NELKO P110 Portable Bluetooth Thermal Label Printer User Manual
- June 14, 2024
- Nelko
Table of Contents
NELKO P110 Portable Bluetooth Thermal Label Printer
Packing list
- P110 printer
- Label paper (40×30 mm)
- USB cable
- Manual
Warning
- The printer must be charged for at least 4 hours when using it for the first time or if left idle for over a month.
- Do not scratch the print head.
- Do not touch the print head immediately after printing as it can be very hot.
- Keep away from direct sunlight, water, dust, and other debris.
- Do not store in high temperature or humidity environments.
- Keep away from children.
- Stop using it immediately if the battery is discolored or deformed.
- Do not drop or smash the printer to avoid damage.
- Do not attempt any disassembly or repairs on your own. Contact sales for assistance.
Product Overview
How to use
- Power on the printer
- Press the power button for 2 seconds.
- Power off the printer
- Press the power button for 2 seconds.
- Load the paper
- Slide the side cover button to open the cover and install the roll paper (print side down).
- Search for and install the “Qlabel” app on the App Store or Google Play. Enable both Bluetooth and Location. Use the app to pair with the printer and then try printing.
- Note: Shutdown mode When the printer is idle for 10 minutes (adjustable through the settings), the printer will power off automatically.
Printer’s Settings
Viewing or Changing the Printer’s Settings
- While powered on, press the power/function button to enter Setup Mode.
- While in Setup Mode, the power/function button will switch to the next setting and the FEED button will change the selected setting.
Setting order
- Language: English/ Simple Chinese
- Shutdown Mode: 10 mins/ 20 mins / 30 mins/ never
- Paper type: label paper/ ordinary paper/ black label paper
- Printing color: Lightest 1-3 / Light 4-5 / Normal 6-9 / Dark 10-14 / Darkest 15
Print a test page
- Automatic calibration: this function is only available for black label paper and label paper
- ID address of this printer: press the power button to display the printer’s ID address
- Printer’s self-inspection: press the FEED button to display the relevant machine information and print a test page
Factory settings
- Press the FEED button to restore factory settings
Display status
- Bluetooth indicator. Illuminated when connected via Bluetooth
- USB indicator. Illuminated when connected via USB.
- Illuminates when in Setup Mode.
- Illuminates when out of paper or when paper is not loaded properly.
- Illuminates when plugged into a power source.
- Battery indicator. Blinks while charging.
Specification
Maintenance
- Wipe the printer surface and paper bin with a dry soft cloth.
- Clean the print head when print quality is not as good as before. Use a soft cloth with alcohol.
- Note: Before cleaning or maintenance, power off the printer first.
Troubleshooting
Note: Paper of low quality may cause damage to the print head.
Maintenance
- We offer an extensive warranty for all products that extends through 1 YEAR of the order date. This warranty covers quality related issues and product defects.
- If you are past the 30-day return period on Amazon, contact us directly via the”Contact seller” option on your Order Details.
- If the product is not working properly, we can send you a replacement product.
- This warranty does not apply in cases of abuse, mishandling, or unauthorized repair of the product.
- If you have any questions about this warranty or would like additional information, please contact us via the “Contact
- Seller” option or directly via e-mail (check the packing box).
- Please keep the original box, packing materials, and all documentation in the event that service is required.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 17 harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction. Thank
you for choosing the P110 label maker Keep this manual for future
reference
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>