mentioned here. Users can contact [email protected] to download latest Operation Manual;
- The information in this manual may be insufficient. If you have any questions or problems concerning your unit that are not covered in this manual, consult your ATOTO dealer.
- IN NO EVENT SHALL ATOTO BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.
As an environmentally responsible company, we try to reduce paper consumption as much as we can. Scan this QR code to access our on line platform, where you can not only download all of our manuals in different languages, but also consult them more quickly by going to different sections with a finger tap.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).
Home Screen, Drop-down Menu, Wallpaper & Widgets
Introduction of Icons on The Main Menu
Area A:
Click BACK button to go back to the previous menu or exit the current app.
Click HOME to go to Home menu and the app will run in background.
Click BACKGROUND APPS button to enter into background apps.
Click symbol to adjust screen brightness (three level adjustments).
Click symbol to wake up phone assistant via S8’s Bluetooth
Area B: Drag downward to display more shortcuts and recent notifications.
Area C: Status bar for displaying phone signal and battery level, network
connection, system volume, etc.
Area D: Widget on Home Menu
Area E: Shortcut of frequently used apps can be put in this area:
Area F: Press and hold this area for one second to enter Into
If you do not like the way these apps and shortcuts are displayed, you can Install third-party Home launcher from Google Play Store. Certain customized functions may not work properly on non system launchers.
Recommended Home Launcher apps by previousATOTOA6 Users:
- Car launcher AGAMA
- Car launcher Pro
- Car web guru launcher
- Nova Launcher
AreaA
-
WiFi. Click and hold for one second to enter WiFi Settings.
-
Screenshot.
-
Reboot. Click to let the system reboot.
-
Data. Click and hold for one second to enter the Data Usage option.
This option is only available on selected S8 models. -
Settings. Click to enter system settings.
-
Clear Memory. Click to free system memory and speed up the system.
-
Eye comfort. This icon allows the system brightness to be set to eye protection mode. Press and hold the icon to enter the detailed settings.
-
EQ. It is a shortcut to enter the audio setup(including equalizer settings, etc.) of the system.
-
Gallery (standby mode). Tap to enter into the standby mode. It will loop playback the pictures stored in the
of the File Manager app. -
Area B: Brightness adjustment bar. Click or drag to adjust screen brightness.
-
Area C: System & app notifications.
Wallpaper & Widgets
Enter into Wallpaper & Widgets Settings
Press and hold Area F in for one second to enter into
Set Wallpaper
Two methods to set Wallpaper.
Method 1. Choose from preset wallpapers. Click (1) or (2) to select from
preset wallpapers.
Method 2. Select from your own photo folder.
Prepare these images in a flash drive and use Gallery app, browse them, select desired one and apply it via ID. The resolution of images that are being set as wallpaper must be in 1024×600;
Set Widgets
Drag desired widget from widget list to the place where you want.
Customize the size of the widget.
Press and hold the widget until it is selected, then drag to adjust the size.
Remove the widgets: Press and hold the widget until f3 appears in the middle
at the top of the screen, drag the widget there to delete it.
Touch Screen Gesture
Touch screen gesture is a set of gestures to help users operate conveniently on the multi-touch screen.
-
Two-finger scroll-up
Operation: A two-finger scroll is a drag performed with two fingers making a quick down-and-up motion.
Function: To enter into multi-task menu.
-
Two-finger Tap
Operation: A two-finger tap is a tap performed with two fingers making two- times continuous tap.
Function: To open preset EQ and allow users to shift EQ mode among preset 9 EQ modes.
-
Two-finger scroll-down
Operation: A two-finger scroll is a drag performed with two fingers making a quick up-and-down motion.
Function: To enter into main menu (Home).
-
Two-finger scroll
Operation: A two-finger scroll is a drag performed with two fingers making a quick left-and-right or right-and-left motion.
Function: To go back to the previous menu.
-
Three-finger tap
Operation: A three-finger tap is a tap performed with three fingers making two-times continuous tap.
Function: To shift font size among small, middle and large (On some apps it doesn’t work).
