cultsport Smartrun Carson Motorized Treadmill User Manual

Smartrun Carson Motorized Treadmill

Specifications

• Product Name: cultsport smartrun Carson Motorized
  Treadmill

• Input power voltage: 220-240V(50~60Hz)

• Motor power: 5HP Peak

• Speed: 0.8-14Km/h

• Running surface: 1200*420 mm

• Max user weight: 110KG

• Expand dimension: 17107201360mm

• Function: Running (sit up, massager, dumbbells and
  twister)

Product Usage Instructions

1. Security Precautions and Warnings

Tips: Before folding the treadmill, make sure that the gradient
is zero.

• Please read the instructions carefully before use.

• Indoor using and storing the treadmill, avoid dampness, and
  cannot be spilled by water.

• Please wear suitable clothes and sneakers before exercise.
  Prohibited to exercise on the treadmill barefoot.

• High power plug must be grounded, electric outlet should have a
  dedicated circuit, do not share with other electrical
  equipment.

• Keep children away from the machine to avoid accidents.

• Avoid too long time and overloading operation, otherwise, it
  will cause damage to motor and controller, and will accelerate the
  deterioration of bearing, running belt, and running board.

• Should maintain the machine on a regular basis.

• Keep machine away from dust to avoid strong static.

• Please cut electric power off after using.

• Please maintain good ventilation when running.

• Please clamp security lock cable on your clothing to make sure
  the machine stops at an emergency condition.

• If you feel not very well when using this machine, please stop
  and consult a doctor.

• Silicone oil must be kept away from children after use.

• If the power cord is damaged, please contact our qualified
  maintenance personnel for service rather than disassemble it at
  your own discretion.

2. Forbidden

Don’t use the machine in the status of the shell break in or
break off the internal structure exposed or under the condition of
welding-parts may fall off. Otherwise, an accident or injury may
happen.

Don’t jump up and down in the process of movement. It may cause
injury by the fall.

Don’t keep the machine in or near moisture space, such as the
bathroom.

Don’t place the machine in places with direct sunlight or high
temperature, such as near a stove or heater. It may lead to damage
to your health.

This product is suitable for domestic use and does not apply to
schools, gymnasiums, and so on.

FAQ

1. 1. Can I exercise barefoot on the treadmill?

No, it is prohibited to exercise on the treadmill barefoot.
Please wear suitable clothes and sneakers before exercise.

1. 1. What should I do if I feel unwell while using the machine?

If you feel not very well when using this machine, please stop
and consult a doctor.

1. 1. How should I maintain the machine?

You should maintain the machine on a regular basis and keep it
away from dust to avoid strong static.

1. 1. Can children use the machine?

No, keep children away from the machine to avoid accidents.

1. 1. What is the maximum user weight for this treadmill?

The maximum user weight for this treadmill is 110KG.

USER’S MANUAL
Model No: smartrun Carson
Note: Following the principles of sustainable development, we may modify machines when necessary and will not notify again. It all depends on the actual product. Always choose a treadmill that can support at least 20 more kilograms of weight than your current weight increases during running and walking

Contents
1. Product Brief ………………………………………………………………………………………………. 1 2. Security Precautions and Warnings………………………………………………………………… 2 3. Installation Instructions ………………………………………………………………………………… 5 4. Using Instructions………………………………………………………………………………………… 9 5. Routine Maintenance and Instructions………………………………………………………….. 12

1. Product Brief
Product Name: cultsport smartrun Carson Motorized Treadmill

Main technical parameters

NO.

Parameter Names

1 Input power voltage

2 Motor power

3 Speed

4 Running surface

5 Max user weight

6 Expand dimension

7 Function

Description 220-240V(50~60Hz) 5HP Peak 0.8-14Km/h 1200420 mm 110KG 1710720*1360mm Running (sit up, massager, dumbbells and twister)

Packing list

NO.

Name

1 Complete machine

2 Accessory bag

3 Side cover

4 Display console

Units set set set set

QTY 1 1 1 1

1

Accessory bag

NO.

Name

QTY NO.

Name

QTY

1 Inner hexagon wrench 6mm

1

7 Silicon oil

1

2 Inner hexagon wrench 5mm

1

8 User manual

1

3 Wrench

1

9 MP3 Cable

1

4 Screw M8*42

2

10 Sticker

2

5 Screw M8*25

4

11 Screw M8*15

3

6 Safety key

1

12

Multi-functional model accessory

NO.

Name

1 Screw M8*50

2 Screw M8*35

3 Screw M8*25

4 Lock nut M8

5 Decorative covers

6 Foam

QTY NO.

