OPOWO HU55-01A Humidifier for Bedroom Instruction Manual

: June 14, 2024
: OPOWO

Table of Contents

NAMES OF PARTS
BEFORE USING THE HUMIDIFIER
WHEN USING THE HUMIDIFIER
CARE & MAINTENANCE
AFTER USING THE HUMIDIFIER
FUNCTION CHARACTERISTICS
REMOTE FUNCTION
OPERATIONS GUIDE
SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OPOWO HU55-01A Humidifier for Bedroom Instruction Manual

NAMES OF PARTS

PARTS Description

BEFORE USING THE HUMIDIFIER

DO NOT use the humidifier if the cord has been damaged. Please check the cord for any signs of damage.
DO NOT place this humidifier in wet environments.
DO NOT plug the cord with wet hands. 12in 24in
Please always keep the humidifier out of reach of patients, children & pet.
Please always place the unit on a smooth, flat, lint-free, non-metallic, waterproof and level surface and keep it away from direct sunligh.
Always place the unit 24 inches (60 cm) above the floor, 12 inches (30 cm) away from the wall, other appliances or wooden furniture

WHEN USING THE HUMIDIFIER

DO NOT place the humidifier on an inclined surface.
DO NOT direct the mist nozzle towards the wall.
DO NOT use your hand or any other object to cover the nozzle while the unit is on to avoid damaging the product or causing injury.
DO NOT clean the unit while it is connected to a power source or while it is on.
DO NOT move the humidifier diagonally or at an angle.

CARE & MAINTENANCE

Only use the power cord supplied with the unit. Always unplug the power cord from electrical outlet before filling. Essential oil should not come in contact with the exterior surface of unit.

Do not submerge unit into water to avoid risk of electric shock.
Do not put fingers, hands, or any object into the unit while operating.
Do not attempt to adjust or repair the unit. Do not touch the water while unit is operating.
Do not fill water through the Mist Outlet or the Air Outlet.
Do not place the unit near heat sources or direct sunlight.
Use two hands when moving your humidifier.
Use this unit only as intended as described in this manual.

TO CLEAN:
Empty water from the Water Tank away from the Air Outlet. The Ceramic Disc should not come in contact with any hard or sharp objects. To remove possible buildup, rinse with a white vinegar and water solution. Dry thoroughly with a soft cloth. Do not use strong cleaning agents.

AFTER USING THE HUMIDIFIER

Always disconnect from a power source by pulling out the plug when not in use.
DO NOT attempt to repair or adjust any electrical or mechanical functions on this humidifier.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Unplug the appliance during filling and cleaning.

FUNCTION CHARACTERISTICS

When Power on, there will be a sound beep, the icon light will off after 1 second, and the unit will enter the standby state.

Power Button:
1st Press : turn on the unit on medium mist intensity with two grid mist indicator on.
2nd Press : turn off the unit;
Note : If water level is very low, the unit will not operating, and the mist indicator will continue blinking for 10 seconds.

Mist button:
1st Press : continuous diffusion on high mist intensity with three grid indicator on.
2nd Press : continuous diffusion on low mist intensity with one grid indicator on.
3rd Press : continuous diffusion on medium intensity with two grid indicator on. Cycle control.
Long press for 1.5 seconds to switch to the fragrance mode with breathing mist indicator on. There is no mist, and only the fragrance will be expanded. Long press again or short press humidity button / plant humidifying button/mist button to cancel fragrance mode. The unit will spray on medium intensity with two grid indicator on.

Humidity Button:( After turn on the humidifier)

1st Press to set 40%;
2nd Press to set 50%;
3rd Press to set 60%;
4th Press to set 70%;
5th Press to cancel humidity setting.
Long Press 1.5S can cancel humidity setting;

Note :

In constant humidity mode, when the ambient humidity reaches the set humidity value, the device will stop operating and the fan will stop operating after 20S; When the ambient humidity is lower than the set humidity, the device will operating again to ensure that the ambient humidity reaches the set humidity value;
Humidity button will not operating if the unit is under plant humidifying mode.

