NPS alpha Dog Training Device Instruction Manual

NPS alpha Dog Training Device

Important information

Welcome to NPS

DO NOT start to use the device before watching important video guide at

PETNPS.COM/START

or scan the QR

Based on 200 000+ sold units 97% Satisfaction Rate means less than a 3% failure due to dog nature traits.

Less than Thrilled?
Smile! Keep your device and we’ll issue a full refund or replacement, whichever makes you HAPPIEST!

[email protected]
WE MAKE IT EASY 24/7

What Include

NPS dog training device x1

Charging cable x1

Wrist strap x1

User manual x1

Product Overview

Product Characteristics

• Ultrasonic emission distance: up to 25 feet
• Battery capacity: 1000mAh
• Charging time: 1-2 hours
• Work modes : Sound mode, ultrasonic mode, flashlight + Ultrasonic Mode
• Device Size: 4.13 x 1.63 x 1.33 inch

Safer for Humans, Optimal for Pups

The ultimate combination of training and safety protection, this NPS dog training device emits 25kHz +/- 1.0 kHz for 8 seconds, just long enough to safely grab your dog’s attention and anchor behavioral modification, without harming human hearing in our 20 Hz to 20 kHz sound range.

Advanced Training Modes

The NPS dog training device has 3 easy to use training modes, sound mode, ultrasonic mode, and ultrasonic plus flashlight modes, which means you can train the way that works best for your dog.

Grab Attention with Sound Mode

Not coming when you call? Press the sound mode button once for a single beep, or hold the button for continuous beeping.

Chase Stopper. Ultrasonic Mode

Press once to stop your dog barking. Hold down to cause dog to return during a repeated event.

Flashlight plus Ultrasonic Mode

Avoid lost dog situations. Press once for short flashing and ultrasonic emission. Hold down for more challenging situations.

Pre Use Check

• Turn on. Green LED indicator will flash.
• Press once any button. Green LED indicator will flash.
• Hold any button. Green LED indicator stays on.

Battery Indicator

• If the device flashing red 5 second and automatically shuts off – means low battery.
• Charge till the red light changes to green once fully charged.

Operation Guide

Step 1. Test the Device

Go to open a space and test the device within 25 feet of your dog

Checking Performance

Switch on. Press the sound mode button. The green LED indicator light should flash. You’re ready to go! Flashing red? Simply charge with the included and test again once the light is continuously green.

Step 2. Test 3 Training Modes

Gentle, natural, and effective. This device is proven to shift ingrained behaviors by starting with sound mode, then advancing to ultrasonic mode, then ultrasonic + flash mode.

Grab Attention with Sound Mode

Hold the device within 25 feet of your dog. When a dog barks, speak command (ex. Stop! Hush! Quiet!), then press the sound mode button once. If a dog continue barking without a break, hold the button down until dog stop. If a dog barks again after a break, push sound mode again once.

Chase Stopper – Ultrasonic Mode

In case the sound mode is ineffective on your dog. Press the ultrasonic mode button 1 time when a dog barks. Hold if a dog doesn’t stop barking. Repeat when a dog barks again. Due to safety reasons ultrasound stops at 8 sec, even if holding, to protect your pupʼs ears.

Max range up to 25 feet

Night Halt – Flashlight + Ultrasonic Mode

Designed to call back and correct even the most mischievous dogs.
Hold the device in your hand. When a dog is within 25 feet of you and barks at you, you can point the device at the dog. And say:
Stop! Hush! (or a similar command)

Press once to emit 1 second of ultrasonic pulse and flashing. Safety shut-off prevents more than 8 seconds of pulsing and flashing to protect pupʼs ears when holding the ultrasonic + flashlight button down.

Your Behavior Matters Tool

The more consistently you press the button as your dog barking, the faster training proceeds. For the best results, please make sure you’re not more than 25 feet from your dog and without obstacles in between.

Critical Safety Precautions

• NEVER allow a child to control.
  It is a training device, not a toy, and it’s important that your dog hears it only when you need to modify your dog’s behavior.

• Do not immerse this device in water or other liquids.

• Do not use this device on dogs younger than 6 months as there is not sufficient testing on how repeated ultrasonic waves impact a puppy’s developing auditory system.

• Showing your dog patience and love goes a long way in building the bond that helps your dog listen, so please use this device with kindness.

Charging

When the LED indicator goes red. Battery is discharged. For battery protection the device turns off in 5 seconds automatically. Please charge the device. Use the USB cable that comes with the device.

While charging the battery the red charging indicator is on.
If the green charging indicator is flashing, the battery is fully charged.

Charging time : 1-2 hours
Time of uninterrupted working in th
SOUND mode : 3 hours
Time of uninterrupted working in the
ULTRASONIC mode: 1.5 hours

Strap Inserting

Frequently Asked Questions

Q1: Does Ultrasonic Affect Other Animals?

A1: Itʼs not impacted other animals as long as they are out of 25 feet range. Household pets like cats and birds are not affected.

Q2: Will this hurt my other dogs who aren't reactive barkers?

A2: While it will not harm your other pets, this is a training device, so separating your already trained dogs from your reactive barker is advisable to avoid confusion. 25 feet is all that’s required.

Q3: Why is NPS most effective with dogs age 6 months to 8 years?

A3: Age-related hearing loss makes it challenging for dogs over age 8 to hear and react. Before 6 months, a puppy’s auditory system is not developed enough to fully understand the impact, so we err on the side of caution and recommend you only use it at 6 months or older.

References

• activation-alpha-anti-barking | NPS Anti Bark Tools

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>