HUNDA 150W USB GaN Charger Instruction Manual
- June 14, 2024
- HUNDA
Table of Contents
150W USB GaN Charger
Instruction Manual
150W USB GaN Charger
HUNDA’s 150W 2C2A four-port fast charger, the total output power of this desktop charger can reach 150W, the maximum output power of the USB-C port is 100W, and the other two USB-A ports have a maximum output power of 18W. 4 USB ports actual output power will be intelligently distributed according to the power demanded by the device, supporting blind plugging. In addition, the product supports QC4+, PD3.0 and 5A PPS fast charging protocols, and is widely compatible with 100WPD fast charging and Huawei 22.5W SCP fast charging, so it can handle all kinds of devices. Here we will disassemble this charger.
Packaging
In the middle of the box is a diagram of the
product, with the HUNDA brand logo in the upper right corner, single-port
power of 100W/65W/18W, 150W and GaN in the upper left corner, and 4-port fast
charging, fast charging protocols and compatible electronic devices in the
bottom.
The back of the box is printed with a diagram of the product in use, English product output specifications, 0manufacturer information, and certifications.
- Total output power 150W.
- Model:A1904-106
- INPUT:100V-240Vac 50-60Hz Mav2.0A
- OUTPUT POWER:150W(Total)
- USB-C PD100W:5V/9V/12V/15V=3A,20V=5A(Each)
- USB-A:3.6-6V=3A,6-9V=2A,9-12V=1.5A(Each)
The side of the
product has the technical information of USB-C PD and PPS, and the yellow part
is printed with UV varnish.
Open the package, there are pearl cotton inside to fix and
protect the product to avoid touching the product in transit. The charger is
packed in a dustproof bag. 150W GAN PD Charger package contents: charger,
cable, plug, instruction manual.
Interface Configuration
Two green USB-C female sockets support power blind plug function, single port supports up to 100W PD fast charging output; two orange USB-A ports support 18W multi-protocol output, new and old devices can be used. The four ports can charge up to four devices simultaneously to meet the charging needs of multidevice users.
Specific parameters
- Model: A1904-106
- Input: 100-240V~2.0A 50-60Hz
- Total output: 150W (Max)
- USB-C output: 5V/ 9V/ 12V/15V＝3A, 20V＝5A
- PPS: 3.3-20V＝5A (Each)
- USB-A: 3.6-6V＝3A, 6-9V＝2A, 9-12V＝1.5A(Each)
Size and weight
Dimensions are 30.58mm X 74.15mm X 89.881mm
Weight Weight is 288.7g
PD fast charging protocol
Using POWER-Z KT002 USB tester to read PDO messages, USB-C1/C2
has the same PDO, both support 5V3A / 9V3A / 12V3A / 15V3A / 20V5A five fixed
voltage output gear, in addition to the 3.3-21V5A set of PPS voltage subset.
Fast charging protocol
Apart from supporting the USB PD fast charging standard,
USB-C1/C2 and USB-A1/A2 come with a variety of common fast charging protocols,
found by fast charging protocol polling with APPLE2.4A, Samsung5V2A, QC3.0,
QC2.0, DCP, AFC, FCP, PE and other common fast charging protocols for use with
new and old devices.
Disassembly
PCB board front overview, the front of the board on both sides of the
component planning layout is very neat, the center placed a large capacitor,
the output side with a number of small board, can improve space utilization to
reduce the size of the charger. The reverse side of the PCB board at a glance.
Summary
150W GaN charger is made of GaN power devices, which can put 150W super high
output performance in a small volume, 2C2A interface supports 100W high power
PD fast charging, and supports 4 devices charging simultaneously, one charger
can meet the charging needs of cell phones, tablets and laptops.