Name

QTY

2

7 Massager

1

4

8 Massager frame

1

2

9 U-shaped tube

2

6

10 Dumbbell

2

4

11 Twister

1

4

12

2. Security Precautions and Warning
Tips: Before folding the treadmill, make sure that the gradient is “zero”.
Notice Please read the instructions carefully before use. Indoor using and storing the treadmill, avoid dampness, and cannot be spilled by water. Please wear suitable clothes and sneakers before exercise. Prohibited to exercise on the
treadmill barefoot. High power plug must be grounded, electric outlet should have a dedicated circuit, do not share
with other electrical equipment. Keep children away from the machine to avoid accidents. Avoid too long time and overloading operation, otherwise it will cause damage to motor and
controller, and will accelerate the deterioration of bearing, running belt and running board. Should maintain machine on a regular basis. Keep machine away from dust to avoid strong static. Please cut electric power off after using.
2

Please maintain good ventilation when running. Please clamp security lock cable on your clothing to make sure the machine stops at emergency
condition. If you feel not very well when using this machine, please stop and consult a doctor. Silicone oil must be kept away from children after use. If power cord is damaged, please contact our qualified maintenance personnel for service rather
than disassemble it at your own discretion.
Forbidden
Don’t use the machine in the status of the shell break in or break off the internal structure exposedor under the condition of welding-parts may fall off.
—- Otherwise, an accident or injury may happen. Don’t jump up and down in the process of movement.
—- may cause injury by the fall. Don’t keep machine in or near moisture space, such as the bathroom. Don’t place machine in places with direct sunlight, or high temperature, such as near a stove or
a heating appliance. —-Otherwise, may cause the leakage and burst into flames. Don’t use when the power cord is damaged or power plug pin is loose, —-otherwise, will lead to electric shock, short circuit or fire. Don’t damage or bent by force or reverse the power cord. Don’t place heavy objects on the machine, don’t clamp the power line. —-otherwise, will cause fire or get an electric shock. People who can’t express their consciousness or operate the machine by themselves cannot use the treadmill. —-accident or injury may occur. Avoid drinking water or pouring water when operating. —- may cause electric shock and fire. Forbidden! People who seldom do exercise shouldn’t suddenly do intense exercise. After eating or when feel tired, do not use the machine.
3

—- may lead to damage to your health. This product is suitable for domestic use, does not apply to schools, gymnasium and so on.
—- Warranty voids incase the product is used apart from domestic use. Don’t use when hard objects are in clothes’ pockets.
—-may cause accident or injury. Don’t use when the power plug is on the needle, garbage, or water.
—-may cause electric shock, short circuit or fire. Do not use with wet hands! when not in use, pull out the power plug from the socket.
—-The dust and moisture can age the insulation which may lead to leakage and fire.
! Ground protection system!
This product must be grounded. If the machine is dysfunctional, grounding will provide a good channel for electric current in order to reduce the risk of electric shock.
This product is equipped with power plug with grounding conductor and plug. Complete insert the plug to standard socket.
If the equipment’s grounding conductor connection is improper, it will cause electric shock. If you have doubts about whether your product is grounded correct or not, please entrust professional to check.
Please use the socket with the same shape with the grounding plug. Don’t use plug adapter.
4

3. Installation Instructions
When installing, simple fix all screws first, then tighten screws when the installation of frame is done.
Step 1. Put the machine on the flat ground, cut the nylon cable on the base and set the upright column and console up with the direction shown as below.

Base

Frame

Step 2. Use 5# inner hexagon wrench and screw M842 to lock the base, and then use the 6# inner hexagon wrench to fix the upright column to the base with screw M825.

M8*25

M8*42

Step 3. Hold left& right columns, use 6# inner hexagon wrench to lock the console frame on the columns with screw M8*25.

Screw M8*25

5

Step 4. Take the display console out, and use combination wrench to remove the screws on the back cover. Keep the screws aside to use later.
M5x20
Above are steps of single function installation,multifunctional machine needs to be installed after you complete the steps above and then continue with the following installation. Step 5. Put two foams and four massager’s decorative covers on the U-shaped tubes.
Step 6. Use 5# inner hexagon wrench, screw M835 and lock nut M8 to lock the massage pipe on the upright column (A), and then put the decorative covers to cover the screws(B).
M835
6

Step 7. Use 5# inner hexagon wrench and screw M850 to lock the massage frame and the massage pipe, and then tighten them with lock nut M8.
M850
Step 8. Use M815 screws to fix the massager on the massage frame. Button the massage belt on the massager.
M815
Step 9. Put foams on the frame.
7

Step 10. Put the safety key on the position showing below.
Please find the red color safety key in the accessory bag. The treadmill can only start when the safety key is put in the right position.
Note: please confirm that all screws are locked uniformly according to the requirements after installation, and check no part is left out before plugging electricity.
Manual incline adjustments
To change the incline, users can adjust the incline wheel: Level 1 is the lowest level and level 6 is the highest level. Please make sure the incline level is the same on both sides.
Incline wheel
8

