KTYU L1850 18 Inch Brushless Cordless Chainsaw Instruction Manual

16” & 18″ Brushless Cordless Chainsaw
MODEL NO. L1850

Dear users:

Thank you for choosing our products, we develop and manufacture high quality products according to customer requirements. Our products still show excellent refiability under extreme working condiitions. We also stand for quaity of service. Our professional retailers bear the product of the question-and- answer service support. Thank you very much for your trust in us, wish you a pleasant use!
WARNING: Thank you for choosing our products, we develop and manufacture high quality products according to customer requirements. Our products still show excellent reliability under extreme working conditions. We also stand for quality of service. Our professional retailers bear the product of the question-and-answer service support.
Thank you very much for your trust in us, wish you a pleasant use!
warning
Please read all safety warnings and instructions carefully, failure to comply with them may result in electric shock, fire or other serious injury. Please retain all warnings and instructions for future reference.

Product Specification

1| Shear Diameter| 430mm
2| Rated Voltage| DC42V
3| Rated Power| 2800W
4| Chain Speed| iiirnIs
5| 16-inch Chain| 318 ,59 DL
18-inch Chain| 318 ,62 DL
6| Chain Plate Specification| 16 Inches
Chain Plate Specification| 18 Inches
7| Weight| a3.1 kg
Li-battery
1| Capacity| 2 x5.0 Ah
2| Voltage| DC42V
3| Working Time| 20-30mins
4| Battery Weight| 0.5 kg
Charger
1| Rated Voltage| US 110.120V ; EU 220-240V ; 50-60Hz
2| Charge Time| 2-2.5h
| Read the instruction manual. Do not let the tool get wet
---|---
Power cord defective or cut please unplug in time warning/danger
Wear safety glasses and protective clothing
Wear ear muffs and boots
Chain saw running direction oil can mark
Don’t throw it around to prevent jumping saws
Keep away from fire and damp conditions

1. Chain
2. Guides
3. baffle
4. Controller
5. Case
6. switch trigger
7. self-locking button
8. Battery Pack
9. Cover knob
10. Cover Plate

Safety specification

scope of application of this tool: sawing, pruning and cutting of some small diameter trees suitable for garden, orchard use.

Precautions before operation

1. The use of unmarked and unapproved battery packs and chargers may cause fire or explosion, which may cause serious or fatal injury and property damage.

2. The use of chain saws, battery packs and chargers beyond their design specifications can cause serious or fatal injury and property damage.

3. Battery pack instruction manual:
   Please refer to the battery pack and charger instruction manual in the battery pack package

4. charger operating instructions:
   Please refer to the battery and charger pack instruction manual contained in the battery pack Operator requirement

Warning:
Do not use or touch chainsaws, battery packs and chargers without reading and unders- tanding the instructions. Failure to do so may result in serious injury or dedth to the user or others. Read the instructions to make sure you understand them and save them for future reference.
Ensure that users fully comply with the following requirements:

1. When operating the chain saw, using the battery pack and charger, the user must ensure that the physical condition, mental state and psychological state are in normal condition and suitable for operating the equipment. If the user has the above restrictions, please use it in the presence of a guardian or a responsible person,
2. The user must be an adult
3. When using the equipment for the first time, users should ensure that they receive the instructions from our dealers or our professional operation instructions before operation.
4. The user shall not use the device under the influence of alcohol, drugs or other drugs. First-time chainsaw users must first practice sawing on a sawhorse or stand.

Dress and protection requirements

warning:

1. Dress appropriately do not wear loose clothes or accessories, keep clothes, gloves and hair away from moving parts, loose clothes or long hair may be involved in moving parts.

2. The chainsaw may have debris or other wood chips thrown out in the working state, which may cause physical injury.
   Please wear safety goggles when operating.
   a. Protective masks are recommended.
   b. Wear long clothing.

3. Falling objects can cause head injuries.

4. bust and wood chips will be raised during operation, and dust and disdain will cause air not to circulate or cause allergic reactions.

5. LLi-fitting clothing may be hung on branches and tree rights, causing obstruction and impact when using a chain saw. Users can cause serious injuries due to inappropriate clothing.
   a.Please wear close-fitting and compact clothing.
   b. Please remove scarves and jewelry.

6. the user may be close to the operating chain when using the chain saw, which will cause serious injury to the user.
   A. Please wear long pants with a protective cutting grade, which is defined by the speed of the chain saw.

