CURLEE B0CHRT7BKV 4K 44MP Digital Camera User Manual

CURLEE B0CHRT7BKV 4K 44MP Digital Camera

Product Information

System Requirement| Intel Pentium 2.0GHz or higher/ Microsoft Windows XP or higher
operating system, 2GB RAM, 40GB above available disk memory,
Standard USB interface, 1GB GPU or higher, 1920×1080 pixel or
higher resolution.
---|---
Parts and Controls|

• Front side view: 1. Fill light, 2. Lens, 3. Display screen, 4.
  Charging/working indicator light, 5. Digital zoom zoom in, 6.
  Digital zoom out, 7. Up Button/light fill shortcut Button, 8. Right
  Button/shortcut Button for timing photo, 9. M Button, 10. Down
  Button/Delete Button, 11. Left Button/shortcut Button for
  continuous photo taking, 12. Menu Button/Menu return Button, 13.
  Playback Button

• Top side view: 1. Power button, 2. Photo button

• Bottom side view: 1. Tripod interface, 2. Battery/memory card
  slotLeft side view: 1. Type-C USB interface

Functions|

• POWER
• PHOTO
• Indicator light
• + – Up
• Right
• M
• Down
• Left
• MENU
• Playback
• USB

Menu Settings|

• Exposure
• Filter
• White Balance
• Scenes
• Metering Mode
• ISO
• Image Rotation
• Frequency LED Indicator Light
• Auto Screen Saver
• Volume
• Startup Music
• Auto Shutdown Time
• Watermark

Product Usage Instructions

Charging the battery

1. Turn off the power of the camera, open the battery cover, insert the battery in the direction shown in the figure below, and then close the battery cover.
2. You can use the supplied USB cable to charge your camera via an adapter (5V/1A~5V/2A).

The charging indicator will be turned on in red when the battery is charging. The indicator will be turned off automatically when the battery is fully charged. It typically takes around 2 hours for the battery to fully charge. When fully charged, the battery provides approximately 70 minutes of recording time.

Power on/off the camcorder

To turn on the camera, press the power button. The camera will turn on automatically.
To turn off the camera, press and hold the power button for 3 seconds.

Note: When you turn on the camera for the first time, you need to press and hold the power button to turn it on. When there is no battery in the battery compartment, you need to press and hold the power button to turn on the camera after you insert the battery.

Set the camcorder
You can make custom settings for the camera. After the camera is turned on, press the menu button to open the menu settings.

WARNING
To reduce the risk of fire or electric shock,

1. Do not expose the unit to rain or moisture.
2. Do not place objects filled with liquids, such as vases, on the apparatus.
3. Do not expose the batteries to excessive heat such as sunshine, fire, or the like.
4. Do not ingest batteries, chemical burn hazard.
5. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
6. If you think batteries might have been swallowed or placed inside any part of your body, seek immediate medical attention.

CAUTION

• If the battery is mishandled, the battery pack can burst, cause a fire, or even chemical burns. Observe the following cautions.
• Do not disassemble.
• Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping, or stepping on it.
• Do not short-circuit and do not allow metal objects to come into contact with the battery terminals.
• Do not expose to high temperatures above 60°C (140°F) such as in direct sunlight or a car parked in the sun.
• Do not incinerate or dispose of in a fire.
• Do not handle damaged or leaking lithium ion batteries.
• Keep the battery pack out of the reach of small children.
• Keep the surface of the battery pack dry.
• Replace the battery with the specified type only. Otherwise, a burst, fire, or injury may result.
• Dispose of used batteries according to the instructions.
• Use a nearby wall outlet(wall socket) when using the AC Adapter/
• Battery charger. If any malfunction occurs, disconnect the plug from the wall outlet (wall socket) immediately to disconnect from the power source. If you use the product with a charge lamp, note that the product is not disconnected from the power source even when the lamp turns off.
• Do not use the AC adapter/Battery charger placed in a narrow space, such as between a wall and furniture.
• If static electricity or electromagnetism cause data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

About the camera

System requirement

• Users can transfer videos and photos to computers with the following configurations:
• Intel Pentium 2.0GHz or higher/ Microsoft Windows XP or higher operating system 2GB RAM 40GB above available disk memory/
• Standard USB interface / 1GB GPU or higher 1920×1080 pixel or higher resolution.

