ENEGON NP-FZ100 Battery Replacement Battery User Manual
- June 14, 2024
- ENEGON
Table of Contents
ENEGON NP-FZ100 Battery Replacement Battery
Product Specification
- Replace Original Battery Model: NP-FZ100
- Battery Type: Li-ion Rechargeable Battery
- Single Battery Capacity: 2800mAh
- Voltage: 7.2V
- Weight: 81.6‡5 g / pcs
- Size: 51.8 X 38.8 X 22.6 mm
- Battery Power: 20.16Wh
- Operating Temperature: Charge: 50°F- 113°F/ Discharge: 14°F- 122°F
NOTE
- Be sure to charge the battery before using it for the first time.
- It is strictly forbidden to immerse the battery in seawater or water. When not in use, it should be placed in cool and dry environment.
- Keep the battery away from fire and heat, such as fire and heater, etc.
- Please use a special charger for Lithium-ion battery when charging.
- Do not use metal to directly connect the positive and negative electrodes of the battery, which will cause short circuit.
- Do not knock or throw, step on the battery, etc.
- Do not directly weld the battery and pierce the battery with nails or other sharp objects.
- Do not use or place the battery in high temperature (under a scorching sun or in the car with a high temperature), which will cause the battery to overheat, catch fire or fail to function properly, and even will shorten its life span.
- If the battery emits odor, heat, discoloration, deformation, or any abnormality during use, storage, or charging, please immediately remove the battery from the device or charger and stop using it.
18-month limited warranty
Lifetime technical support
Contact us :
support@enegonelectronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>