7. Users may injure themselves when sawing wood. Especially when cleaning machines and chains, hands will come into contact with sharp edges such as chains
   a. Wear protective gloves when working

8. wearing inappropriate shoes may cause slipping or falling.
   If you come into contact with the saw chain after a fall, it will cause injury to the user. Please wear chainsaw protective boots, the protection level of the boots is defined according to the speed of the chainsaw.

Working environment requirement

Perimeter security requirements

1. Bystanders, children and other animals are not aware of the threat of harm from wood chips or other debris flying from the chainsaw during operation. Bystanders, children, and animals could be seriously injured.
   a. Please ensure that bystanders, children and animals are kept away from the work area.

2. The chainsaw is not waterproof and may cause an electric shock if you use it in the rain or wet environment. Users can get hurt, chainsaws can be damaged.
   a. Do not use chain data in the rain or wet environment.

3. The motor of the chain saw may produce sparks, and in the environment of combustible or explosive materials, sparks will lead to fire and explosion.
   These can result in serious injury or death and property damage.
   a. Do not work in an environment with combustible and explosive materials.

Machine safety requirement

Achain saw is safe if:

1. The chain is not damaged.
2. The chainsaw is clean and dry.
3. Chainsaw handle intact.
4. The chainsaw trigger switch works normally.
5. The control program works properly and has not been modified.
6. The chain saw lubricating oil feeding system is normal.
7. The depth of the tooth groove of the sprocket and the chain should not exceed 0.5mm.
8. The assembly of guides and chains is in accordance with the instructions in this manual.
9. Guide plate and chain are in good condition.
10. The chain is normally tensioned.
11. Use the original accessories to match the chain saw.
12. Normal assembly of accessories.
13. The oil pot is locked and closed.

Warning
If the product no longer meets safety requirements, the part does not function as it should, or the safety mechanism does not function properly, these conditions can result in serious or fatal injury.

1. Only @ good chainsaw can be used. If the chain saw is dirty or wet: clean it and let it dry.
2. Do not modify your chain saw, such as: modify the guide and chain.
3. If the control system does not work properly, do not use the chainsaw.
4. Only the accessories and accessories provided by us can be used.
5. Install guide plate and chain according to the instruction manual.
6. Please refer to the instructions for the installation of accessories.
7. Don’t stick anything into the chain saw.

Guide safety notice

A guide is safe to use if:

1. All functions of the guide plate are intact.
2. The guide plate is not deformed or incomplete.
3. There is no significant change in the groove depth of the guide plate.
4. Guide track smooth without burrs.
5. No shrinkage or cracking of the guide groove.

Sue!
If the guide is not in @ safe condition, the guide will not fit well with the chain, and the chain may jump out of the guide, resulting in serious o fatal injury.

1. Only guides without damage can be used.
2. If the guide groove planting is less than the minimum depth, replace the new guide.
3. Remove the garbage on the guide plate after the operation of the chain saw.
4. If you have any questions, please contact our business. Chain safety notice

The chain is safe to use if the guide meets the following conditions:

1. The chain is not broken.
2. sharp edge of the chain cutter head.
3. The cutting depth of the cutting edge of the chain cutter head meets the description of the service mark
4. The length of the cutting edge of the tool head meets the grinding standard.

Police report!
Parts that do not meet safety standards cannot function as they should, and safety devices will fail, resulting in serious personal injury or even death

1.  Do not use damaged chains.
   (2) Grinding chain cutter head according to the specification.
   (3) I you have any questions, please contact our dealer in time.

Operation precautions Cutting note

Police report!

1. In some specific cases the operator may not concentrate on the work, the operator may trip, fall and cause serious injury.
   a. stay calm and work with a plan
   b. Do not use chain saws in dark and low-visibility environments
   c. Please operate your own chain saw.
   d. Do not operate the chainsaw higher than your shoulder height . Watch out for obstacles.
   Stand in a safe position and keep your balance when operating the chain saw. If you need to work at altitude, use alift or secure scaffolding

2. The chain in operation may injure the user, and the user may suffer serious
   a.Do not touch the saw chain in motion.

3. The temperature of the chain in operation increases and the length becomes longer. If the chain saw cannot effectively cool down and tighten again, the saw chain may jump out of the guide plate and break, which will lead to serious injury and property damage.
   a.ensure that the chain lubricating ol is properly lubricated b. Check whether the chain saw is properly tensioned during operation. If the chain saw is loose, adjust it in time.