4. Using Instructions
Using treadmill

1. Insert the power plug properly and turn on the switch (in red color) When the light is on, there will be beep sound, and then the screen will be light up (Systems with TFT screen takes more time to enter the start interface).
   1

2. Safety key Introduction The treadmill can only start when the safety key is put on the yellow area of the console. Clip the
   safety key on clothes when using the treadmill to prevent accidents. Remove the safety key from the console can stop the treadmill immediately and put it back to continue using the treadmill. 3) Folding Instruction Fold the treadmill:
   It will save space when the treadmill is folded. Please turn off the switch and pull out the power plug before folding. Lift the running deck until it is held. Unfold the treadmill: Kick the pressure rod, hold the running deck and then let the running deck to fall gradually.
   Kick this part to lower the running deck.
   9

3. Console Instructions Amount of programs
   3 manual programs, 12 automatic programs.
   Safety lock function Disconnect the security lock, “E7” shows on the screen. The treadmill stops immediately, and a beep sound is let out. Put the safety key back, all the data will be cleared in 2 seconds. Key function Start button, Stop button When the power is on, press the start button to start the treadmill. Stop key: when the treadmill is in running state, press the stop button, all data will be cleared, and the treadmill gradually comes into a complete stop and returns to the manual mode. Program key In standby mode, pressing this key can cycle the options from manual mode to P1 to P12 automatic programs. Manual mode is the system defaulting running mode. Mode key In standby mode, press this key can cycle the options of 3 different countdown running modes. Speed + – key Use these keys to adjust the speed of the treadmill. Press + to increase the speed and press – to decrease the speed.
   Display Function
   Speed Display Display the current running speed value. Time Display Display the time of manual mode and the countdown time under automatic modes and programs. Distance display Display cumulative distance under manual mode and programs. Display the distance countdown in automatic mode. Calorie display Display cumulative calorie under manual mode and programs. Display the calorie countdown in automatic mode. Heart rate display Heart rate signal will be detected, and the heart-shaped mark flashes while testing. Heart rate measure function In the case that the treadmill is energized, hold the heartbeat sensor piece for 5 seconds, and the heart rate will be shown on the screen. The heart-shaped mark flashes while testing. This data is for reference only, it cannot be considered as medical data.
   10

Automatic program

Program

Time

1

P1

SPEED

3

P2

SPEED

3

P3

SPEED

2

P4

SPEED

3

P5

SPEED

3

P6

SPEED

2

P7

SPEED

2

P8

SPEED

2

P9

SPEED

2

P10

SPEED

2

P11

SPEED

2

P12

SPEED

2

Translation of Error Codes

Set time / 10 = Running time of each period
2 3 4 5 6 7 8 9 10 3 6 5 5 4 4 4 43 3 4 4 5 5 5 6 64 4 6 8 7 8 6 2 32 3 5 6 7 6 5 4 33 6 6 6 8 7 7 5 54 6 5 4 8 7 5 3 32 9 9 7 7 6 5 3 22 4 4 4 5 6 8 8 62 4 5 5 6 5 6 3 32 5 7 5 8 6 5 2 43 5 6 7 8 9 10 5 3 2 3 5 6 8 6 9 6 53

Error Code
E1 E2
E5

Description

Check and solution

Communication Abnormal: when the power is on, the connection between lower controller and the console is abnormal.

Check the cable connection between the console and the control border to ensure that each core is fully plugged in. Replace the connection cable if it is damaged.

No detection of motor

Possible Cause: Check the motor cable to see whether it is connected well or not,
if not, connect the motor wire again. Check the motor cable, replace it if it is damaged or has a burnt
smell.

Over current protection:

Possible Cause:

In working, the lower Overloading leads to excessive current, and the system stops out of

controller detects the current self-protection, or some part is stuck, causing the motor to stop.

to be over 6A for more than Adjust the treadmill and restart it. Check if there is liquid or burnt

3 seconds.

smell while the motor is running, if yes, replace the motor; check if

the controller has a burnt smell, if yes, replace the controller; check

the power supply voltage, if it does not match the specifications,

change into correct voltage and test the machine again.

11

E6 E7

Explosion-proof impact protection: the abnormal voltage or motor cause the faulty of circuit that drive the motor.

Possible Cause:
Check if the power supply voltage is 50% lower than normal voltage use the correct voltage and test the machine againcheckif the controller has a burnt smell and replace the controller; Check if the motor cable is connected and connect the motor wire again.

No safety key

Put the safety key on the right place.