- Three-finger scroll
Operation: A three-finger scroll is a drag performed with three fingers making a up-or- down motion.
Function To adjust screen brightness
Attention:
- Touch screen gesture may fail to respond on some apps such as map;
- Touch screen gesture may fail to respond if users’ hand is wet or worn gloves;
- Function description for each gesture may change in future firmware updates based on user feedback.
Enable/disable Touch screen Gesture feature in system settings.
Split Display
Enable Split Display
Step 1. Click to enter into background apps (An app that is opened, and
is running in the background).
Step 2. Find the desired app and then click to let it run on the left,
then open the second app from the other background apps on the right side that
you want to let it run on the right window.
Exit Split Display
Scroll left or right from the adjacent side of the two display (Figure 12) to
a single-window display.
Note:
Only the app with a specific on it can support Split-Screen; if there isn’t on
the app when browsing on background apps, this means that this app does not
support the split-screen display feature.
Bluetooth Handsfree & A2DP Music Streaming
Enter Bluetooth 1 via Either One of Below Two Icons
Bluetooth 1 Settings
- Customize the Bluetooth name;
-
Switch. When it is enabled, the incoming call will be automatically answered in 6 seconds if no manual operation; - Click to reset the Bluetooth 1. When you found Bluetooth 1 working improperly, click this may help fix issues.
- This option is only applicable when new Bluetooth firmware is released for fixing certain issues. And further operation guide will be available on https://support.myatoto.com or can be obtained from ATOTO customer service support team.
Bluetooth Connection
-
Display paired devices list
-
Display available devices list
-
Bluetooth device that is successfully paired
-
Click to delete the Bluetooth device aforementioned
-
Devices discovered by SB Bluetooth;
-
Click to scan Bluetooth devices around SB. Be sure your phone
Bluetooth is enabled and is set to be discoverable -
With this enabled, CarPlay or Android Auto will be automatically launched after Bluetooth connection.
Bluetooth Contacts
For the first time of phone connection to SB Bluetooth.
When a cell phone is connecting to S8 via Bluetooth 1 for the first time, it
will also send request for sync phone contacts to S8. You need to select YES
for prompts on your phone;
- Search for specified contact
- Click to send request for re-downloading phone contacts
- Contact list
- Click to save specific contact to favorites. For saved contacts, click to remove it from favorites
- Switch between all contacts and favorites
- Quick search for contacts with the first letter
Call Log
- Call log list
- Call log classification
- Clear all the call log in the list
Dial Number
- Dial pad
- Delete the last number
- Click to start a call
- S8 Microphone ON/OFF switch
- Switch between cell phone speaker and car speakers
Bluetooth A2DP Music Streaming
Bluetooth Music Playback
- Song information
- Bluetooth Codec that are being applied
- Dynamic music spectrum
- Bluetooth Audio Remote Control button (AVRCP)
More about BluetoothA2DP Codec
There are four Bluetooth Codecs SBC, AAC, aptX, and aptX HD supported by
theATOTO S8 series.
aptX HD is only available on selected S8 models.
Apple iPhone only sends audio viaAAC codec. Most smartphone with OS Android
8.0 or up supports SBC, AAC, aptX, aptX HD. Smartphones of the early Android
version may only support some of them (SBC, AAC). The latest HUAWEI Android
phone may not support aptX or aptX HD codec. Some phones of Android 9, or
updated from Android 8 to Android 9, may lose aptx HD option. These are
determined by the phone manufacturer and its system firmware. Applying aptX HD
codec may result in unstable connection and sound quality. If the connection
is unstable, such as when producing only intermittent sound, and there is an
option
About Bluetooth Voice Activation Option
There are 3 methods for users to wake phone voice assistant withATOTOS8;
Method 1. Touch the icon at the top of the system screen;
Method 2. Use one of your steering wheel audio keys to wake the phone
voice assistant;
Method 3. Use voice button onATOTOAC-44F5 Wireless IR Remote;
For Android phone, you need to check the prompt box from phone side for the
first time. Then select the voice app and
