COMPAQ CMQ100W Portable Wireless Speaker User Guide

COMPAQ CMQ100W Portable Wireless Speaker

Product Information

This device is designed to comply with part 15 of the FCC Rules, ensuring that it operates within certain limits to prevent harmful interference. It also meets the FCC radiation exposure limits for an uncontrolled environment.

Product Usage Instructions

1. Caution: Do not make any changes or modifications to this device that have not been explicitly approved by the manufacturer. Unauthorized modifications may void your authority to operate this equipment.
2. To ensure compliance with FCC regulations, this device must be operated under the following conditions:
3. This device should not cause harmful interference to other devices.
4. This device must accept any interference it receives, even if it results in undesired operation.
5. For your safety, it is recommended to install and operate this equipment with a minimum distance of 0cm between the radiator (the emitting part) and your body. This will help ensure compliance with FCC radiation exposure limits.

Please refer to the complete user manual for additional instructions and guidelines on the safe and proper usage of this product.

Technical Specifications

• Wireless standard: 5.1
• Transmission distance: 1 O meters
• Output power:50W+15W”2+1 0W’2
• Playing time: 3 – 6 Hours
• Frequency effect:80Hz-15Khz
• Speaker: 5″ woofer+3″2 mediant +2 .5″2 tweeter
• Input power: 5V 2A
• Maximum current consumption: 2A
• Battery type: 18650 lithium-ion battery 15600mAh
• Audio signal input interface: standard C!>3.5mm headphone jack (stereo)

Features

1. Wireless connection
2. Memory function, breakpoint resuming
3. Support U disk / TFcard / AUX playback mode
4. Built-in lithium-ion battery
5. Support MP3/ WAV/ WMA/ FLAC/ APE music format decoding
6. Using high-fidelity speakers, the sound is more natural and delicate
7. Level 6 waterproof
8. 1 +1 device serial connection function
9. Wear a wireless microphone

Button instruction

CMQ1D0W button indication section view

1. Key-
   Click: Previous

2. EQ key
   Click: Change music mode (indoor mode/outdoor mode/karaoke mode)

3. On button
   Long press the switch for about 3 seconds/time
   Click: Play/Pause

4. Knob
   Rotate to increase the volume to the right and decrease the volume to the left

5. Power indicator

6. Serial key
   Click: Tandem/Exit Tandem
   Long press: switch functions

7. Lamp button
   Click: toggle light mode
   Long press: switch the lamp
   Double click: exit/connect back to Bluetooth connection

8. Key+
   Click: Next

9. AUXjack
   standard Cl> 3.5mm headphone jack

10. USB connector
    When the USB stick is inserted. it defaults to USB playback mode

11. TFjack
    When the TF card is inserted, the default is the TF card playing mode

12. Type-C jack
    Charging line interface. When the Type-C charging line is inserted, the device is charged by default

Directions for use

1. Wireless pairing

2. Before using wireless pairing, first turn on the audio power, it is already the default wireless model.

3. Turn on the wireless device, search forCMQ100W, connect and pair, connect After success, start playing music experience.

4. Suitable for various mobile phone accessories wireless technology, wireless adapter, wireless player.

5. Voice prompt

6. There is a voice prompt when turning on/off;

7. When the volume is increased to the maximum volume, there will be a voice prompt, and the minimum volume will not have a voice prompt.

8. Automatically shut down after detecting the low power prompt for 3 times;

9. Mode switching

10. It enters the wireless mode by default when it is turned on. The sequence of mode switching is as follows: Wireless mode-TF card mode-USB mode-AUX mode.

11. Mode: Post-insertion priority.

12. TWS Operating Instructions
    Open any two speakers at the same time, click one TWS serial key.
    When you hear the “beep” to enter the TWS search, when the TWS connection is successful, When the connection prompt tone sounds, the host indicator flashes and the copilot lights up,

13. Play indicator
    Wireless search status: white light flashing, about 0.5 seconds/time;
    Wireless pairing status: white light is always on Play status: the white light flashes slowly for about 1 second/time;

14. Charging indicator
    When charging, 3 water lamps flash from left to right Battery 35%, the first one is normally on, and 2.3 flashes 70% of the power, the 1-2 are normally on, and the 3 are flashing
    The 1-2-3 are always on when the power is 100%

15. Volume
    Turn on the default speaker volume at 70%.

16. Charging and using:
    This machine has a built-in overcharge protection circuit, which can be connected to a computer or charger for a  long time, about four hours Charging is complete.
    The play time of each battery will vary depending on the volume used rather different.

17. If there is no working state, it will automatically shut down after 15 minutes.

Troubleshooting

1. Automatic shutdown: When the battery power is low, the battery protection will be turned on automatically, please charge it for 4 hours before use.
2. Unable to play music: The music file storage path cannot be recognized by the player. Please store the music file in the root directory of the removable device.
3. There is no sound when connected to the computer: the computer interface is conne cted incorrectly, please select the correct audio output port
4. There is no response to the keys or the function is disordered: try again after shutting down.
5. When the machine is abnormal, use a slender round bar to press the RESET hole behind the AUX to reset

Product Warranty

• Username:
• Contact number:
• Date of purchase:
• Product number:
• Maintenance failure

Note: The warranty period is one year

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>