kb ce FDFD10501 Series 4 in 1 Countertop Ice and Water Dispenser Instruction Manual

kb ce FDFD10501 Series 4 in 1 Countertop Ice and Water Dispenser

Product Information

The 4 in 1 Countertop Ice & Water Dispenser is a versatile appliance designed to provide both ice and water conveniently. It is equipped with various features and specifications to ensure safe and efficient operation. The dispenser is manufactured by KB Good Ice and the model number is FDFD10501.

Product Usage Instructions

Before using the dispenser, please read and follow these instructions:

1. Let the unit rest and remain unplugged for 24 hours before use.
2. Remove all external and internal packaging materials, ensuring that all parts are included before discarding any packaging.
3. If the power cord is damaged upon receipt, contact customer service at 800-433-9938 or email info@kbgoodice.com for a replacement.

SAFETY INSTRUCTIONS

Electrical Safety
DANGER : Improper use of the power cord plug can result in the risk of electrical shock, property damage, and personal injury or death. Follow these guidelines:

• This appliance is equipped with a 3-prong grounding-type plug, and shall be plugged into a properly connected grounding- type outlet.
• It is required to use a 3–prong grounding-type electrical outlet properly grounded in accordance with the National Electrical Code and local codes and ordinances.
• A separate adequately fused and grounded circuit shall be used for this appliance. The voltage rating must match the rating label on the unit.
• Do not use an adapter or an extension cord.
• Do not under any circumstances cut or remove the third ground prong from the power cord.
• Never unplug the appliance by pulling the power cord. To disconnect the unit, always grip the plug firmly and pull straight out from the wall outlet.
• Do not operate the appliance if the appliance housing is removed or damaged.
• Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual. All other servicing shall be referred to a qualified technician.
• To protect against electric shock, do not immerse appliance, plug or cord into water or other liquids.

Child Safety
Exercise caution and supervise children when the appliance is in use. Follow these precautions:

• Exercise caution and use reasonable supervision when appliance is used near children. Never allow children to operate, play with or crawl inside the unit. Keep packing materials away from children.
• Keep fingers out of pinch point areas and be careful when closing doors if children are around.

Hot Water Safety
DANGER: Hot water can cause serious injury. Follow these safety measures:

• To avoid hot water spilling, always put a cup under the dispenser before you press the button to dispense hot water.

Cleaning Safety
DANGER: To reduce the risk of injury during cleaning, adhere to these precautions:

• Unplug the appliance or disconnect power before performing any maintenance or cleaning.
• Do not clean appliance with flammable fluids. Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other unit. The fumes can create a fire hazard or explosion.
• Do not use solvent-based cleaning agents or abrasives on the interior or exterior of the appliance. These cleaners may damage or discolor the appliance.
• Do not operate the appliance with wet hands, while standing on a wet surface or while standing in water.

Moving Safety
DANGER
To reduce the risk of injury when moving your appliance, follow these basic precautions.

• Exercise caution when moving and installing the appliance. The unit is heavy, to prevent strain or injury, it may require two or more people to move the unit.
• Remove all ice, empty water and secure all loose accessories before you transport the unit. Use protective materials to prevent the glass shelves from being damaged.

Disposing Safety
DANGER
When disposing of refrigeration appliances, special handling is often required. It is the consumer’s responsibility to comply with federal and local regulations when disposing of this product.

• Keep the carton, plastic bags and any exterior wrapping materials in a safe place where children cannot reach them. If you don’t need these materials, destroy or recycle them. These items may cause suffocation to children.
• To avoid entrapment and suffocation, before you discard this appliance, remove the doors and leave the shelves in place, so that children may not climb inside.

For any further information or assistance, please contact KB Good Ice customer service at 800-433-9938 or email info@kbgoodice.com.

FEATURES & SPECIFICATIONS

Overview

This is a great appliance to help you prepare hot or cold beverages and drinks. The countertop ice and water dispenser is an innovative design that combines cubed and crushed ice with hot and room temp water in a single compact product. The freezer keeps 10 lbs. of crescent ice cold and available anytime. POU filtered water system creates the flexibility to place it anywhere in the office, break room, hotel and home. Stainless or black doors with silver accents give a sleek and modern appearance.

