san jamar SCDG2LP Low Profile Digital Kitchen Scale Instructions

san jamar SCDG2LP Low Profile Digital Kitchen

Instructions

Thank you for purchasing San Jamar’s NSF Certified Low-Profile Digital Kitchen Scale (SCDG2LP). Please take a moment to review the key features and instructions for use.

Capacity: 2 lbs. (1,000 g) Graduation: 0.05 oz. (1,000 g)

INSTRUCTIONS FOR USE

1. Initial Setup
   • A. Insert batteries into the battery compartment located beneath the scale.
   • B. Place the stainless steel plate on the scale.
2. Weight Measurement
   • A. Press the On/Tare/Off button on the scale.
   • B. Press the g/oz button to change the units of measurement.
   • C. Place an item on the scale in the center of the platform.
3. Tare (Add & Weigh)

Ignore weight of a container:

1. Turn on the scale and place the container on the platform.
2. Press the On/Tare/Off button and zero weight will display.
3. Add items into the container to be weighed.

Find the individual weight of multiple items in one container:

1. Press On/Tare/Off to reset the scale back to zero weight.
2. Add additional items to be weighed.
3. Repeat steps 1-2 for each additional item.

C. Reset the scale back to zero weight

1. If nothing is on the scale and it does not read zero weight, press On/Tare/Off button to reset the scale back to zero.

• Automatic Shut-Off/ Override Automatic Shut-Off
  • The scale will turn off after 5 minutes of inactivity to save battery
  • A switch to override the auto shut-off is located in the battery compartment.
• Turn the switch “ON” to override the auto shut-off feature.
  • V. Cleaning Instructions
  • A. Clean the scale with a mild detergent and a damp cloth. DO NOT SUBMERGE IN LIQUID.
  • B. Apply an approved food grade sanitizer to sanitize before use.

ATTENTION : When using the tare feature, the weight of the container cannot exceed 2 lbs. or 1 kg. Once the total weight actually on the scale reaches the maximum capacity of 2 lbs. the overload warning code (EEEE) will display. If load cell is damaged or needs recalibration load cell warning code (Out2) will display. If scale is not on a stable surface the unstable environment warning code (unset) will display

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>