Timer Button: (After turn on the humidifier)
1st Press for 2Hrs,
2nd Press for 4Hrs,
3rd Press for 8Hrs,
4th Press to cancel timer. Long press 1.5S cancel timer setting.
Light Button & Sleep Mode:
1st press to turn on light in warm white color.
2nd press to turn off light. Long press 1.5S to enter sleep mode, LCD display will off, the unit operating on low mist. Touch any button can cancel sleep mode

Plant Humidifying button
Under this mode, the fan operates at higher speed, the unit operating intermittently in high misting mode with 0.5hrs on and 0.5hrs off. Three grid mist indicator and plant humidifying icon are always on.
1st press to enter plant humidifying mode and The humidity is set to 40%, suitable for dry and low humidity plants.
2nd press to switch to 60% humidity, suitable for middle humidity plants.
3rd press to switch to 80% humidity, suitable for high humidity plants.
4th press to cancel plant humidifying mode, the fan will operate at normal speed and the unit spray on medium intensity with two grid indicator on. Long press 1.5S cancel plant humidifying mode.
Note: In this mode, when the ambient humidity reaches the set humidity value, the device will stop operating and the fan will stop operating after 20S; When the ambient humidity is lower than the set humidity, the device will operating again to ensure that the ambient humidity reaches the set humidity value

REMOTE FUNCTION

Power button: 1st press to turn the unit on in medium misting mode, press again to turn off.
Mist decrease: decrease the amount of mist.
Mist increase: increase the amount of mist. :
reduce one level of selected function (timer, humidity, plant humidifying mode) by each press.
“+” : increase one level of selected function (timer, humidity, plant humidifying mode) by each press.

Humidity Button: (After Turing on the humidifier)
1st Press for 40%;
2nd Press for 50%;
3rd Press for 60%:
4th Press for 70%;
5th Press to cancel humidity setting. Long Press 1.5S can also cancel timer setting;

Timer Button: (After Turing on the humidifier)
1st Press for 2Hrs,
2nd Press for 4Hrs,
3rd Press for 8Hrs,
4th Press to cancel timer. Long Press 1.5S can also cancel humidity setting

Sleep Mode:
1st press to turn on light in warm white color.
2nd press to turn off light.
Long press 1.5S to enter sleep mode, LCD display will off the unit operating on low mist. Touch any button can cancel sleep mode;

Plant Humidifying button
Under this mode, the fan operates at higher speed, the unit operating intermittently in high misting mode with 0.5hrs on and 0.5hrs off. Three grid mist indicator and plant humidifying icon are always on.
1st press to enter plant humidifying mode and The humidity is set to 40%, suitable for dry and low humidity plants. 2nd press to switch to 60% humidity, suitable for middle humidity plants.
3rd press to switch to 80% humidity, suitable for high humidity plants.
4th press to cancel plant humidifying mode.

Water shortage protection:
When water levels are low, the buzzer alarms for 4s and the mist indicator blinks for 10s. The unit turns off and the fan stop operating after 20 seconds Note: in sleep mode, the buzzer will not alarm.

OPERATIONS GUIDE

Place unit on a flat, water-resistant surface as moisture may cause damage to carpet, finished floors, furniture, or walls.

Remove the Top Cover from the Water Tank.
Fill the Water Tank with filtered or distilled water up to the Max Water Level Line. Do not overfill.
Replace Top Cover onto the Water Tank.
Plug the Power Cord into an electrical wall outlet. It will take a few minutes for the essential oil to blend with the water before fragrance begins diffusing.

Usage of essential oil bottle

Unscrew the lid
Add 2ml essential oil into the bottle
Screw lid back on
Install the bottle into the slot

Note: please don’t add essential oil into the water tank directly.

If tap water is too hard, it is recommended to use filtered or distilled water to avoid white dust.
DO NOT add water with temperature exceeds 50 degree Celsius.
DO NOT add water into the air outlet or empty water from the air outlet.
DO NOT tilt the humidifier while the water tank is filled with water to avoid leakage and water into the air outlet.