Donewin WR01 Wireless Charging Beside Lamp User Manual
- June 14, 2024
- Donewin
Table of Contents
Donewin WR01 Wireless Charging Beside Lamp
PRODUCT INFORMATION
Thank you for choosing our bedside lamp. Please read the instruction manual carefully to achieve the best performance of the product. For any further queries, please feel free to get in touch with us at [email protected]
Touch Control Dimming
This device is equipped with five distinct color modes. You may adjust the
lamp’s illumination by lightly touching any part of the lamp’s arm. To ensure
the integrity of the lamp’s sensitive internal components, please lightly tap
the lamp, avoiding any harsh or forceful contact.
- Single Tap : Initiates the lamp and cycles through color modes: Bright White -> Cool -> Natural -> Warm White -> Warm Yellow. After a full cycle, the lamp switches off and resets.
- Long Press: This action enables step-less adjustment of the lamp’s brightness. Hold down on any part of the lamp’s arm to incrementally change the lamp’s light intensity to your preference.
Wireless Charging
Upon powering the lamp, the wireless charging feature is available for use.
Simply place your Qi-compatible smartphone on the designated wireless charging
area to initiate charging.
NOTE:
- Ensure that your smartphone is Qi wireless charging enabled.
- The wireless charger is not designed to charge
USB Port Charging
5V1A output for all devices that have a usb port
Clock Display
Clock Brightness Adjustment:
- Ensure the clock is in its normal display mode.
- Press the “left” button once.
- Each press will cycle the brightness settings from 100% to 70% to 30%, and finally, Off.
12/24 Hour Format Selection:
- Long Press the “left” button for five seconds, the display will show 24.
- Single press the “right” button to switch between the 24-hour format “24” and the 12-hourformat “12”.
Clock Setting:
- While the clock is in its standard mode, press and hold the “left” button for five seconds. This action will take you to the time format switching mode where you can toggle between the 24-hour and 12-hour formats.
- Press the “left” button again to proceed to the hour selling. The hour digits will start to blink, indicating it’s in the hour adjustment mode.
- Use the “right” button to adjust the hours.
- Once the hours are set, press the “left” button to move to the minute setting. The minute digits will start to blink, indicating it’s in the minute adjustment mode.
- Similar to the hour setting, use the “right” button to adjust the minutes.
- After setting the minutes, press the “left” button once more to save all settings and exit the clock selling mode.
What’s included
- 1 X Bedside Lamp
- 1XAdapter
- 1X 1.2 M Cable
- 1 X User Manual
Specification
Usage Precautions
- When adjusting the lamp’s color, gently tap the lamp. Excessive force could potentially damage the internal sensitive components.
- The ambient temperature for wireless charging should not exceed 38°C/100° F. Higher temperatures may slow down the charging speed and limit power output.
- Closing background applications on your phone can significantly reduce heating issues during the charging process.
- Do not place any foreign objects, such as metal pads, magnetic cards, coins, NFC devices or other objects, between your device and the wireless charger’s surface. These could potentially disrupt the charger’s magnetic field, affect the charging speed, or cause overheating.
Safety Instructions
Warnings:
- Ensure the use of the original power cord and adapter. Extension cords or splitters may affect the product’s normal operation.
- Avoid using adapters that do not provide a direct output of 9V voltage. They may not supply sufficient power for the lamp.
- Disassembling the lamp can lead to product damage or safety risks. Refrain from doing so.
- Do not operate this product in extreme temperatures. It could compromise the lamp’s performance and lifespan.
- Protect the lamp from exposure to water and high humidity levels to prevent electrical faults and product damage.
- To clean the lamp, avoid corrosive cleaners or oil. Use a soft, dry cloth to prevent surface damage.
- The lamp’s original adapter is designed specifically for this product. II is not intended to power other devices.
- Avoid placing heavy objects on the lamp or power cord as ii could lead to damage.
- Refrain from using the lamp if the power cord or plug shows any signs of damage or fraying.
Cautions:
- The original power adapter must be used to ensure efficient wireless charging. Metal phone cases must be removed for wireless charging, as they interfere with the charging process.
- If you experience issues with charging, make sure your device is properly aligned with the charging pad.
- The lamp should be located in a cool, dry, indoor place away from direct sunlight. Keep the operating temperature between 0-38 ·c.
- Avoid using the lamp during electrical storms or power surges to prevent potential damage.
- If the lamp heats up unusually during operation, discontinue use and consult customer service.
- Refrain from placing the lamp near sources of heat or strong magnetic fields.
- Unplug the lamp if it is not in use for extended periods, to conserve energy and reduce potential risks.
Frequently Asked Questions (FAQs)
Why can't the color or the brightness be adjusted?
Ensure the lamp is placed on a stable surface and gently touch the arm of the lamp to adjust the color. Avoid applying excessive force as it might damage the lamp.
Why does the wireless charger produce some unusual noise?
All electronic devices can generate some noise when alternating current passes through their main circuit. If you notice an unusual noise, try unplugging and re-plugging the power cable or using a different power supply or cable. If the problem persists, please contact us for further assistance.
Why is wireless charging slower than charging via a cable?
The efficiency of wireless charging is approximately 70%, implying that 30% of the power is lost during the wireless transmission process. This can result in slower charging compared to wired methods.
Why does the device get hot when charging?
If your phone's screen is on and many apps, particularly GPS-using apps, are running, your phone might consume more battery power. Consequently, the wireless charger needs to work harder to maintain the battery level, which can lead to heating. Moreover, charging your phone on a hot day (above 38° C /1 00F) can also cause the battery to overheat faster.
Customer Service & Warranty Information
Thank you for choosing our lighting product. We highly value your satisfaction and are committed to providing you with quality service. Each of our lighting products comes with a 12-month warranty, effective from the dale of purchase. During this warranty period, should you encounter any issues related to the quality of the product, we are here to offer our full support.For any questions, suggestions, or further assistance, please don’t hesitate to reach out to us at the following email address:
Email : [email protected]
Our customer service team will promptly address your inquiries and provide assistance upon receipt of your message. We’ll make every effort to ensure that your concerns are resolved in a timely manner, ensuring you have a pleasant shopping experience. Thank you again for your trust and support in our products. Wishing you all the best!
FCC Information
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
EVATOST CONSULTING LTD Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR [email protected]
Firmen name : Like Sun GmbH Adresse : Planckstr.59, Essen, Nordrhein- Westfalen, 45147, Germany Email Adresse : ec- [email protected]