CHUYI SH0598-03 Handheld Vacuum Cleaner User Manual

CHUYI SH0598-03 Handheld Vacuum Cleaner

Product Information

Specifications

• Product Name: Wireless Vacuum Cleaner
• Rated Voltage: [Insert Rated Voltage]
• Rated Power: [Insert Rated Power]
• Product Size: 13.25.13.4in
• Product Weight: 1.1lb
• Dust Cup Capacity: 0.35L

Product Introduction
The wireless vacuum cleaner is a convenient and portable cleaning device designed to effectively collect dust and debris. It features a dust collection box, power switch, air outlet, handle, and charging port for easy use and maintenance.

Product Usage Instructions

Precautions
Before using the wireless vacuum cleaner, please read and follow these precautions:

1. Always ensure the rated voltage and power requirements are met.
2. Avoid using the vacuum cleaner near water or other liquids.
3. Do not disassemble the product without proper knowledge or instructions.
4. Keep the vacuum cleaner away from children and pets.
5. Do not use the vacuum cleaner with a damaged cord or plug.

Assembly and Cleaning
To assemble and clean the wireless vacuum cleaner, please follow these steps:

1. Make sure the power switch is in the OFF position.
2. Attach the desired accessory (flat mouth, long mouth, brush, or floor brush) to the appropriate connector.
3. If using the extension hose, connect it to the small hose connector.
4. Press the dust collection box release button and remove the dust cup.
5. Empty the dust cup and clean it thoroughly with water and mild detergent.
6. Allow the dust cup to dry completely before reattaching it to the vacuum cleaner.

Charging
To charge the wireless vacuum cleaner, please follow these steps:

1. Make sure the power switch is in the OFF position.
2. Connect the provided USB charging line to the charging port of the vacuum cleaner.
3. Plug the other end of the USB charging line into a 5V 2A power adapter or car charger.
4. Allow the vacuum cleaner to charge until the battery is full. The charging time may vary.

Accessories Installation and Use
The wireless vacuum cleaner comes with several accessories for different cleaning tasks. Please follow these instructions for installation and use:

• USB Charging Line
  Use the provided USB charging line to connect the vacuum cleaner to a power source for charging. Make sure to handle the charging line with care and avoid any damage to the cord.

• Flat Mouth and Long Mouth
  The flat mouth and long mouth accessories are designed for cleaning narrow and hard-to-reach areas. Attach the desired accessory to the appropriate connector on the vacuum cleaner for efficient cleaning.

• Brush
  The brush accessory is suitable for cleaning surfaces such as upholstery, curtains, and keyboards. Attach the brush to the appropriate connector on the vacuum cleaner and gently brush the surface to remove dust and debris.

• Floor Brush
  The floor brush is designed for cleaning larger areas such as floors and carpets. Attach the floor brush to the appropriate connector and glide it over the surface to effectively collect dust and dirt.

• Extension Hose
  If additional reach is required, use the extension hose. Connect one end of the extension hose to the small hose connector on the vacuum cleaner and attach the desired accessory to the other end. This allows you to clean areas that are further away or difficult to access.

FAQs

Q: How often should I clean the dust cup?
A: It is recommended to empty and clean the dust cup after each use or when it reaches its maximum capacity. Regular cleaning ensures optimal performance and prevents clogging.

Q: Can I use the vacuum cleaner while it is charging?
A: No, it is not recommended to use the vacuum cleaner while it is charging. Please wait until the battery is fully charged before using it.

Q: How long does it take to fully charge the vacuum cleaner?
A: The charging time may vary depending on the battery level and the power source. It is recommended to allow the vacuum cleaner to charge until the battery is full, which may take a few hours.

Precaution

1. Do not dismantle, repair or refit this product unless authorized repairman is responsible for it.
2. Do not cover the air inlet or outlet when operating the product, otherwise the product may be deformed or catch fire due to overheating.
3. Do not inhale combustibles, such as cigarette ends, when using this product.
4. Please keep this product away from children.
5. Do not clean the product with severely corrosive liquid, such as Tianna water, paint, etc.
6. If the vacuum cleaner has no dust collecting bin and filter screen, or is damaged or partially damaged, please do not use it and replace it in time, otherwise the product will be damaged.
7. Before charging, please make sure that the switch is closed. It is strictly forbidden to use it while charging.

Instruction

1. Connect the charger to fully charge the battery (the charging indicator is red; when fully charged: the charging indicator is green.)
2. Connect the corresponding accessories according to the use situation (the accessories are installed and used)
3. Turn on the power switch of the vacuum cleaner and start to work

Product parameter

Product introductio

1. Dust collection box
2. Haipa
3. Power switch
4. Handle
5. Air outlet
6. Charging port

Parts

Accessories installation and use

How to use the hose with Connectors

Multi-Purpose Suction Head

Disassembly and cleaning

1. Rotate the dust bin counter clockwise to remove the dust bin from the fuselage
2. Take out the Haipa filter in the dust bin and dump the garbage into the dustbin to remove the dust bin from the fuselage
3. If necessary, clean the dust cup with a micro wet cloth or disposable paper towel. The filter screen can be washed with water. After washing, it must be completely dried and then used again
4. Reinstall the dust bin, put the hyper filter net into the dust bin, rotate it in the opposite direction according to step 1, and tighten it.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>