5. Routine Maintenance and Instructions
Warning: Before cleaning or maintaining products, please be sure the power plug of the treadmill is pulled out. Cleaning: Comprehensive cleaning will extend the using life of the electric treadmill. Remove dust periodically in order to keep the parts clean. Be sure to clean running belt with both sides of the exposed portion, which will reduce the accumulation of impurities. Make sure to wear clean athletic shoes to avoid carrying the dirty matters into running board and belt. Treadmill belts shall be cleaned by a damp cloth with soap. And please pay attention to avoid to wet the electrical components and running belt. Warning: Make sure power plug disconnect before moving motor cover away, clean the motor at least once a year. Running belt specialized lubricant This electric treadmill’s running board and running belt has been lubricated in factory. Friction between the running belt and running board has a great influence to the using life and the performance of the electric treadmill, therefore regular applying of lubricant is needed. We advise you to check the board regularly. If the board’s surface is damaged, please contact our customer service center. We advise using lubricant between running belt and running board with following schedule: Lightweight user (use less than 3 hours a week) once per month; Heavyweight use (use more than 7 hours a week) once every half month. 1. In order to better safeguard your electric treadmill and extend the life of the machine, it is recommended that after your continued use of two hours, turn off the machine and let it rest for 10 minutes before using again. 2. If the treadmill belt is too loose, there will be skid phenomenon’s while running; if it’s too tight, it may reduce motor performance and harden the abrasion of roller and the running belt. You can lift two sides of the running belt for 50-75mm when the tightness is appropriate.
Running with adjusted alignment and tightness In order to better use the treadmill and make the treadmill functions work better, it is necessary for you to adjust the running belt into the best condition. Running Belt alignment Put electric treadmill flat on the ground. Make the treadmill run at a speed of about 6-8km/hour. If the running belt is closer to the right, rotate the right adjusting bolt with 1/2 turn clockwise,
12

then rotate the left adjusting bolt with 1/2 turn counter-clockwise. (Picture B) If the running belt is closer to the left, rotate the left adjusting bolt with 1/2 turn clockwise, then
rotate the right adjusting bolt with 1/2 turn counter-clockwise. (Picture A)

Picture A

Picture B

Multi-wedge Belt Tension Adjusting When you use the treadmill for a long time, the multi-wedge belt becomes loose because of the abrasion, then you have to do some appropriate adjustment to facilitate the safe use. Judgment: the feeling of running with the occasional pause phenomenon, which indicating that the treadmill belt or multi-wedge belt are a little loose and further affirmation need to be made. Method of judging which part is loose: Remove the four screws on protective cover, make the treadmill run at a speed of 1 km/h, and then stand on the running belt, grip the armrests, and tread the treadmill belt slightly. (We advise treading the treadmill belts with the user’s own weight) A. The instantaneous step cannot stop the belt, the tightness is appropriate. B. If your instantaneous step stops the running belt, but the multi-wedge belt and former roller is still running, it indicates that the running belt is loose and appropriate adjustments must be made to facilitate the safe use C. If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt stop, but the motor is still running, it indicates that the multi-wedge belt is loose and appropriate adjustments must be made to facilitate the safe use. Step 2: Use a wrench to adjust the screws on the motor base according the condition. Meanwhile, gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose, you can flip the multi-wedge belt by 100%; if it is too tight, the degree for you to flip the belt is very limited. It is appropriate to flip the multi-wedge belt by 80% after adjustment. Please adjust the tightness of the multi-wedge belt into the state that it could be flipped by 80%. Step 3: Finally lock the motor base, and install the front cover.

Silicone oil using method: Before using the treadmill, please lubricate the treadmill with the method below: A. Open the lubrication cover on the motor cover B. Squeeze the silicon oil into the oil tank of treadmill. Please make sure the oil doesn’t surpass the 90ml scale, otherwise the oil will leak out. Then put the lubrication cover back.

90ml Scale

13

Scan QR code below to download cultsport APP
cultsport tracks your Health data by connecting to your health equipment and The cultsport App tracks Exercise (steps), Calories burnt and Sleep besides other health data. We connect to most fitness bands so our customers do not need to invest on another product. cultsport certified panel of Nutritionists will interact (speak) and build customized plans for each customer. Our certified panel of Fitness Experts will build customized plans of each customer based on their equipment and age/health. We keep all your data in one place- on the cultsport app so that it can be referenced by you, your Coach or medical practitioner. Scan QR code below to download cultsport play APP
Cultsport play combines the fun of video games with the intensity of serious workouts, helping you achieve your fitness goal. Pair a cultsport play -supported Treadmill to our app, and get started today
Customer Care Support
Write to us: support@cultsport.com Web site: www.cult.fit Contact Number: 1800-572-6303/1800-572-6402 Customer Support: Monday to Saturday – From 09:00 AM- 06:00 PM
14

References

• onefitplus.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>