Cordless Screwdriver B1MREAMR29L Portable Electric Screwdriver User Manual
- June 14, 2024
- Cordless Screwdriver
Table of Contents
Cordless Screwdriver B1MREAMR29L Portable Electric Screwdriver
Controls and Components
Pistol Driver:
- Keyless Chuck
- Led Battery Indicator Lights
- Charging Port
- Forward/Reverse Switch
Charging the Battery
- Be sure to place the tool on a clean dry surface within 3 feet (1 meter) of a 110-240V(AC)/ S0HZ/ 60HZ wal I receptacle.
- Insert the AC adaptor into the Charging Port located on the back of the unit.
- Plug the AC adaptor into the closet wall outlet.
- Allow 2 to 3 hours for the battery to become fully charged.
- Disconnect the unit after charging as the unit should be ready for use.
- The LED battery level indicator should be able to tell you the amount of charge that you have on the battery.
Operation
- Insert the bit into the chuck until it snaps into place.
- Grasp the tool firmly with both hands, align the bit with the screw, and press it firmly into the screw.
- Start the tool by squeezing the Forward/Reverse Trigger switch .*Press the top of the switch to turn the screw Forward, and Press the bottom of the switch to Reverse the screw.)
Troubleshooting Tips
- Press the LED battery level indicator and be sure that the unit is fully charged.
Maintenance
- Use only mild soap and a damp cloth to clean the tool.
- Do not allow any liquids to get inside the tool.
- Do not immerse any part of the tool in liquids.
Specifications
Pistol Driver:
- Voltage: 3.6/4.8 Volts(DC)
- Torque: 3 N.m
- Speed (no load): 250 RPM/Min
AC Adaptor:
- Input: 110-240 Volts(AC)/50 Hz/ 60Hz
- Output: 5/6 Volts(DC)/1 300mA
- Charging time: 2-3 hours (max 7 hours)
- LpA: 63 dB(A)
- LwA: 74 dB(A)
- Vibration: 2 2.5 m/s
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>