4. If the chain saw starts abnormally and works abnormally, the chain saw may be in an unsafe state, which may result in serious personal injury or property damage:. a, stop working and contact our dedler

5. The chain saw will produce vibration in the running state.
   a. Please put on gloves.
   b. Get some rest.
   c.In case of ill health: Consult your doctor.

6. If the running saw chain hits a hard object, it will generate sparks. Sparks can cause a fire in the presence of combustibles. These can result in serious injury and property damage. a. Do not use chain data in an environment with combustible materials.

7. When you release the trigger, the chainsaw will continue to operate for a while. Could result in serious injury
   a. Must waiit for the chain saw to stop completely.

Warning!
If the tree is tensioned, the guide may get caught. Users can lose control of the chainsaw, which can result in serious injury.Open the baffle and push forward to apply emergency brakes.

1. If the branches under the fallen tree are first cut off, the trunk will not be supported by the branches. Trees can roll, causing serious or fatal injury.
   a.Turn the main pole over before trimming the top branches.
   b. Do not stand on the log trimming operation.

Matters needing attention

1. Inexperienced personnel are prohibited from approaching dangerous logging sites, which may result in serious or fatal personal injury and property damage.
   a.Please don’t cut wood alone.

2. Branches or other objects from falling trees may fall on bystanders with the potential to cause serious or fatal personal injury or property damage.
   a. Determine the direction of the tree fall so that the tree falls cleanly.
   b. Bystanders, children, and animals are not allowed within 2.5 tree lengths.
   c. Observe the crown of the tree and the crown of the adjacent tree to ensure that there are no branches interfering with the crown when it falls.

3. When the tree falls, the trunk may break or spring at the operator. Can result in serious or fatal injury.
   a. Plan your escape route around.
   b. Observe the direction of the tree fall and escape to the planned escape route.
   c. Don’t go uphil

4. Obstacles in the workplace or on the escape route will hinder the escapee. Fleeing persons may fall, resulting in serious or fatal injury.
   Clear obstructions from work areas and escape routes.

5. If there are fixed hinges or stabilizing ropes on the trunk, the tree may fall uncontroliably and prematurely, resulting in serious or fatal injury to the operator and property damage.
   a. Do not use hinges.
   b. It is best to use a stable rope.
   c. If trees fall early: abandon logging and follow the escape route.

6. When cutting, if the guide head touches the object or the wood clips and squinches the chain, there may be abnormal rebound. Sometimes the guide head touches the object and a sudden reaction force will be formed, which will spring the guide and rush to the operator, causing injury to the operator.

7. If the tree falls in an uncontrollable direction or falls on top of other trees. The operator cannot complete the logging operation in a controlled manner. a.stop logging operations and use ropes to select suitable vehicles to pull down trees.

Warning Note of rebound (Picture 2)
The following conditions may cause derivative chainsaw to rebound

1. The head of the running chain saw guide touches a hard object or emergency brake.
2. The head of the running chain saw guide plate is touched

Tension warning (Picture 3)
When cutting from top to bottom with a guide, the chain saw pulls in the opposite direction of the operator

Propulsion Warning (Picture 4)
When cutting from the bottom up using a guide, the direction of the chainsaw thrust is in the direction of the operator If a running chainsaw touches a hard object and gets caught
The electric chain saw will suddenly detach from the operator, and the operator will lose control of the chain saw.
Causing serious or fatal injury.
Grip the chainsaw handle with both hands.
a. Operate the chainsaw as described in the instructions
b. Keep the guide pointing to cut down
c . When cutting, please cut at full speed.
Cleaning, maintenance, repair

1. In the condition of cleaning, maintenance and repair if the battery pack is not disconnec- ted from the tool, the chain saw may start suddenly. This will lead to serious injury and property damage. –
   a. Cut off the power supply.
   b. Remove the chain saw working head.
   ¢.Remove the guide plate and staple chain.

2. Corrosive cleaning agents, high-pressure cleaning equipment or sharp cleaning tools may damage the chain saw, guide plate, chain battery pack and charger. If the chain saw, quide plate, chain, battery pack and charger can not be cleaned in the correct way, the relevant parts may no longer function as they should, or the safety device no longer works, these can lead to serious injury.
   a. Clean the chain saw, guide plate, chain, battery pack and charger according to the instructions

3. If the chain saw, guide plate, chain, battery pack and charger cannot be cleaned and maintained in the correct way, the parts may no longer function as they should, or the safety devices may no longer function. These can lead to serious injury.
   a. Do not attempt to maintain and repair chain saws, battery packs, and chargers.
   b.If the chain saw, battery pack, charger need maintenance and repair: Please contact our dealer in time
   c. Follow the description of the manual to maintain and repair the guide plate and chain.