Parts and controls

1. Fill light
2. Lens
3. Display screen
4. Charging/working indicator light
5. Digital zoom zoom in
6. Digital zoom out
7. Up Button/light fill shortcut Button
8. Right Button/shortcut Button for timing photo
9. M Button
10. Down Button/Delete Button
11. Left Button/shortcut Button for continuous photo-taking
12. Menu Button/Menu Return Button
13. Playback Button

1. Power button
2. Photo button
3. Tripod interface
4. Battery/memory card slot

Left side view

POWER

| Power on / off
Pause of recording

PHOTO

| Take photo
Start/end recording
Half press to focus
Indicator light| Red charging indicator/Blue working indicator
“+”| Digital zoom zoom in
“-“| Digital zoom zoom out

Up

| Upward
Turn on/off the fill light

Right

| Rightward
Short press in photo mode to switch to timing photo

M

| Confirm
Short press to switch between video mode and photo mode

Down

| Downward
Delete photo/video

Left

| Leftward
Short press in camera mode to switch to continuous camera
MENU| Open/exit menu settings and system settings
Playback| Open/Exit Media Playback

USB

| USB cable charging
Connect the computer with a USB cable

Charging the battery

1. Turn off the power of the camera, open the battery cover, insert the battery in the direction shown in the figure below, and then close the battery cover.
2. You can use the supplied USB cable to charge your camera via an adapter (5V/1A~5V/2A) .
3. The charging indicator will be turned on in red when the battery is in charge.
4. The charging indicator will be turned off automatically when the battery is fully
   charged.
   Normally it takes around 2 hours to fully charge the battery. When the battery is fully charged, the battery life is around 70 minutes for recording.

Power on/off the camcorder

Press the power button, the camera will turn on automatically.

To turn off the camera, press and hold the power button for 3 seconds. Note: When you turn on the camera for the first time, you need to press and hold the power button to turn it on.When there is no battery in the battery compartment, you need to press and hold the power button to turn on the camera after you put the battery in.

Set the camcorder

• You can make custom settings of the camera.
• After the camera is turned on, press the menu button to open the menu settings.

Menu Section

Language

| Simplified Chinese/traditional Chinese/ English/ Japanese/Korean/Russian/German/ French/Italian/ Spanish/Portuguese/Thai
---|---
Date Time| Year/Month/Day Hour/Minute/Second
Format| (Micro Card)Format/Cancel
Firmware Version| Product model and version number
Factory To Reset| Confirm/Cancel

Insert and format the memory card

A class 10 or higher speed memory card is recommended to normal use. 1.Open the battery cover, and insert the memory card until hear the
“click” sound.

To remove the memory card, open the cover and push the memory card it will be popup automatically.

Format the memory card
It is recommended to format the memory card before the first use. Format the memory card, press the menu button to open the menu, then press the left or right button to switch to system settings. Press the Up or Down button until “Format,” then press the M button to get the sub menu. Select Format to format the memory card.

Note: If the memory card is not formatted, a prompt will pop up on the screen: “Unsupported file system, do you want to format?”, please format the memory card according to the above operation. Formatting the memory card will erase all data stored on it, and the data will be unrecoverable. Save important data to your PC before formatting.

Using the camcorder
After the camera is turned on, it defaults to video shooting mode. Press the M button to switch between photo mode and video mode, press the menu button to enter the menu to set other modes.

• The camera supports setting the corresponding mode menu in different modes.
• After selecting the desired mode, press the menu button to enter the menu and select the desired setting if desired.
• Press the photo button to take a photo, and the photo will be automatically saved to the memory card.
• In video mode, press the photo button to start recording, and press the photo button again to stop recording. During recording, you can also press the power button to pause/continue recording.