Features and Parts

1. Freezer Door
2. Ice maker (located inside)
3. Ice Bin (located inside)
4. Display Panel
5. Ice and Water Dispenser
6. Trip Tray
7. Water Line Connector
8. Water Release Drain
9. Condenser Fan
10. Power Cord

• The dispenser allows you to enjoy cubed or crushed ice and hot or iced water with the touch of a button.
• The two-evaporator cooling system and the ice freezer keep ice from melting and produce ice quicker.
• Hot-gas defrost system makes the unit frost-free and maintenance free.
• POU filtered water provides you with clean and great tasting water.
• Adjustable temperature hot water brings more precise to your hot favorite recipes.
• Touch control brings you the simplicity to select and dispense your preferred types of ice or water.
• Blue display and bright LED lights make it easy to use anytime and attractive to display anyplace.
• On/Off buttons save energy and give you the flexibility to use ice and hot water.
• Automatic alerts for water and filter will not allow you to run out of water or leave water contaminated.
• Child safety design protects your children from burning.

Specifications and Dimensions

lbs. / 24 h
Ice Bin Capacity| 10 lbs.
Defrost Type| Automatic
Water Type| Hot and Room Temp
Hot Water Temperature| Adjustable 122~192 °F
Hot Water Capacity| 1.8 L
Operating Temperature for Ice| 50~110 °F
Water Supply| POU Filtered Water
Electrical Rating| 115V/60HZ/5.6A
Unit Dimensions| 18-1/8”W x 22-3/8”D x 31-1/2”H
Depth w/ Door Open 90 Degree| 39-3/8”
Net Weight| 90 lbs.

CONTROL & DISPENSER

DANGER
Hot water can burn your hands and body and cause serious injury.
CAUTION
Do not store food and drink in the ice freezer.
NOTE

• For the first time use, allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.
• For the first time use or after connecting a filter water source or after replacing the water filters, flush the water system by dispensing several cups of water, then discarding them. Repeat this until water is clear and tasting good.

Indicator and Display Functions

Use of the Dispenser

• Once the unit is powered, the ice and hot water functions will be turned on and “ON” green LEDs will light accordingly.
• The water inlet valve opens immediately to let water flow into the internal water reservoir.
• Once the internal water reservoir is full, the ice maker and water heater will start working immediately. If the water reservoir is not filled with water within 4 minutes, the “Low” indicator will appear, and the water inlet valve, water heater, ice maker and water dispensing will stop working.
• While the water heater is on, the “Heating” indicator will appear and the water temperature will be displayed.
• The cooling system will start working in 5 minutes. The cooling system will stop working automatically when ice is being ejected.

Adjusting the hot water temperature
Hot water temperature setting buttons

• Press “+” or “-” button once to enter temperature setting mode, the temperature display will start flashing and show the current setting.
• Press “+” or “-” button once to adjust temperature in 1 degree increment or decrement, or press and hold “+” or “-” button until the proper temperature is displayed.
• Once “+” or “-” button is released for more than 3 seconds, the new setting will be saved and the current hot water temperature will be displayed.

Turning on/off the ice maker function
Ice maker function button

• Press and hold the “Ice making” button for more than 3 seconds to turn the ice maker off or on, the “OFF” red LED or the “ON” green LED will light.

Turning on/off the hot water function
NOTE
Normally the hot water function should be turned off to save energy.
Hot water function button

• Press and hold the “Water heating” button for more than 3 seconds to turn the hot water off or on, the “OFF” red LED or the “ON” green LED will light.

Turning on/off the light
Light button

• Press the “Light” button once to turn the light on. The light will automatically turn off in 5 minutes; press the button again to turn it off.