4. users in the cleaning and maintenance of the chain saw, may be sharp cutter head injury, will lead to personal injury.
   a. Please wear protective gloves.

Check items before operation
Before operation, please check the following items are normal.

1. Make sure the following parts are in safe condition.
   a. Chain saw main unit
   b. Guide plate
   c.Chain
   d. Battery pack
   e. Charger

2. Check the battery pack

3. Battery pack should be full

4. Clean the chain saw

5. Install the guide plate and chain

6. Tension the chain

7. Fill the chain oil

8. Check the system

9. Check the lube pump ol system

10. If you do not understand the above operation: Please do not use the chain saw, contact us as soon as possible [ support@olmimo.com ]

Assembly of the chain saw
Please cut off the power when performing the following operations!
Installation of guide plate and cover plate

1. Turn off the chain saw and unplug the battery pack
2. Put the chain into the groove of the guide plate
3. Move the black middie tip to the right to the middle position
4. Put the loaded chain guide plate on the main body of the chain saw, with the guide plate push button post inserted into the fixing hole on the guide plate and the right end of the chain set on the wheel
5. Drag the left end of the guide plate by hand, cover the sprocket cover plate, and tighten the guide plate clockwise to rotate (Fig. 5)
6. Check the tightness of the chain as shown in the figure to complete the assembly of the chain saw
7. switch the handle to the direction of the human body, Then then chainsaw turns on.

Checking the Chain Saw
Turn off the power when performing the following operations.
Checking the sprocket

1. Turn off the chain saw and disconnect the power supply.
2. Remove the sprocket guard cover.
3. Remove the guide plate and chain.
4. Use a depth gauge to measure the depth of the sprocket groove.
5. If the groove depth is more than 0.5mm, please do not use the chain saw anymore, contact Isupport@olmimo.com I to replace the sprocket as soon as possible.

Chain oil out of oil detection

1. Place the chain saw guide plate directly above a clean floor.

2. start the chain saw.
   Chain oil is thrown out, the oil spray can be clearly seen on the ground surface directly below the guide plate, indicating that the chain saw oil is normal.
   If no oil out can be seen:

3. Add chaiin oil.

4. Check the chain oil out again.

5. If the chain saw does not produce oil, do not use the chain saw that does not produce oil, please promptly contact Our supplier, chain oil is indispensable.

Start detection

1. Make sure there are no children or other people within 15 meters of the workplace, and keep an eye out for animals in the surrounding area.
2. Follow the following diagram: push the battery pack against the slot of the machine until the pack is locked and makes a clicking sound.
3. start the machine, press the switch trigger and the self-locking knob to see if the chain is properly tightened.

1. Confirm the escape route
a. The escape route (B) is at a 45° angle in the opposite direction of the fallen tree (A). (See Exhibit 23)
b. Make sure route (B) is clear of obstructions.
c. The top of the tree can be observed.

1. Cut off the entire width of the hawthorn opening
2. Make a dorsal cut on the dorsal side at a height slightly above the baseline of the hawthorn opening. The dorsal cut must be absolutely horizontal leaving a width of approximately 1/10 of the trunk diameter between the dorsal cut and the hawthorn opening,
3. The uncut trunk part of the tree fibers play the role of hinges, under no circumstances should the entire trunk be cut directly, otherwise it is impossible to confirm the direction of the tree tipping, timely insertion of wedges in the dorsal cut.
4. only plastic or aluminum wedges may be used to maintain the dorsal cut, and the use of iron wedges is prohibited in the open break condition.

1. Chain saw cleaning
a.Turn off the chain saw and cut off the power.
b. Wipe the body of the chain saw with a damp cloth.
c. Remove the sprocket guard,
d. Use a damp cloth to clean the sprocket periphery and the body part.
e. Use a softer brush when cleaning the battery pack charger.
f. Install the sprocket cover.
2.Clean the guide plate and chain saw
a. Turn off the chain saw and cut off the power.
b. Remove the guide plate and chain.
c. Use the brush to clean the oil outlet hole,
d. oil inlet hole and the back slot of the guide plate.
e. Clean the chain with a soft brush.
f . Install the guide plate and chain

Care and maintenance

1. Maintenance and maintenance of sprocket
   a. Users are not allowed to disassemble the sprocket by themselves.
   b. If the sprocket is damaged or defective: please do not use the equipment and contact the dealer for replacement in time.

