ORICO CD2510 Personal Cloud Storage User Manual

ORICO CD2510 Personal Cloud Storage

Product illustration

CD2510

CD3510

1. Power switch button
   (Power on and off)

2. LAN network interface
   (Connect the LAN port of the network switch and router)

3. DC IN 12V
   (Power supply port)

4. RESET button
   (Restore factory Settings)

5. USB3.2 Gen1 Type-C interface
   (There are two modes of use:

   • Directly connected to the PC through the data cable and used as an external hard drive.
   • Directly connect external USB disks, portable hard disks, and disk cabinets to expand NAS storage space.)

6. System status indicator
   (Shows the working status of the system and network)

7. Disk indicator
   (Shows the working status of the hard disk)

Installing the hard disk
Take CD2510 for example, CD3510 is similar.

1. remove the cover from the top.
2. Align the SATA connector and insert the hard drive.
3. Turn the knob clockwise to secure the hard disk.
4. Close the cover and complete the installation.

Device Connection

NAS network mode

1. Using the network cable, connect one end to the network port of the CD2510 / CD3510, and the other end to the router LAN port.
2. Using the power adapter, connect one end to the power port of the CD2510 / CD3510, and the other end to the power socket. After the power supply is connected, the default system automatically powers on.

External hard drive mode (Used as an external hard drive)

1. Using the USB-C cable, connect one end to the USB-C port of the CD2510/CD3510, and the other end to the USB port of the PC.
2. Using the power adapter, connect one end to the DC IN 12V power connector of the CD2510/CD3510, and the other end to the power outlet. After the power supply is connected, the default system automatically powers on.

Note: In external hard drive mode, the network function will be turned off automatically. When the USB-C cable is disconnected, it automatically switches to NAS network mode.

Device startup and shutdown

1. Automatic power on by default:
   Startup: In the shutdown state, press the power button to turn on.
   Shutdown: Press and hold the power button for 3 seconds, and the device starts to shut down.

2. Remote shutdown (Required in NAS network mode): Shutdown through the client Weline APP operation.

Light Status

Working mode: NAS network mode

Client Download And Installation
Mobile Client
Please scan the “Weline” OR code below to download and install the APP .

Other Clients

Enter the address: http://www.weline.io download the client and install it.

User Registration And Login
Registered User

1. Please open and run the “Weline” APP on your mobile phone.
2. When using the APP for the first time, you need to register an account, please click ” Sign up ” and register with your mobile phone number or email address.

User Login

1. After the registration is complete, return to the login window.
   Enter your username and password to log in.

2. Log in successfully and go to the “Resources” page.

Device Binding

First, please make sure the device is working in NAS network mode!

1. Go to the “Resources” page, click the ” ” symbol, and then click “Scan OR Code” to scan the OR code of the CD2510 / CD3510 device.
2. Scan the code to bind the device successfully, click “ОК”

Owner/Administrator binding

1. The first user becomes the owner of the device after binding the device, and a device has only one owner.

Invited users to join

1. The invited user needs to scan the invitation QR code
   shared by the owner/administrator to join the device.

2. The sharing code is time-limited.

3. After scanning the QR code, invited users need to be confirmed by the owner/administrator before joining.

Device unbinding

• Owner unbind
  Owner unbinding can clear all data of himself and all invited users, and all users will no longer be able to use the device.

• • Invited users unbind
  The unbinding operation of an invited user only clears all personal data of the invited user, and other user data is not affected and can still be used.

  1. If you confirm the unbinding, please back up the data in CD2510 / CD3510 in advance.
  2. The data cleared due to unbinding cannot be recovered, please operate with caution.

Device Access

1. After completing the device binding, click “X net” network to enter and find the bound CD2510 XXXX / CD3510_XXXX device.
2. Click the CD2510_XXXX / CD3510_XXXX device nodes to to enter the APP homepage to use all functions.

Device reset instructions

If the user needs to reset the device, he can perform the reset operation by long pressing (10 seconds) the reset button (Reset) on the back of the device. This operation will reset the network settings set by the user, but will not affect the user’s storage to Data on the hard disk, please operate with caution.

Notice

1. Please do not hit, throw, or puncture the product, and avoid dropping, squeezing, or bending.
2. Please do not use or store this product in a humid environment and avoid being wetted or rinsed with liquids.
3. Please do not use the product in a hot, high-dust environment and keep it away from fire.
4. Please do not expose this product to the sun.
5. Please do not place this product in a corrosive environment. Do not use other chemical solutions to clean the product.
6. Please do not place the product or accessories in appliances with strong electromagnetic fields and away from magnetic equipment.
7. Please keep the product and accessories away from children. Do not allow children to use the product without supervision.
8. If you need a product with a power adapter, please use the power adapter specified by our company.
9. Please do not disassemble and repair the product or accessories without the authorization of ORICO.
10. If you have any questions during the use of this product, please feel free to contact your dealer or ORICO Customer Service Center.

Declaration
ORICO Technologies Co., Ltd., all rights reserved. Thank you so much for purchasing the ORICO product. Please refer to this manual when using this product or experiencing issues. Additionally, please kindly contact the ORICO customer care team if any concerns. ORICO® is a registered trademark of ORICO Technologies Co., Ltd.. Any other product, trademark, service or company mentioned herein is a trademark or registered trademark of the respective owners. This manual is for reference only and it’s not a guarantee. ORICO Technologies Co., Ltd. reserves all rights of maintenance to this manual and shall not be liable for any loss or damage resulting from this manual. ORICO Technologies Co., Ltd. shall not be liable for compensation and maintenance of the following conditions.

1. Any special, incidental, indirect and secondary lost or damage.
2. Profit and revenue lost or damaged.
3. Files, data, drive and device lost or damaged.
   Note: Compensation for lost or damage resulting from this manual or product shall not exceed the payment of your purchase of this product.

References

• ORICO - USB Storage Adapters, Chargers, Hubs, and More
• Weline | 链接无限

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>