AKONE AK-ZG-01 Portable Bluetooth Outdoor Speaker User Guide
- June 14, 2024
- AKONE
Table of Contents
QUICK START GUIDE
AK-ZG-01
WHAT’S IN THE BOX
TECH SPEC
| Transducer: | 48 mmx 76 mm |
|---|---|
| Speaker power: | 2 *40W RMS |
| Frequency response: | 45Hz- 20kHz |
| Signal-to-noise ratio: | > 80dB |
| Battery type:Battery charge time: | Li-ion polymer 37 Wh (equivalent to 3.7V/ |
10000mAh)
Music play time:| 6hours (5V/2A)
Type-C port:| up to 20 hours (dependent on volume level and audio content)
Bluetooth version:| 5V/2 A (maximum)
Bluetooth profle:| A2DP 1.3, AVRCP 1.6
Bluetooth transmitter frequency range:| 2400 MHz – 2483.5MHz
Bluetooth transmitter power:| < 10 dBm (EIRP)
2.4GHz SRD frequency range:| 2407 MHz – 2475 MHz
SRD transmitter power:| < 11 dBm (ERP)
Dimensions (WxHx D):| 310 x 112 x 171 mm/12.2 x 4.4 x 6.7 inch
Weight:| 2.65kg/ 5.841bs
To protect battery lifespan,fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. Do not expose the AK-ZG-01 to liquids without removing cable connection. Do not expose AK-ZG-01 to water while charging. It may result in permanent damage to the speaker or power source. Chemicals,salt or”foreign partidles” in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if notclean up off after use. After a liquid spill or rinse, do not charge your speaker until it’s completely dry and clean. Charging when wet might damage your speaker. (Try not to wash it directly with water, just wipe it with a paper towel or wet paper towel) When using an external adapter, the output voltage/current of the external adapter should not exceed 5V/2A.