Dispensing hot water
NOTE
If the “Hot” button is pressed without unlocking, continuous short beeps will be heard. The “Hot” button will be locked automatically if it has been pressed for more than 40 seconds or once the button is released.
Hot water dispensing button
Hot water unlocking button

• Place a cup under the water dispenser.
• Press the “Unlock” button once. You will hear a long beep indicating the “Hot” button is unlocked.
• Then press and hold “Hot” button within 5 seconds to dispense hot water.

Dispensing room temp water
NOTE
Water will stop dispensing automatically if the “Ambient” button has been pressed for more than 40 seconds.
Room temp water dispensing button

• Place a cup under the water dispenser.
• Press and hold the “Ambient” button to dispense room temp water.

Dispensing ice
NOTE
Ice does not dispense while the freezer door is open.
If ice cubes haven’t been used for days, they may freeze together and unable to dispense. If this happens, pull out the ice bin and shake it, then push it in.
Dispensing cubed ice
Cubed ice dispensing button

• Place a cup under the ice dispenser.
• Press and hold the “Cubed” button to dispense cubed ice.

Dispensing crushed ice
Crushed ice dispensing button

• Place a cup under the ice dispenser.
• Press and hold the “Crushed” button to dispense crushed ice.

Resetting Water inlet valve
When “Low” indicator appears, the water inlet valve, water heater, icemaker and water dispensing will stop working automatically.

• Activate the water inlet valve by pressing and holding “Light” button for more than 3 seconds until the “Low” indicator flashes.

Replacing water filters
CAUTION
All water filters must be replaced at the same time. The filters should be replaced at least once a year.
When “FLr” flashes, replace the water filters immediately.

• Reset the “FLr” status by pressing and holding “Light” and “+” buttons for more than 6 seconds until you hear a long beep and “FLr” disappears.
• Dispense several cups of water to flush the system until water is clear.

Turn off the cooling system
NOTE
You may turn off the cooling system if you use only water dispenser. Please remove all ice before you turn it off.

• Press and hold both “Light” and “-” buttons for more than 6 seconds until “OFF” flashes.
• Press “Light” button within 10 seconds to stop flashing for confirmation.

DISPENSER CARE

DANGER
Unplug the unit or disconnect power before performing any maintenance.
CAUTION
If ice cubes block the feeler arm, clear the ice cubes before you pull out the ice bin.
Move the feeler arm up and keep it above the ice bin while you pull out the ice bin. Otherwise the feeler arm may be damaged if it is obstructed by the ice bin. How to empty ice bin

• Use the instructions below to remove the ice bin when emptying ice or cleaning the ice bin.
• Push the ice bin back until the auger is engaged in the auger coupler. If it is stuck, rotate the auger 1/8 turn, then push it in again.

How to release water
Use the water release drain located at the back of the unit to release the remaining water.
If the dispenser does not dispense water

• Air may be trapped.
• Release a cup of water from the water release drain.

How to remove condensate

• The unit is operated with automatic defrost cycle. The water collects in a condensate drip tray that is located at the compressor compartment. Normally, the water evaporates through the hot gas tubing.
• In very high humidity conditions, manually empty water if the tray is full.

How to clean the water system with citric acid if heavy sediment has built

• Fill a 5 gallon bottler with cold water and add 8 oz of citric acid powder.
• Insert a ¼” OD tube to the line connector located at the back of the unit, and insert another tube end into the bottle near the bottom.
• Place the bottle above the unit so the water in the bottle can flow into the internal water reservoir by a siphon.
• Wait for hot water ready. Dispense both hot and room temp water to flush the system. Repeat this procedure until the bottle is empty.
• Release the remaining water through the release drain.
• Fill the container with clean cold water.
• Dispense both hot and room temp water to rinse the system until water is clear
• Release the remaining water.

When the “Low” indicator appears

• Check if the water supply line is broken or the water inlet valve is defective; check all water tubes for leakages.
• Activate the water inlet valve by pressing and holding “Light” button for more than 3 seconds until the “Low” indicator flashes.

If heavy frost builds up in the freezer

• Press and hold the “Hot” button for more than 10 seconds until dEF is displayed and flashing. dEF will stop flashing when the defrost cycle starts.
• Once the defrost cycle is complete, the hot water temperature will be displayed.