2. Maintenance of guide plate: If there is burr on the edge of the guide plate groove, please polish it in time
   a.if you have any problem: Please contact our dedler in time.

3. Grind the chain
   Use a special round file for chain to polish the chain, not a common round file.

4. The file should only be used to polish the saw blade in one direction, but do not let the file touch the saw blade when pulling back, and polish the shortest saw blade first.
   The length of the saw blade is the reference size of other saw blades on the chain.
   a.The ircular file must match the pitch of the chain
   b. The round file is filed from the inside out.
   c. file in one direction according to the angle of the head,
   d. Please keep the angle of the cutter head cutter.
   e. Operate the cutterhead tines according to the attempt of the guide slot. (See illustration)
   f.if you have any questions, please contact our distributor.

General Safety Code for Power Tools
Read all warnings and all instructions. Failure to follow the warnings and instructions below can result in electric shock and fire or serious injury, and save all warnings and instructions for review.
The term power tool in all of the following warnings refers to either an electrically powered corded power tool or a battery operated cordless power tool.

1. Workplace Safety
   a. Keep the work site clean and bright; messy and dark sites can cause accidents.
   b. Do not operate power tools in explosive environments, such as those with flammable liquids, gases, or dust. Sparks from power tools can ignite dusts or gases.
   c. Operate power tools after children and bystanders are removed. Inattentiveness can cause the operator to lose control of the tool.

2. Electrical Safety
   a. Power tool plugs must be mated to the socket. Never modify the plug in any way. Power tools that require grounding cannot use any adapter plugs, and unmodified plugs and mating sockets will reduce the risk of electric shock.
   b. Avoid human contact with grounded surfaces, such as pipe fins and refrigerators. If your body is grounded it will increase the risk of electric shock.
   c. Do not expose power tools to rain or moisture. Water entering the power tool will increase the risk of electric shock.
   d. Do not abuse electrical cords. Never use the cord to carry or pull a power tool or unplug it.
   Keep power tools away from hot oil, sharp edges, or moving parts. Damaged or tangled cords can increase the risk of electric shock
   . When using power tools outdoors, use an external cord that s suitable for outdoor use.
   A cord that is suitable for outdoor use will reduce the risk of electric shock non-slip safety shoes, helmets, hearing protection, etc. can reduce personal injury when used under appropriate conditions.
   c. Prevent accidental start-up by ensuring that the switch is in the off position when conn- ected to the power supply or battery box, picking up o carrying tools. Fingers on a switch that has been powered on or plugged in when the switch is on may cause a hazard,
   d. Remove all adjusting keys or wrenches before the power tool is turned on. Wrenches or keys left on rotating parts of the power tool can cause personal injury.
   Do not extend your hands too far and always be aware of your foothold and balance. This allows for good control of the power tool in the event of an accident
   f . Dress appropriately and do not wear loose clothing or accessories. Keep clothing, gloves and hair away from moving parts. Loose clothing and accessories or long hair may become entangled in moving parts.
   g.If devices are provided for connection to chip collection equipment, make sure they are well connected and used properly. Use of these devices can reduce the risk of dust and debris.

3. Use of power tools and precautions
   Do not abuse power tools. Use the appropriate power tool for the purpose and choose a properly designed power tool that will make your work more efficient and safer.
   b If the switch does not turn on or off the power to the tool, the power tool should not be used. Power tools that cannot be controlled by a switch are dangerous and must be repaired,
   c. Before making any adjustments, changing accessories, or storing the power tool, it must be unplugged from the power source or the battery compartment must be disconnected from the tool. This protective measure will reduce the risk of accidental startup of the power tool,
   d. Store unused power tools out of the reach of children and do not allow anyone unfamiliar with the power tool, or who does not understand these instructions, to operate the power tool, which is dangerous in the hands of untrained users.

