ENEGON LP-E10 Replacement Battery and Rapid Dual Charger User Guide
- June 9, 2024
- ENEGON
Table of Contents
ENEGON LP-E10 Replacement Battery and Rapid Dual Charger
Specification
- Brand ENEGON
- Model LP-E10
- Battery Capacity 1200mAh * 2 lp-e10 battery
- Battery Voltage 7.4V, 8.9Wh
- Battery type Li-ion
- Charging Status LED
- Charger Input 5V/2A max micro USB
- Charger Output 8.4V/800mA*2
- Charging time 70 mins 2 batteries
- Battery Life Recharged up to 2100 times
- Package Dimensions 4.41 x 3.07 x 1.85 inches
- Item Weight 6 ounces
What’s In the Box
- 2 x Batteries
- Dual Charger
- Micro-USB Cable
Introduction
Leading manufacturer of high-end replacement batteries and smart gadgets, ENEGON. We provide a comprehensive selection of goods, such as portable chargers, power tools, charging stations, and accessories for cameras, smart home devices, and accessories for campaigns, travel, and outdoor activities. With ENEGON services, say welcome to a simpler, more intelligent life. We make sure you receive prompt, hassle-free service when you require it.
Several Options for Charging
With the ENEGON kit, you can charge your batteries on the road using a wall charger, a car charger, a portable power bank, or any other USB output device.
How to Charge Batteries
Charging Indicator
- LED lights flash red and green back and forth when the charger is turned on (without batteries)
- LED lights change from RED to GREEN when they have finished charging.
Product Description
With the ENEGON Rechargeable LP-E10 Battery and Charger Kit for Canon T3/T5 Series Cameras, you won’t have to stress about your camera’s battery dying while you’re shooting and can instead focus on capturing beautiful moments. It includes two fully compatible replacement batteries and a dual-slot LED charger.
Safety Instructions
- To reduce the risk of injury, charge only 24V, 7-18AH lead acid rechargeable batteries with the charger.
- Do not charge a non-rechargeable battery. Other types of batteries might burst, causing personal injury or other damage!
- Do not disassemble the charger. Has it been serviced or repaired by qualified service personnel? Incorrect assembly can result in a risk of electric shock or fire.
- Never use the charger as a DC power source for any electrical equipment.
- Never operate a charger with a damaged cord or plug. Inspect both input and output cords for any damage before using the charger.
- Never unplug a cord by pulling on the cord itself. Always grasp the plug when disconnecting the charger.
- For indoor use only. Do not expose the charger to rain, snow or excessive moisture.
- Never charge a frozen battery.
- The battery must be placed in a well-ventilated area during charging
- Do not use the charger while the equipment is operating.
Compatible Models
EOS Rebel T3, T5, T6, T7, and T100 models Canon EOS Kiss X50, X70, X80, and X90 cameras 1100D, 1200D, 1300D, 1500D, 2000D, 3000D, and 4000D Canon EOS It is compatible with t6, BUT NOT with t6i.
Features
-
ALMOST COMPATIBLE
Battery Pack and Charger Replacement for Canon LP-E10, LC-E10, LC-E10C, and LC-E10E. Just the same as the Original -
EXCELLENT QUALITY & CAPACITY
High-end cells produce reliable batteries. With a 1200mAh high capacity, you can record videos for longer and take more pictures. -
DUAL RAPID CHARGER
Rapidly charge two batteries at once using any USB power supply. (Input: 5V/2A, Output: 8.4V/0.8A*2) Battery Charger 1, LED lights flash red and green in alternating patterns when the charger is turned on (without batteries) 2, LED lights change from GREEN to RED to indicate when they are fully charged. -
SECURITY GUARANTEE OF 100%
Built-in surge protection, overcharging prevention, short-circuit protection, high-temperature protection, and multiple-circuit protection
FAQs
What is the difference between ENEGON LP-E10 and Canon LP-E10?****
ENEGON LP-E10 is a replacement battery for Canon LP-E10. It has the same capacity as the Canon LP-E10 battery and can be used in the same way as the Canon LP-E10 battery. But it is not an original Canon product.
How long does it take to charge the ENEGON LP-E10?****
It takes about 70 minutes to fully charge 2 batteries.
Does this charger come with a wall adapter?****
Yes, it does. The wall adapter is included in the package.
Can I use this charger to charge other batteries?****
No, you cannot use this charger to charge other batteries except ENEGON LP-E10 batteries.
How do you keep dual batteries charged?****
A solar-powered DC-to-DC charger offers the best of both worlds. This is a more effective method of controlling the input to your battery from both sources without permanently harming the battery. These components separate the two batteries when the engine is off and enable both batteries to charge when the car is driving.
How does a dual battery system work?****
In a dual-battery system, a secondary battery is used in addition to the starter battery of the car. This secondary battery powers the auxiliary equipment and accessories.
How long does it take for a battery charger to work?****
Charging a standard car battery with a common charge amp of around 4-8 amperes will take roughly 10-24 hours to charge it entirely. It would take about 2-4 hours to sufficiently charge your battery so that you could start the engine.
How long will a dual battery last?****
But, a 60-liter refrigerator and a 100-amp hour battery provide a runtime of roughly 2-3 days. That is, if you don’t have children. If you have children who constantly open the refrigerator, you’ll probably receive one day.
Which battery is best for a dual battery setup?****
Ordinary lead acid batteries are fantastic all-rounder batteries, especially for someone putting up their first twin-battery system. They can also be put in the engine bay if there isn’t enough canopy space, making them very adaptable batteries in terms of installation placement.
Does a dual battery need to be a deep cycle?****
A deep cycle battery, such as an Odyssey or Optima, or a standard automobile battery can power a dual battery setup. You can mix and match with some dual battery configurations. So, in your twin battery arrangement, you do not even need to operate two of the same batteries.
How do I know if my dual battery isolator is working?****
Verify the battery’s voltage. You have another issue if the voltage at the battery and the isolator is not nearly the same (less a slight voltage drop through the line). You are likely only seeing the battery voltage if the voltage is 12.7 volts or lower and no charging at all is taking on.
Do you need an isolator for dual batteries ?****
Indeed, it’s crucial to have a second battery isolator since the home battery system must remain entirely isolated from the chassis battery. Battery isolators effectively ensure that the system as a whole won’t be harmed by the failure or exhaustion of one battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>