If ice cubes are frozen together

• Press the “Cubed” or “Crushed” button to dispense ice for a few minutes.
• Open the upper door and pull out the ice bin to shake it or remove the large clumps of ice cubes.

If the ice bin is stuck

• Unplug the unit.
• Use a hair dryer with warm or cold air to melt the ice.
• Pull out the ice bin and empty it.
• Wipe up water and put the ice bin back.
• Plug in the unit.

If ice cubes are jammed in the ice maker

• Unplug the unit.
• Use a hair dryer with warm or cold air to melt the jammed ice cubes.
• Then remove the jammed ice cubes.
• Plug in the unit.

If a power outage happens

• Unplug the unit.
• Pull out the ice bin and empty it.
• Wipe up water and put the ice bin back.

If you are away on holidays or vacations

• Unplug the unit or disconnect the power.
• Open the upper door
• Pull out the ice bin and empty it.
• Let the freezer defrost.
• Wipe up water and dry the freezer.
• Release the remaining water.

What normal operating sounds you may hear

• You may hear a boiling, rattling or gurgling sound produced by flow of refrigerant through the evaporator.
• You may hear air being forced through the unit by the evaporator fan.
• You may hear air being forced through the condenser by the condenser fan.
• You may hear a clicking sound produced by the refrigerant valve or dispensing valve.
• You may hear a water dripping sound during automatic defrost cycle.
• You may hear a high pitched hum or pulsating sound produced by the compressor.
• You may hear the ice cubes being ejected from the ice maker to the ice bin.

INSTALLATION INSTRUCTIONS

Location
CAUTION
This unit is designed for indoor use only.

• Place the unit away from direct sunlight and heat sources.
• Do not install the unit in moist areas.
• Do not install the unit in garage.
• Do not install the unit where the ambient temperature range will be below 50 °F or above 110 °F. Otherwise, the compressor will not be able to maintain proper temperature.
• The unit must be placed in a properly ventilated location to prevent heat build-up generated by the refrigeration system. Failure to do so will prevent the unit from cooling properly, and may result in damage to unit components as well as its contents.
• The unit must be installed on a counter that is level and strong enough to support a fully loaded unit up to 100 lbs.

Clearance
CAUTION
This unit is designed for free-standing or recessed installation.

• Allow for minimum 2” on the back, and 1” at the top for proper air circulation.
• If the unit is installed next to a fixed wall on the right side, leave 1” minimum clearance to allow the door to swing.
• Adjust the levelling legs to level the unit at a height that allows the door to be opened and closed properly.

Electrical Requirements
DANGER
It is required that you connect this unit only to a GFCI protected receptacle. It is strongly recommended that you do not use an adapter or an extension cord to connect this unit because of potential safety hazards.

• A dedicated 120V, 60Hz, 15A fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your appliance be provided.
• Only connect to properly polarized outlets.
• Use outlets that cannot be turned off by a switch.
• Only plug the unit into a grounded 3 prong outlet.

How to insert or disconnect a tube or plug

1. Remove the lock clip first.

2. To install, insert a tube or plug until it is engaged;
   To disconnect, press the release ring down and pull out a tube or plug.

3. Install the lock clip.

Filtered water line installation
NOTE
A municipal water supply or other potable water with water pressure between 20 and 120 psig is required to operate this unit. Drain is not required.

• Remove the plug of the filtered water line connector (7), which is located at the back of the unit. Insert the filtered water line into the water line connector (7) until it stops.

TROUBLESHOOTINGS

Chart

• Power cord is unplugged.
• No power at outlet.
• Power cord is broken.
• Control PCB is defective or with wiring problems.
• Display PCB is defective or with wiring problems.

|

• Plug in the power cord.
• Check for outlet and breaker or fuse.
• Call for service.
• Call for service.
• Call for service.