1. Photo button (video start/end button)
   Press to start recording, then press to end recording

2. Indicator light
   The working indicator light flashes when recording

3. Digital zoom button “+” button digital zoom zoom in/”-” button digital zoom zoom out.

Fill light

• In video mode, pressing the up button can quickly turn on or off the fill light.
• In photo mode, the fill light has three flash modes, and pressing the up button can quickly switch between the three modes.

Note: When the fill light is in automatic flash mode, it will only flash when taking photos in a relatively dark environment. When switched to forced flash mode, the fill light will always be on.

Playback
Press the playback button to enter media playback. Press the Left/Right button to view videos and images stored in the camera memory card.

1. You can use”+” “-” to zoom in and out when viewing photos
2. Press the M button to play/pause a video.
3. Press the down button to delete a photo/video.
   Note: Once deleted, it cannot be recovered.

Connect to computer

1. Connect the Type-C USB port of the camera and the USB port of the computer with supp lied USB cable.
2. The camera will turn on automatically and the screen will display the available options.
   Press the Up/Down button to select the desired option, then press the M button to confirm the setting.

Charging Mode
Select the charging mode, the camcorder supports the function of recording normally. Power off the camcorder would be fully charged faster then keep powering on.

USB Mode
Select “USB mode” and the computer will display the camera’s memory card drive. You can transfer files from the storage to the computer on the computer.

PC Camera
Select the “PC Camera” mode, the camera can be used as a webcam, live streaming, etc.

Note: When the camera is used as a webcam, only the digital zoom button can be operated on the camera and other functions cannot be used.

Camera cleaning and maintenance

1. If you do not use the camera for a long time, take out the camera battery and place it in a dust-free, dry environment with a temperature no higher than 30 ℃.
2. To extend the service life of the battery, please discharge it completely before storage.
3. Please fully discharge the battery at least once every 3 months after it has been fully charged.
4. If there is dust or dirt on the lens or screen, gently wipe it with a clean, soft lens cleaning cloth.
5. As this machine is a precision instrument, please do not drop it or suffer from strong impact or vibration.

Troubleshooting

If you encounter problems with the camera, please refer to this section.

1. The camera cannot be turned on after installing the battery

   • The battery power is insufficient, please replace the battery with a new one or charge the battery.
   • The battery is installed in reverse, please confirm that the battery is installed correctly.
   • The battery-insulating paper is not removed.

2. The battery is not charging

   • If the red light of the charging indicator flashes, the battery is not in place or the contact is poor. Please re-install the battery until the indicator light is on (the indicator light goes out when the battery is fully charged)
   • The charging indicator light is off and the charger is not plugged in properly. Please check whether the charger is connected normally.
   • The ambient temperature is lower than 10℃, which may lead to slow charging or failure to charge.

3. Camera crashes
   Quickly pressing each button of the camera may cause the camera to freeze. After it crashes, unplug the battery and reboot.
   Tip: When the camera is recording or taking pictures, do not quickly press the camera button. Under normal circumstances, the camera will display a waiting icon.

4. The memory card cannot be recognized:

5. Please check whether the memory card complies with the TF card (class10), the maximum is not more than 256G.

6. Please check whether the memory card is inserted backward.

7. When the memory card is used on the camera for the first time, it is recommended to format it first.

Additional notes

1. Do not insert any object into the slot except the memory card.
2. After the power is turned on, the camera may show an unstable image for a few seconds, but this is not a fault.
3. Due to the optical properties of the lens, there may be color dispersion (magnification of chromatic aberration) at the edges of the image. This is not a camera fault.
4. It is normal for the memory card to get hot after a long period of use.
5. It is normal for the camera’s screen to heat up after a long period of use.

Read me before use！
Keep the manual and all relevant information for future reference.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>