FERRISA HDSW0040M1 8K HDR HDMI Audio Extractor User Manual
- June 14, 2024
- FERRISA
Table of Contents
FERRISA HDSW0040M1 8K HDR HDMI Audio Extractor
FEATURES OF THE INTERFACE
| No. | Description | Introduction |
|---|---|---|
| ① | Mini USB port | Only for factory upgrade |
| ② | HDMI input indicators | The selected input channel indicator will light up. |
| ③ | HDMI output indicator | Lighting when HDMI OUTB has signal output. |
| ④ | ARC status indicator | Lighting when ARC on. |
| ⑤ | IR receiving window | Receive the commands sent by the infrared remote |
control.
⑥| EDID mode indicators| Include three audio EDID modes : PASS/2CH/5.1CH
⑦| Automatically detect status indicator| Lighting when automatic detect is
enabled
⑧| automatic detect on/off key| Signal source input automatic detect function
enabled or disabled.
⑨| Input selection key| Loop to select the input channel of HDMI
⑩| ARC on/off key| HDMI ARC (Audio return channel) function on/off.
⑾| EDID mode selection key| Support three audio EDID mode switching
:PASS/2CH/5.1CH.
⑿| Power status indicator| Lighting when power on.
⒀| Power switch| Power self – lock switch, turn on when pressed, turn off when
bounced.
Picture 1.1 rear panel showing
| No. | Description | Introduction |
|---|---|---|
| ① | Power jack | Requires 5V power supply |
| ② | HDMI output port B | Connects to monitor with HDMI port. This port supports |
audio & video output and ARC.
③| HDMI output port A| Connects to Sound equipment with HDMI input port.
This port only outputs audio signals.
④| HDMI input port 4| Connects to your source device by HDMI cable.
⑤| HDMI input port 3| Connects to your source device by HDMI cable.
⑥| HDMI input port 2| Connects to your source device by HDMI cable.
⑦| HDMI input port 1| Connects to your source device by HDMI cable.
⑧| Analog audio ports| Synchronized output stereo analog audio, contains left
and right channels.
⑨| Digital audio port| Synchronized output digital audio by optical toslink
port
Picture 1.2 IR panel showing and function introduction
| /| Power standby button
---|---|---
| /| Power on button
1/2/3/4| SWITCH key| Input source channel selection
∧/∨| SWITCH key| Loop switch the input channels in order 1-4
2CH| EDID key| Audio EDID 2CH mode. Priority output stereo audio in this mode.
5.1CH| Audio EDID 5.1CH mode.
Priority output 5.1 channel bit stream in this mode. The analog output ports
have no output now.
PASS| Audio EDID PASS mode.
The audio output format is determined by the EDID information of the output
device (OUTA priority).
SPDIF/Ω| /| Digital and RCA audio output turn on / turn off
ARC| ARC key| ARC turn on / turn off
Auto| AUTO| Signal source input automatic detect function enabled or disabled.
-
- Please take out the film at the rear of the remote before you use. Please insert the film to remote rear if you do not use the remote for long time.
- Battery Type : CR2025 3V.
- Please take out the film at the rear of the remote before you use. Please insert the film to remote rear if you do not use the remote for long time.
Connection and operation
Matters needing attention
- Please use standard HDMI cable and connect the cable before powering the equipment.
- The output port OUTA can output audio only. Connect OUTA to the HDMI input port of the audio device (Power amplifier, Soundbar…) by an HDMI cable.
- The audio output of the audio ports can be turned on/off by using the “SPDIF” key on the remote control.
- Analog audio can only be output when the audio format is LPCM, so it is recommended to choose the EDID mode in 2CH mode when using analog audio output.
- If you want to use ARC or CEC, you must connect the TV to the OUTB port. Before using ARC, make sure your TV HDMI port supports ARC and the ARC have been turned on.
- The product has power off memory function. The setting state of the output channel is recorded and saved. After the power is off, the saved data will be automatically retrieved for configuration.
SPECIFICATIONS
| Model No. | HDSW0040M1 |
|---|---|
| Model name | 8K HDR HDMI Audio Extractor 4×1 |
| Input ports | HDMIx4 |
| Output ports | HDMIx2,RCAx2,Optical x1 |
| Video format |
- 480P/720P/1080P/2160P@24/25/30/50/60/100/120Hz
- Up to 4320P@50/60Hz(YCC420), Support HDR/Dolby Vision
Deep color|
- 8/10/12/16Bit@2160P
- 8/10bit@4320P
Audio format| Dolby HD/DTS HD/Dolby Atoms/Dolby AC3/DTS/LPCM Etc.
Transmission bandwidth| 1GHz Max.
Transmission rate| 40Gbps Max.
IR distance| ≤5m
Input cable length| 4320P/AWG 26 ≤3m；2160P/AWG 26 ≤5m；1080P/AWG 26 ≤10m
Output cable length| 4320P/AWG 26 ≤3m；2160P/AWG 26 ≤5m；1080P/AWG 26
≤12m
Power adapter specification| AC 100~240V/ DC 5V/1A
Max working current| 350mA
Working temperature range| -5 ~ +40℃
Working humidity range| 5 to 85%RH（No Condensation）
Storage temperature| -15 to 55℃
Storage humidity| 5 ~95%RH(No Condensation)
Size| 205x75x30 (mm)
Weight| 440g
Accessories| Manual, Remote, Power Adaptor
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>