“Low” indicator appears (internal water reservoir is at low water level, to reactivate the water inlet valve, press and hold “Light/Reset” button for more than 3 seconds)|

• Filtered water supply is turned off or line is broken.
• Air is trapped. ****
• Internal water tubes are loose, kinked or broken.
• The water inlet valve is defective or with wiring problems.

|

• Fix it. ****
• Release cups of water from the water release drain.
• Call for service.
• Call for service.

Icemaker is not producing ice|

• Water level is low and “Low” indicator appears.
• There is ice in the ice mold, but the ice maker is turned off.
• There is ice in the ice mold, but ice cubes are jammed.
• The ice mold is empty and the water fill tube freezes.
• The ice mold is empty and the water filters are clogged.
• The ice mold is empty and the ice maker water pump is defective or with wiring problems.
• The ice mold is empty and the ice maker is defective.
• The ice mold is empty and the cooling system is defective.
• There is ice in the ice mold, but the ice maker is not turning.
• There is water in the ice mold but the cooling system is not working.

|

• See “Low” indicator appears. ****
• Turn the ice maker on.
• Clear the ice cubes.
• Unplug the unit and remove the ice bin then wait until fill tube is clear.
• Bypass the water filters and check if ice quality improves.
• Call for service.
• Call for service.
• Call for service.
• Call for service.
• Call for service.

Icemaker is not producing enough ice or ice cubes are small|

• The freezer door is not closed properly.
• The ice chute flap is not closed properly
• Air is trapped in the ice maker water line and the ice mold is not filled with sufficient water.
• The ice maker water pump is not working properly.
• The ice maker is not working properly.

|

• Check for the door seal and door opening.
• Check for the flap.
• Release cups of water from the water release drain.
• Call for services.
• Call for service.

| The cooling system is not working properly.| Call for service.
---|---|---
Ice cubes are hollow|

• The icemaker thermostat is defective.
• The icemaker water pump is defective.
• The cooling system is not working properly.

|

• Call for service.
• Call for service.
• Call for service.

Ice cubes are frozen together in the ice bin|

• If ice cubes haven’t been used for a long period of time, they may freeze together.
• Ice cubes are produced continuously because the feeler arm is blocked up.
• The freezer door is not closed properly.
• The icemaker is not working properly.
• The cooling system is not working properly.

|

• Pull out the ice bin and shake it or remove the large clumps of ice cubes.
• Clear ice cubes around the feeler arm.
• Check for the door seal or door opening.
• Call for service.
• Call for service.

Crushed ice does not dispense|

• There are not enough ice cubes in the ice bin.
• Ice cubes are frozen together in the ice bin.
• The freezer door is open.
• The freezer door magnetic switch is defective.
• The auger motor is broken.
• The flap motor is broken or with wiring problems.
• Control PCB is defective or with wiring problems.
• Display PCB is defective or with wiring problems.

|

• See Icemaker is not producing ice or Icemaker is not producing enough ice or ice cubes are small.
• Pull out the ice bin and shake it or remove the large clumps of ice cubes.
• Close it.
• Replace it.
• Call for service.
• Call for service.
• Call for service.
• Call for service.

Cubed ice does not dispense|

• There are same problems as crushed ice.
• The solenoid is defective.

|

• See Crushed ice does not dispense.
• Call for service.

Hot water is not hot|

• The water heater stops working automatically when “Low” indicator appears.
• The hot water function is turned off.
• The water heater is broken.
• The thermostat is defective.

|

• See “Low” indicator appears.
• Turn the hot water function on. ****
• Call for service.
• Call for service.

Hot water is not hot enough| The thermostat is defective.| Call for service.
Hot water heater smells burning| The hot water tank is dry burning.| Call for service.
Water does not dispense|

• The water dispensing valve stops working automatically when “Low” indicator appears.
• Air is trapped.
• The dispensing valve water tubes are broken.
• The water dispensing valve is defective.
• Control PCB is defective or with wiring problems.

|

• See “Low” indicator appears.
• Release cups of water from the water release drain.
• Call service.
• Call service.
• Call service.

| Display PCB is defective or with wiring problems.| Call service.
---|---|---
Water dispenser is slow|

• The water dispensing tubes are kinked.
• The water dispensing valve is defective.

|

• Straighten them.
• Call service.

