RAZER Wolverine V2 Chroma User Manual

RAZER Wolverine V2 Chroma

INFORMATION

The Razer Wolverine V2 is a gaming controller designed for Xbox consoles and PC. It features Razer’s Mecha-Tactile Action Buttons and D-pad for a responsive and tactile gaming experience. The controller also has six additional remappable buttons, allowing for customizable controls to suit individual preferences and gaming styles.

If there is a Chroma version released after my last update, it’s likely to include Razer’s Chroma RGB lighting technology, allowing users to customize the controller’s lighting effects and colors through Razer Synapse, the company’s software platform. To get the most accurate and up-to-date information about the Razer Wolverine V2 Chroma, I recommend checking the official Razer website or contacting Razer’s customer support.

Troubleshooting

• If you encounter issues, consult the user manual or visit the Razer support website for troubleshooting guides.

USING INSTRUCTIONS

1. Connect the Controller:
   • For Xbox: Connect the controller to your Xbox console using the provided USB cable or the Xbox Wireless Adapter if applicable.
   • For PC: Connect the controller to your PC using the USB cable.
2. Install Razer Synapse:
   • Download and install Razer Synapse, which is Razer’s software for customizing and configuring their peripherals.
3. Update Firmware (if needed):
   • Check for firmware updates for the controller through Razer Synapse and install any available updates.
4. Customize Buttons and Lighting:
   • Open Razer Synapse and navigate to the section related to your controller.
   • Customize button mappings according to your preferences.
   • If your controller has Chroma lighting, you can customize the lighting effects using the Chroma Studio in Razer Synapse.
5. Calibrate Thumbsticks (if needed):
   • Some controllers allow you to calibrate thumbsticks for better accuracy. Check for this option in the settings.
6. Configure Additional Features:
   • Explore any additional features specific to the Wolverine V2 Chroma, such as additional buttons or unique functions.
7. Save Settings:
   • Make sure to save your settings in Razer Synapse so that they are applied every time you use the controller.
8. Check for Updates:
   • Periodically check for firmware or software updates for both the controller and Razer Synapse to ensure optimal performance.

Please note that these instructions are general guidelines, and the specific steps might vary based on the features of the Razer Wolverine V2 Chroma.

 FAQ

How do I set up the Razer Wolverine V2 Chroma?

Xbox

1. Connect the controller to Xbox using the USB-C to USB-A cable.
2. Press the Xbox button to begin using your controller on Xbox.

PC

1. Connect the controller to a PC using the USB-C to USB-A cable.
2. Wait until the controller’s drivers are automatically installed. You can also manually update the drivers through Device Manager.

How do I adjust the game and chat audio on the Razer Wolverine V2 Chroma?

To increase or decrease the master volume:

1. Press and hold the Audio Configuration button.
2. Press the Up or Down directional button.

To increase or decrease the voice chat and game volume:

1. Press and hold the Audio Configuration button.
2. Press the Left or Right directional button

How do I change the thumbstick caps on the Razer Wolverine V2 Chroma?

1. Pull out the installed magnetized thumbstick cap.
2. Line up the new one and slot it in.

How do I remap or disable multi-function buttons on the Razer Wolverine controller?

1. Select your profile then “Edit”.
2. Select “Assign Buttons”.
3. Select the button you want to edit.
4. Select a new function.
5. Select “Done” once re-mapping is complete.

How do I enable or disable the Trigger stopwatches on the Razer Wolverine V2 Chroma?

1. Slide the Trigger stop switches outward to enable.
2. Slide the Trigger stop switches inward to disable.
   Trigger stop switches shorten the travel distance and response time (Active Hair Trigger Mode) of the left and right triggers

How can I use my wired 3.5mm headset with the Razer Wolverine V2 Chroma?

Plug the headset into the 3.5 mm analog port found at the bottom of the controller.

How do I clean my Razer controller?

1. Unplug your controller.
2. Use a lint-free microfiber cloth with an alcohol-based cleaning solution.
3. Wipe the surface of your controller.
4. Use compressed air to blow dust away from the controller’s hard-to-reach areas.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>