Rechargeable chain saw safety warning

1. When the chain saw is in working condition, keep all parts of the body at a certain distance from the chain saw. Before starting the chain saw, keep the chain away from any objects Even a momentary distraction during operation of the chain saw may result in clothing or body being caught in the chain,
2. Always hold the rear handie of the chain saw with your right hand and the front handle of the chain saw with your left hand; holding the chain saw with both hands upside down also increases the risk of personal injury. Therefore, do not use your left hand to grip the back handle and your right hand to grip the front handie.
3. Because the chain may come into contact with hidden electrical wires, only hold the insulated handle when operating the tool. I the chain comes in contact with live wires, the exposed metal parts of the tool may also be live and the operator may be electrocuted.
4. wear safety glasses and ear protection. It is recommended that further protective equipment be worn to protect the head, hands, legs, feet, etc. Wearing adequate protective clothing will reduce personal injury from flying debris or accidental contact with the chain.
5. Do not operate the chain saw in a tree. Operating a chain saw in a tree may cause personal injury.
6. Make sure to stand firmly on a secure and level surface before operating the chain saw, slippery or unstable surfaces such as ladders may cause loss of balance or loss of control of the chain saw,
7. when cutting branches under tension, please be dlert to the occurrence of bouncing, when releasing the tension on the wood fiber, the elasticity on the branch may impact the operator, or the chain saw cause it to lose control.
8. when cutting shrubs and young trees, be especially careful of thin material that may snag the chain and strike itself or cause it to become unbalanced
9. Before carrying the chain saw, you must close the chain saw and hold the front handle tightly to keep it at a certain distance from your body, when transporting or storing the chain saw, be sure to cover the guide plate cover, proper operation of the chain saw will reduce the possibility of accidental contact with the running chain.
10. Lubricate, tension the chain, and replace accessories according to instructions. Improperly tensioning or lubricating the chain may cause it to break or increase the likelihood of bouncing
11. keep the handle dry, clean, and free of oil and grease. Greasy handles are prone to slippage resulting in loss of control of the tool.
12. Use only for cutting wood. Do not use the chain saw for purposes other than those for which it was designed. For example, do not use the chain saw for cutting plastic, stone or non-wood construction materials, as using the chain saw for operations other than those for which it was designed will result in hazardous conditions.

Causes of tool bounce and precautions for the operator

1. If the head of the guide touches an object or wood pinches and squeezes the chain while cutting, it may cause a bounce to ocour.
2. sometimes the head of the guide touches an object and creates a sudden reaction force, which bounces the guide and rushes towards the operator.
3. squeezing the chain along the top of the guide may push the guide back to the operator quickly. Any of these reaction forces may cause the chain saw to lose control and cause serious personal injury.
4. Do not rely solely on the safety equipment fitted to the chain saw.
5. as a chain saw user, you should take a variety of measures to prevent accidents or personal injury during cutting operations.
6. tool mishandling, incorrect operating procedures or operating conditions will result in a rebound. Observe the cautions described below. a. Maintain a firm grip by holding the chain saw handle firmly with both thumbs and remaining fingers and adjusting body and arm position to prevent rebound forces. If the operator can control the rebound force by following proper precautions, be sure to handle with care,
   b. Do not extend the tool too far and do not cut above the shoulder. This helps prevent the head of the guide from touching the objects and better control of the tool in case of accidents.
   c. Use only the manufacturer’s specified replacement guide and chain. Using an improper replacement guide and chain may cause the chain to break or bounce.
   d. Follow the manufacturer’s sharpening and maintenance instructions for the chain, as reducing depth and height may cause frequent bouncing.

After-sales service
If you have any problem in the process of use, please contact us in time (see the next page for contact information), we have professional personnel to answer your questions and problems, so that professional maintenance personnel with the exact same replacement parts to repair power tools, so as to maintain the safety performance of power tools
Disclaimer
We reserve the right to make technical improvements to the products described in this manual, so please note any changes! If there is any discrepancy between the graphic images and text descriptions in this manual and the actual product, please refer to the actual product!

Warranty Card

Thank you for purchasing the product, in order to enable you to better experience the product, the warranty service provisions are as follows:
First, within three years from the date of purchase due to the quality of the tool defective or damage is covered by the warranty, man-made damage is not covered by the warranty; additional value-added warranty services for some goods, see the official store for details. Second, the following conditions occur during the warranty period, is not covered by the warranty.
a. improper use resulting in man-made damage
b. Damage caused by improper transportation after the product is sold
¢. damage caused by not using the company’s original accessories as required
d. Any product that has been modified and disassembled by itself
e. The replacement of easy-to-wear parts
f. Any damage caused by improper use, beyond the scope of use of tools, not in accordance with the instructions for use and maintenance.
Note: The company reserves the right to modify the above provisions and has the final interpretation of the warranty service without violating national laws

Model No.|
---|---
Product Name|
Amazon Order No.|
Amazon Store|
Shipping Address|

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>