Water is leaking|

• The dispenser drip tray is full.
• The condensate drip tray is full.
• The internal water reservoir or tubes are leaking.
• The water level sensor of the internal water reservoir is defective.
• The water dispensing valve is defective.
• Ice is being melted because of high freezer temperature.

|

• Empty it.
• Empty it.
• Call for service.
• Call for service.
• Call for service.
• Check for power or call for service.

Icemaker evaporator is iced|

• The freezer door is not closed properly.
• The ice chute flap is not closed properly.
• Water fill tube is leaking water.

|

• Close it.
• Close it.
• Align the fill tube in the fill cup.

Both freezer and icemaker evaporators are iced|

• The defrost solenoid valve is defective or with wiring problems.
• The defrost drip tray heater is broken or with wiring problems.
• The evaporator fan is broken.
• The defrost sensor is defective.
• The freezer sensor is defective.

|

• Call for service.
• Call for service.
• Call for service.
• Call for service.
• Call for service.

Codes

service
E05| Water level float switch| Turn off heater & Call service
E06| Freezer door is open| Close door
E07| Ice maker| Call service
E08| Display board or control board| Call service
E09| Freezer temperature extremely high| Disconnect power & Call service
E10| Freezer temperature high| Disconnect power & Call service

SERVICE & IMPORTANT NOTICE
The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice.
Contact us with any questions at 800-433-9938 or info@kbgoodice.com
https://fd-appliances.com/
https://www.kbgoodice.com/

LIMITED WARRANTY

Seller warrants that the goods will be free of defects in materials and workmanship for a period of 12 (twelve) months from date of sale, removal and re-installation of unit is not included in warranted labour. For a scratch and dent or refurbished unit, warranty is 3 months from your dated invoice (parts for function only, not cosmetic). There is no warranty on parts purchased separately. Purchaser’s exclusive remedy is limited, at Seller’s option; to repair or replace defective part[s] with either new or factory reconditioned part[s]. Purchaser is responsible for shipping the unit pre-paid to designated facility and Seller will pay return shipping charges in the continental United States for items repaired under warranty within 12 (twelve) months from date of sale. Improper placement of the unit will void the warranty. This limited warranty does not cover damage due to such things as accident, misuse, abuse, mishandling, neglect, acts of God, fires, earthquakes, floods, high winds, government, war, riot or labour trouble, strikes, lockouts, delay of carrier, unauthorized repair, or any other cause beyond the control of the Seller, whether similar or dissimilar to the foregoing. Seller is not responsible for any damages caused to Seller’s property resulting from the good. This limited warranty applies only inside the Continental US. (Alaska, Puerto Rico and Hawaii are not warranted.)
Seller is not responsible for incidental or consequential damages, and there are no warranties, expressed or implied, which extend beyond the Limited Warranty described above. The implied warranties of merchantability and of fitness for a particular purpose are hereby expressly disclaimed. Some states do not allow the exclusion of incidental or consequential damages, or a waiver of the implied warranties of fitness and/or merchantability, so the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. In the event of any dispute between Seller and Purchaser arising out of or relating to these terms and conditions or to the goods sold generally, Purchaser must first file a written claim with Seller within ten days of the occurrence giving rise to the claim and wait an additional thirty days for a response before initiating any legal action. In no event may Purchaser initiate any legal proceeding more than six months after the occurrence of the event giving rise to the dispute.
The above terms and conditions are the only ones governing this transaction and Seller makes no oral representations of any kind. These Terms and Conditions can only be modified in writing, signed by both Purchaser and Seller.
KBICE is a registered trademark of Flurida Appliances Inc. All products, features, and services are subject to change without notice. We cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
Copyright©2022 Flurida Appliances Inc. All rights reserved.

References

• FD Appliances – Solution For Household Appliances
• KB!ce™ Self-dispensing Nugget Ice Maker

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>